Few TIG welders know the difference between 3 aiming methods ! Lap joint welding
![weld [HAGOJIBI]](http://yt3.ggpht.com/ytc/AIdro_lButtTy6bwshHHOdUuuc7ktsddm0YgRj2FhqoPUm3aQA=s48-c-k-c0x00ffffff-no-rj)
Вставка
- Опубліковано 5 сер 2023
- For information on welding machines and peripherals, you can get more accurate answers by contacting the manufacturer.
↓↓↓↓↓↓↓
korea@nswel.com
Hello everyone.
There are many cases of TIG welding lap joints with "WALKING THE CUP techniques".
In this case, a slight aiming position may produce different results.
Of course, the thickness of the welding rod will also affect the welding.
It would be interesting to find a welding method that suits your taste.
Thanks for watching and have a nice week.
#pad
#TIG
#welding
#comparison
#test
#factory
#machine
#crafts
#tips
#secret
#trick
#amazing
#DIY
#idea
#future
#technology
#technique
#pipe
#HAGOJIBI
#video
My TIG welding is getting really good because of you :) THANK YOU.
All of your videos a great, but I really like this one. I think it speaks alot about your level of skill and capabilities as a welder that you can provide such a valuable and relevant education on tig welding often times using nothing more than a logical progression of demonstrations along with easy to follow hand signals. Not to mention that judging from the comments, people of many races and nationalities benefit from your videos which to me also suggests that in that way you are bringing the world together in times where "leaders" would like us to believe we are all different and apart, but through a common passion which you have taken time to assisit us all with youve shown thats not true. Great job brother!
1: 내려갈때 전진하는 N위빙: 텅스텐 끝이 밖으로 나가서 물도 부족하고 언더컷 발생
2: 올라갈때 전진하는 N위빙:
양끝에서 최대한 11자로 정렬, 예쁘게 됨
3. 그냥 8자 위빙. 텅스텐 끝이 좌우로 향함
오늘도 좋은 영상 감사합니다^^~
Cuesta mucho ver las diferencias, pero buena clase maestro, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia)👍🤓😜
Miy buen tutorial, claro, ilustratibo y practico.
Saludos.
I like the music you use. 👍🏻
Awesome tig work
Super good clarity
Good argon weldingtricks friend, keep strong
Me quedo con la segunda opcion de soldadura👌. Saludos de Argentina!
Merci
영상 잘 보고 있습니다. 스탠 4T 오버헤드를 키홀이 아닌 달고가는 설명과 함께 영상을 볼 수 있었으면 좋겠습니다. 좁은갭과 넓은갭으로 설명해 주시면 좋을 듯 싶습니다.
1은 윗부분 언더컷 3은 아랫부분 오버랩 따라서2번이 젤 낫다.. 그 말씀인거 같네요
잘보고 갑니다. 단차있는 제품 백비드 내는 영상 올려 주시면 감사 하겠습니다 🙏
Sim mestre observei que deve ser depositado o material de adição de forma que seja considerado o material inferior e modulando uma soldagem mais ampla derretendo o material superior ficando assim uma bela solda sem excesso obrigado pela orientação 🙏
ชอบมีเสียงพูดมากกว่า ถึงฟังไม่รู้เรื่องก็เพลินดีครับ
พอฟังออกบ้าง สำเหนียงเกาหลีเขาน่ารักดี เหมือนแกล้งดัดเสียงเลย น่าจะคนทางใต้
3 good 👍
위쪽을 더 올리고 덜 올리고 차이같은데 2번이 잘나온다는 영상인지요?
Видео хорошее и понятное, но нужны небольшие комментарии в виде субтитров.
O 3 passe parece me o mais indicado para o tipo de junta
You really need to talk. Your hand signs are not completely understandable.
But this is too big, why not little bit thinning
2번 3번은 무슨차이죠?>
Could you start talking on your videos as before? I think it was much better
I want to join you work
Was the no, melting the edge and bringing it down, as if you were using no filler wire? 7.05 video time
Need macros/cross sections to see penetration for a good comparison. Good looking welds can have terrible strength and lots of lack of fusion with weaving techniques
2 😎🔥🔥🔥🔥🔥🔥🔥
Con menos ,se vería mejor..mucho material innecesario.Le apunto tiene buena técnica,solo tendría que definir si es necesario esa cantidad de soldadura en relación con la función de la pieza
1,3번 둘 다 봉 주입 제대로 안되서 모재 제살 다 파먹었고 위아래 한쪽으로 쏠려서 용접부에 용입이 제대로 안됐음 2번이 용입 되야 할곳에 봉 주입도 제대로 되서 용접 잘됐음
Words are better than fingers !!!!!!!!¡
👍👍👍👍👍👍👍👍👍👍👍👍👍👍
첫번째 용접할때 위빙이 쇳물을 위에서 아래로 끌어내리고
두번째 용접은 쇳물을 위아래로 균일하게
세번째 용접은 쇳물을 위로 끌어올리고 같네요
전달 하고자 하는건 용입이 두번째가 좋다는것인가요?
asme 섹션9에서 필렛용접의각장과 각목은 이등변 직각삼각형의 한변의 길이와 빗변과 직각부를 직교하는 길이로 나타냅니다 따라서
가장 이상적인 필렛용접은 이등변 직각 삼각형 형태라고 볼 수 있습니다.
1번의 방법으로는 윗부분이 볼록할 수 있어이상적이지 않고 3번은 아랫부분이 볼록할 수 있어 이상적이지 않습니다. 2번의 방법으로 작업할때 이상에 가까운 비드가 만들어지기 쉽다는 설명이신거 같아요.
용입과는 별개의 문제입니다
영상 잘보고있습니다 근데 용접하는 영상은 카메라로 찍으신건가요?헬멧에 붙여서 아님 어떻게 찍으신건가요? 설명좀 부탁드려요
How does this stainless steel not distort with all that heat input???
Сколько подача газа???
Если цель - сформировать между стыкуемыми деталями катет 45°, то на кой тут надобно размашисто переплавлять кромки в проходах 1 и 3, где кроме как конских деформаций и бессмысленного перерасхода прутка и времени, иных результатов получить невозможно.
요즘 말씀을 왜 안 하시는지??
Il costo della saldatrice al tig
I would have free handed it
A little slower handwriting will be ok
Что пальцами показывал, ничего не понял
Bei anderen Beiträgen von ihnen hab ich ihre Zeichensprache schon nicht verstanden. Und jetzt hier das selbe. Man sprechen sie doch einfach oder schreiben es als Untertitel rein. Dafür gibs nin daumen nach unten sorry!
Creí que es mudo 😂
SS 316L butt joint
😅😂
I dnt udrstnd
1 = 2 = 3, and all these methods are unnecessary for this joint 😂
😂😂😂 wwaaaaayyyyyyyyy unnecessary!!!!!!! You'll have that on these big jobs tho!
1등!
Немой?
Sorry amateur welder
666