How to Replace Your Scooter Tire - Flat Tube Repair on your Xiaomi M365 or Hover 1 Tyre
Вставка
- Опубліковано 10 лют 2025
- I had a flat tire on my kids Hover 1 scooter. This 8.5" tube needed replacing and it was very difficult to do. You have to uncover some hidden screws behind a sticker and you have to remove the brakes and reset them correctly. I'm walking you through this tube replacement so you can do this with less trouble than I had the first time.
Pick up your 8.5-Inch Inner Tubes for Xiaomi M365 / Gotrax / Hover 1 Electric Scooter Inflated Spare Tire 8 1/2 here: amzn.to/3crKlCT
The tool to get the tire off: amzn.to/3gMz4jV
Allen wrenches: amzn.to/2SaM4EH
Alternatively - put on a tubeless tire to never run flat again: amzn.to/2O7aUDQ - the video to complete that is here: • How To - Solid Tubeles...
_________________________________________________________________
Subscribe: / @andiwofford
Daily Instagram - follow me at / hermakeupandnails
Follow me on Twitter / woffoja
__________________________________________________________________
Pick up your 8.5-Inch Inner Tubes for Xiaomi M365 / Gotrax / Hover 1 Electric Scooter Inflated Spare Tire 8 1/2 here: amzn.to/3crKlCT
The tool to get the tire off: amzn.to/3gMz4jV
Alternatively - put on a tubeless tire to never run flat again: amzn.to/2O7aUDQ
I used coconut oil lubrication and I didn’t even need a tool to get the tire and inner tube back on !! Thanks again
Thank you so much . I don’t think I would’ve been able to do this without your video!!!
Excellent job and did it better than any man that I saw.
I just caught a flat last night on my way to work. Ty for the tutorial. Now I can fix it! Thank you you’re a life savor!!!
You're welcome! Happy to help, good luck with the replacement
Thx for the video. I realized that with the Hover 1 Journey scooter, you have to insert the back tire and the brake altogether as you push into those grooves; that way you will be able to put those screws back on the brake assembly and the rest is easy. Again thank you. Also when changing the inner tube, I had to use a 240 mm tire iron for motorcycles. I'm not sure if anything less sturdy will do the job at pulling that inner tube, at least on my Journey. To put it back on, you can use your suggested plastic tool. Awsome help from all of you!!
Thank you I have a Kukrin scooter, was looking scared when it was the back tire, looks complicated, but you show it's not, thank you.😊
I love to see a woman that’s is mechanically inclined, great job on the video!
thank you so much Ramsses!
Thank you so much for this. I have the same hover-1 pioneer scooter. I was so worried thinking I would have to shell out a lot of money to fix this. Thank you so much for posting a video on how to fix this.
I'm glad we were able to help Daksh!
Always love to see a woman with a mechanical aptitude. ;)
Sorry to break it to you but....
That's not a woman
@@hilmiror2906 Sorry to question you but why are you even commenting here let alone watching?
@@Auggies1956 because I couldn't get my tire on
Trick with the brakes is to clench the brake lever then tighten up the calliper. Took my back wheel off yesterday. It was like that door in the hateful eight. I’ve ordered 2 inner tubes and tyres and a mud guard for the back then I’m all set. Great video. Made it look easy.
Thanks for the trick!
Hey, I've got those tools. Didn't realize it was that easy. Thanks for that explanation.
Omg thank you been looking for this video lol my back wheel been off for 3 months now I can finally see how to put it on😩💪
Yay! Glad to hear it could help!
Danggg they really make u work to change out a flat.
Yes they do!
Best video yet
Right! Im honestly just happy I came across this video. Definitely something we should all learn how to do.
It's ridiculous how difficult it is to get the tire off
Was able to do ti without the tool but the soap was a huge help! Hadn't thought of that.
Glad to hear it!
👏👏👏 I respect how the video was made. Very good. But quick question. Can I patch the tube or is that a waste?
