Very helpful video, it helped me install the same unit so thanks. I did the water feed differently - rather than blank off the hot inlet at the bottom of the cistern it's better to split the cold water pipe and feed both inlets. This way you a) don't effectively get a dead leg of pipework with potential for stagnant water or bacteria to develop, not healthy and b) you get even water pressure wherever the mixer tap is set between hot\cold limits. I also found using 500mm flexis on their own were long enough to connect in the cistern without needing to use two lengths of joined flexi pipe. It's tight fitting the sink but it can be done.
Hi.im glad that you found my video helpful and I think connecting bought conections with could water it's great and make sense.For the flexible I went crazy to find one long enough but non of the shops had it available.I wanted to be longer gist for maintenance purposes easier to take out the top side and check what it's happening in the cistern (soap hair etc.)
I was just curious about a few things with toilets like this because I MIGHT be having one put in to my wet room. As I have ocd and can't use small toilet room, as I have OCD. U was just wondering even if for my own reassurance, it is clean watet that you wash your hands with right? In my head I was getting a little worried in case it was like washing your hands with toilet water, the sink part has nothing to do with the toilet part yeah? Other than bein connected to save space. Didn't know how else to ask this question without sounding stupid, sorry. But I just wanted reassurance that it's definitely clean as it would be with a normal separate sink...
Is the cistern connected directly to the mains or water goes into the cistern only through the tap? I Mean. before I flush I must fill the cistern with the water from the tap first
I couldn’t tell why you didn’t put it fully back against the wall? (you needed to do put in wooden packing). Also how you going to address that issue as water will be getting regularly splashed on it & u can’t really clean that. Next question is where are you going to put the bottle of soap? 😬😝
Hi. The soil pipe was on my right side quite far from the back wall when installing the pan conector wasn't space for it. It was a very small space to put it in without squeezing in it. That's way I installed a flexible pan conector and the toilet away from the wall. If you ask someone to install a toilet, what in this world has to do with the cleaning and with the soap???
Where do you get a toilet tank sink combo? All the big box stores seem to be out of stock. Can't even order them. Other than Amazon, I can't order one! But the big box stores have retrofit Bidets in stock, but not these! I am near Joliet/New Lenox, IL USA.
Hi ..the flush valve has a red bit with different positions on it ...should you keep the same position or change it..Do these change the flow of the water..
@@How2Extreme what position do you use that increases the amount of water in the cistern ?I feel there's enough water for the flush . I am having to flush about 3 times ..would appreciate your reply.
Great!! Quick question- some people would do gargle whlie brushing teeth in the sink and there's always some water in the toilet after flushing. That leftover flushed water might stink. How to avoid this situation? And people like me use more water in sink, in a day, that reservoir of toilet isn't spacious enough to consume that amount of water. Then where that extra amount of water should go (i don't want to waste it either)? Thanks in advance ☺
@@How2Extreme hey thank you, but their all for a standard toilet. It a combi (2 in one with the sink) the combi one has an outlet inside the tank to connect the cold water sink tap too.
Careful when you buy it because you might need to buy 2 some they will come just with one connection that you can use at the bottom or at the top. You might need to modify it a little bit to
hi.my personal opinion is that is going to be some residue building up doing the year's but you can remove the sink and give it a good clean with bleach and some clean water evrey 6 - 12 months
hi. i gist used a blank nut with a rubber washer. www.screwfix.com/p/bsp-blank-nut-x/39553?tc=KB9&ds_kid=92700055281954514&ds_rl=1249404&gclid=Cj0KCQiAvvKBBhCXARIsACTePW8yLqwiA54Im6T0ymlUAmRUERwHFpF344WPQ0FEstdAbRHPXm01D_kaAtJcEALw_wcB&gclsrc=aw.ds
Personally, I would have thrown the basin plug away as the basin does not have an overflow. You don't need to fill the basin with water to wash your hands and kids will be kids and leave the tap running then you will have one big flood in the toilet and that would not be good. Also, I would have linked the cold to the hot so that the tap would work either way.