You can patch the tube, but they're honestly so cheap I didn't want to risk having to go through all that work again to replace it.
It's so much work involved with all electric scooters. My Currie 1000w scooter you have to remove motor and all. At least we get to watch the cutest girl in the world 😍❤️
This was very helpful thank you! So I have a 12inch tire on my Ebike/Escooter does that mean i just get a 12" tube for it? Or does the tube need to be smaller than the tire?
Thanks for the video, im having to replace my back wheel since it keeps deflating and the wheel i got is an airless one
Which airless wheel did you get?
Great tutorial, easy to follow. Superb production quality
Spent about 4 hours trying to replace the innertube on the M365 and I've had enough, getting the tyre back on is an absolute nightmare. I melted 1 tyre in the microwave following some advice on another video and the old tyre in a pan of boiling water didn't help. Think I'll take it to a shop 😂
I'm really sorry to hear that Cogan - good luck at the shop!
My hands are almost bleeding, but thank you for the video :)
Sorry you had some trouble - but glad you were able to find this useful!
I feel your pain, my knuckles are shredded.
Thanks this helped so much!
I saved me 40$ of labor thank you
You're welcome! Glad I could help!
The link to the tool shows a completely different set of plastic pry spoons. Do you have the correct link for the yellow one? Thanks
I'd love to know the exact tool too! Thanks for a great video in any case
My apologies. The black and yellow tool I was using came free with a tube I bought like 20 years ago. I've not seen the exact tool again, BUT - there are better tools. These amzn.to/3iQe2AQ hook on to the spoke in a bike tire (not needed here) but are virtually the same thing with the tiny lip and handle,. They are roughly the same size as well. And. . . you get four of them instead of one.
Thank you.nce video and I can understand it
Hi thank you for posting this video . I have a question I have two flat tires front and back . If I purchase the tubeless tires which ones should I purchase . The link doesn’t work anymore. Do I need to pump up the tubeless tires . My husband and older son are rough on these scooters so I thought tubeless might be the way to go for me. Thank you in advance.
I think I will try green slime first. Thanks for the video.
Did you loosen a bolt on the break caliper?
Mine seems to be too thick to get out between the disk and the rim
Helpful video. Thanks
You're welcome!
These tires were a pain in my fucking ass. I learned a lesson in life and to check out reviews about replacing parts on all scooters, cars etc in the future.
Could you please make a video or give some details on how to replace the tube for the rear tire on mi 4 lite 2nd gen . I find it very difficult to disassemble the rear tire
Unfortunately I don't have one of those to be able to make a video. My apologies.
Great video thank you !
Thank you LOTS for a tutorial on this specific scooter! Really needed it!
You're welcome!
Cool thanks
This video was great! I actually ordered a gotrax g4, and it has airfilled tires. I was looking to see if there were 10 inch tubeless tires but couldn't find any yet. Any advice? Thank you!
I was able to follow on per well until it came time to take the tire off the rim. I have the little tool but I’ve been struggling to pop the tire off for line 30 minutes
Did you ever get it Charles? It takes one left in position to hold an edge off, and another one to run around the rest of the lip of the tire to get it off. I did it again in a front tire video I posted here if you'd like to see more instruction on it. It's at 01:26 in the following video: ua-cam.com/video/dzsgjCj397c/v-deo.html
Andi Wofford I did finally! I ended up wedging a screwdriver in there as well to hold the tire off the lip. Thanks!
So glad you were able to get it!
Andi u Rock👊
Andi the only really hard part i ran into was the DANGGGG screws on the brake calipers it stripped baddddd got the idea to use my Robo Grip that worked like a butter!!!🤣 Factory set each and every screw with loctite Ohhh Man but everythings back in one workn piece thanks again for ur 📹 🙌
Out of curiosity, what psi do you inflate to?
1st we are going to have to set the scooter on a steady surface. *drops scooter*
Is it possible to use a hard rear tire on Hover 1? 2nd flat in 3 months from hit a bump that pinched the tube. Tubes are actually a bit to large and inflate with a kinck in them.
Yes it is - I made a video on that here: ua-cam.com/video/qRAwvoyP9WY/v-deo.html
Question? I have the Hover 1 alpha and it has the cable going into the rear wheel for the motor. Do i have to unhook to take the tube out?
On the one I did, the motor was in the front wheel. I did not unhook it, I built a holder so I wouldn't mess up the cable when trying to take the tire off and put the new one on. There's a video I made on it, but it's the front tire. Might help 🤷🏼♀️
@@AndiWofford found it, thank you.
You're welcome Maurice!
❤️ shukrana 'iinani aistafadt kathir
This guy is handy with that scooter good job
Can you tell me what specific model this is? I had the hover 1 dynamo, and could not find a video on how to change the tires. They are made completely different. I ended up just returning it. Now I want to buy a new one but one that I can actually find a tutorial for. All reviews say these tires pop easily and recommend soild tries.
Hi - this model can be found here: amzn.to/32Ts6Ec
Are you able to do the front tire video?
Done, please find the video here ua-cam.com/video/dzsgjCj397c/v-deo.html
Awesome!
Question: do you know what those 8 screws on the one side of the front wheel are for? I took them off and nothing happens
They are most likely plastic covers (4 on each side?) For the wheel nuts
@@AndiWofford not those, the one side of the front wheel has like 8 screws on it, visible in your video here. They go all around the wheel (one side only, round pattern)
Hi, I don’t see the link for getting the tube or the cool tool to get the tire off easily.
Hello!
Pick up your 8.5-Inch Inner Tubes for Xiaomi M365 / Gotrax / Hover 1 Electric Scooter Inflated Spare Tire 8 1/2 here: amzn.to/3crKlCT
The tool to get the tire off: amzn.to/3gMz4jV
Alternatively - put on a tubeless tire to never run flat again: amzn.to/2O7aUDQ
Is there a different method for the front tire.
Yes there is, and I made a video on it: ua-cam.com/video/dzsgjCj397c/v-deo.html
When I get the front wheel off can I patch the hole in the inner tube.
@@erichughes7382 You could, if the hole is small enough but the tubes are like $5 each if you order. So if it were me and I were going through all this, I'd just get a new one and be done with it. amzn.to/3crKlCT
A flattish spoon works well to seat the bead.
Hilarious 😂 !!! Entertaining for sure 👌
Good job
Thank you!
can i purchase the 8.5 inner tube for my fluidfree horizon scooter?
According to their website, the 2020 Horizon model has a solid 8" rear tire and a pneumatic (air filled) front tire that is 8.5 inches. So yes, you can buy the inner tube to replace the front tire.
Andi Wofford thank you!!! love your video, very informative and will definitely reference when i change out the inner tube on my tire.
hi i was told to put the tyre in bucket of hot water for about an hour to soften the tyre.
any tips for one of the brake screws not coming out
That's strange Justin. Haven't had that issue. Have you stripped the head on it or did you break the head off? Otherwise it's a question about more leverage.
I think i got a flat i my tires but im not sure the weather is getting cold so it could be that. I blown them up the other day and they slowly went down. Im going to try to replace them lol i know nothing about this stuff i seen that you didn't have to replace the outside of the tire does that need to be replaced or is it just a shell to protect the tube lol i know nothing?
do you know a place where i could get it fixed?
Perhaps a bicycle repair shop, but other than that I'm not familiar with any places that will actually do this
@@AndiWofford thanks a lot !
You're welcome!
Probably the hardest inner tube change I've ever had to do
I wish it were easier!
I have 10" wheels and I when I try to inflate the air the tyre is uneven. How to fix this? The tyre and tube is brand New. Tried multiple times and adjusting the tyre but it gets bigger on one end and smaller on the other end of the tyre. Like there is not coming Even pressure all around the circle. Rims are fine.
Have you checked to see if the tube is pinched inside the tyre? Otherwise, I would pull the tube out to see if it inflates evenly and go from there
Where can I find the Allen wrenches i need
Allen wrenches in case you don't have any: amzn.to/2UNBTHq
Andi Wofford, is it going to work for my “hover-1 journey”?
@@demondtv9775 According to the specifications, yes you can use the tires I link to: "8. 5 inch tires with a
300 W motor reaches speeds up to 14 mph - weight capacity of 220 lbs to ensure safe riding. 8. 5 inch tires allow for greater stability. Foldable design - convenient, stylish and exciting form of transportation."
Andi help. Hello. I don't seem to be able to put the brake back on. The tire is properly set in the grooves all the way in but the brake does not go in as easily as you show in the video. What am I doing wrong?
I've done the hard work but I've bought a basic hand pump for the front wheel and as soon as I remove the thread, the tyre deflates. And tips?
Just did some googling - this is all I could come up with: "I'd have a look at the valves. It sounds like they are stuck in the "open" position. Perhaps the pump is pushing them too far down, or there may be some dirt in there. Or maybe you just have bad inner tires.
Try to get in there with some pointy pliers and see if you can pull it up. Normally it should return to the normal level (almost flush with the outer ring) by itself."
That was from a bike forum - good luck!
I lost that slot where the tire goes into. Do u happen to know where I can buy another one
Hi Eddie. What slot are you talking about that the tire goes into?
Andi Wofford 4:08 this silver slots but never mind I found it
@@eddie7579 My apologies. I'm glad you were able to locate them. I see what you're taking about now though.
Hi and I need to know how to change back tyre tube of hover 1 dynamo can I get some help pls
Would they tires for a Xiaomi M365 be the same as well? Thanks in advance!
Hi Robert - everything I've seen says that yes, the Xiaomi M365 has 8.5 inch tires: Specifications
Model:M365
Weight:Approx. 12.5kg
Frame:Aerospace-grade aluminum
Tire size:8.5 inches
Motor size:6.7 inches
Colors:White, Black
hello what is the right presure of air for this tire?
From what I've read it depends on the inner tube. But 50 PSI seems to be a pretty common pressure for these.
Andi Wofford what is the conver of 50 psi is it 2.5?
Please don't use an air compressor to fill the tubes. The chance of you bursting it are extremely high.
If you do "jumps" on your scooter like I do... (Bunny Hops I guess)
Do NOT inflate it to 50PSI! 40 or 45 is more than sufficient.
Thank you for the advice.
Do we have to replace the tube completely or could we just patch the hole?
You can patch. I've done it before
There’s no way you got the other side of that tire on so easily. Mine has defeated me
I've done it a couple of times now. I'm sorry yours is giving you so much trouble.
Your link for the tubeless tire does not work and the wrench link leads to more of the plastic levers
That's weird. I clicked on the link just now and it took me to the same tires?
I took the tire off without taking the brake calipers off.
Great job.
Thanks Kay Jay! Got one more coming on a solid scooter tire 😁
Andi Wofford - I'm glad to know that because if I get one more flat on my Hover, I'll be looking to change out to a solid tire. The only problem is, from what I hear, installation is a KILLER!
@@TheKaybjay2 I feel you on this so much! I had two flats and have finally had it with tubes. It's not as hard as you may think - to be honest. Use some zip ties and a crowbar after boiling the tire. Or wait for the video, I'll walk you through it 😊
@@AndiWofford - Cool. And that tire will fit the Hover wheel?
@@TheKaybjay2 That's correct! The 8.5 inch rubber tire
My scooter has a flat tire. Can you suggest me where i can go to fix it please. My location - jersey city, NJ
How is it that no one shows the removal of the powered wheel?
I do in my other video: ua-cam.com/video/dzsgjCj397c/v-deo.html
Whats the name of the tool you are taking the tyre off with
Hi Stuart - They're called tyre levers and can be found here: amzn.to/3gMz4jV
2:11 How did you remove the valve nut ?
With a very tiny pair of needle nose that I have.
so um my tire wont fit on the scooter any tips
Is it an 8.5 inch tire?
@@AndiWofford yes it is
Solid tire or tube tire?
@@AndiWofford solid tire
Are you heating it up enough? It needs to sit in boiling water for at least 15 minutes. Then it should be malleable enough to follow the video instructions with the zip ties and some sort of tire spoons
What type of screw driver do you need?
I would use these to get the tire off: amzn.to/3iQe2AQ
HELP! I have unscrewed the break assembly but try as I may I cannot get the break assemply to clear the rim of the tire. What am I doing wrong?
I had to twist the tire a bit and wiggle it to get it into the brake calipers. Should fit in
@@AndiWofford Andi, thanks. I'm trying to removed the tire, not put it back on. I wish I could send you a picture. Its seems to be the big black circular "thing" on the inside of the break that won't clear the rim of the tire. Of course the break itself won't clear the silver disc itself either. I've undone more bolts that you show in the video and I'm worried about taking any more off.. On my FB page I've asked for recommendations of a place to take it to but without any luck. ;
2:47 at this moment i rather install the solid tires, all u need to do is to heat the tire eather in the microwive for 3 minutes or put it on boiling water enough so the tire gets more flexible, ( remember to wear gloves or youll burn the shit out of you ), after the heating process is done just rub both the rim and the tore with something like oil ( i used on mine oil like kinda it was the ones used for cars engine ) then go and mount that tire youll need to apply alot of presure on it towards the rim but trust me i did it myself on my hover 1 pioneer and changed both the front and rear tires
Isn’t this scooter pretty similar to the E-Wheels E2S V2?
I changed the rear tire tube on my electric scooter, now it won't go, and the brake light flashes when I hold in the brake lever. Anyone know what's going on here? Thanks in advance.
What should u do if the scooter wobbles from the front
Make sure the nuts are tight and the alignment is correct on the front tire
take out the pin air valve first before unmounting the tire
There's no way there is any 5/32" Allen bolt of any kind on any xioami scooter. Everything is metric.
You're absolutely correct. For the Xiaomi 365, the four bolts for the Rear Wheel Cap Screws are 2.5mm allen wrench heads and the bolt heads for the Rear Wheel Mounting Bolts are 4mm allen wrench heads.
@@AndiWofford well done. Swift and accurate
Can't get tire back on.. it seems way to0 tight. I used spoons, flathead screwdrivers, and myh friend bike repair tool.. we almost broke the tool. AM i doing something wrong, I don't see any struggle in the video putting the tire back on..
I didn't really have any problems. Have you used soapy water or some kind of lubricant? That typically helps
Will a flat tire keep my scooter from going foward ?
Potentially, yes
@@AndiWofford okay thanks for responding
Good video, but the tire is fixed with the wrong tread direction..
What size is the tire? Not the tube
8.5 inch tire. Is that what you're asking?
@@AndiWofford yes thanks
removing the brake is an extra step , the wheel will pull off without removing the brake assembly.
Sorry but no.... getting the 2nd side of the tire on is not "more difficult" its a f...ing nightmare. The tool does not help any other suggestions?
Make sure that you’re using a lubricant to help get it over the rim. That should help it slip right on, and using a tool should help coerce it on there. I’m sorry it’s challenging Patty.
Could show better picture of tool...
Is that a guy?
Whats the point in having a video if you don’t show all the steps being completed?
bro i just sawed the tire off and got a new tire that doesnt go flat and im fine lol
I got a flat on my e scooter, im selling it, too much hassle
Lol it doesn't have standard bolts it has metric ... but hey if it works it works.
The male voice with the female body in the video is confusing my brain.
Word of advise girl talk slow and present slow. You went way to fast and certainly did not explain in detail what you need to do if you could please message me and I am more than happy to explain.................