@@derekgoodwin6646 you just need to connect one and the tap is going to be connected from inside the cistern all the connections are going to be in the package
For me it is one of the great inventions of the last decade in Mexico this technology has not yet arrived and Latin America to educate take value from water
Hi. What exactly do you mean I didn't install any hot water pipe. The hot water suppy was too far from this toilet and the client decided not to install the hot feed.
yes I've done that a few time's because the toilet seat is going to touch and not stay opened in some chases but it whent well on this one.thanks for the msg
Very helpful video, it helped me install the same unit so thanks.
I did the water feed differently - rather than blank off the hot inlet at the bottom of the cistern it's better to split the cold water pipe and feed both inlets. This way you a) don't effectively get a dead leg of pipework with potential for stagnant water or bacteria to develop, not healthy and b) you get even water pressure wherever the mixer tap is set between hot\cold limits.
I also found using 500mm flexis on their own were long enough to connect in the cistern without needing to use two lengths of joined flexi pipe. It's tight fitting the sink but it can be done.
Hi.im glad that you found my video helpful and I think connecting bought conections with could water it's great and make sense.For the flexible I went crazy to find one long enough but non of the shops had it available.I wanted to be longer gist for maintenance purposes easier to take out the top side and check what it's happening in the cistern (soap hair etc.)
Hi - is there a connector that does that please? I am a complete novice and don't know what I am looking for. Many thanks
Please give me more details what conector do you need.you ca use Facebook for better comunication
Amazing job thank you is there is anything like that for rv ?
Probably, this will work, depending on the space available
@@How2Extreme thank you for reply there is available space but in RV trailer the drainer in the floor not in wall as this one.
@imhere4765 with a flexible pan connector can work
I was just curious about a few things with toilets like this because I MIGHT be having one put in to my wet room. As I have ocd and can't use small toilet room, as I have OCD. U was just wondering even if for my own reassurance, it is clean watet that you wash your hands with right? In my head I was getting a little worried in case it was like washing your hands with toilet water, the sink part has nothing to do with the toilet part yeah? Other than bein connected to save space. Didn't know how else to ask this question without sounding stupid, sorry. But I just wanted reassurance that it's definitely clean as it would be with a normal separate sink...
No qustion is stupid and yes you will jet clean water as is conected separatley. you can see the conections in the clip any way. Chears
@@How2Extreme thanks mate. Just needed to know
@nickkoosh_8077 🍻
Is the cistern connected directly to the mains or water goes into the cistern only through the tap? I Mean. before I flush I must fill the cistern with the water from the tap first
Hi.the tap and the cistern work individually
I like that. Good use of water
Yes.nothing is going to waist
I couldn’t tell why you didn’t put it fully back against the wall? (you needed to do put in wooden packing).
Also how you going to address that issue as water will be getting regularly splashed on it & u can’t really clean that.
Next question is where are you going to put the bottle of soap? 😬😝
Hi. The soil pipe was on my right side quite far from the back wall when installing the pan conector wasn't space for it. It was a very small space to put it in without squeezing in it. That's way I installed a flexible pan conector and the toilet away from the wall. If you ask someone to install a toilet, what in this world has to do with the cleaning and with the soap???
Brilliant video 👏 very helpful 👍
Thank you
Where do you get a toilet tank sink combo? All the big box stores seem to be out of stock. Can't even order them. Other than Amazon, I can't order one! But the big box stores have retrofit Bidets in stock, but not these! I am near Joliet/New Lenox, IL USA.
Hi. It's going to be were hard to find one in US im in UK i had this conversation with somone in US and they didn't found one
Hi, where can I buy the spare parts? I need bottom entry fill valve but for sell are all without tap connector!! Thanks
Hi. The only place that i have in mind is eBay. It's quite difficult to find spare parts for this type of toilet
@@How2Extreme thank you!
You welcome hopefully your going to find it
Customer has an interesting choice of toilet
Ha ha ha
Hi ..the flush valve has a red bit with different positions on it ...should you keep the same position or change it..Do these change the flow of the water..
No the flow rate should be the same what you can change is the quantity of water in the cistern
@@How2Extreme what position do you use that increases the amount of water in the cistern ?I feel there's enough water for the flush . I am having to flush about 3 times ..would appreciate your reply.
You jus have to increase the quantity of water from the flash valve there is a red or gray lever on it
Very helpful video thank you for sharing
you welcome
Did you ever think of reversing the door, so it swings outside the bathroom?
Hi.not really im not going around people houses and modify there home's 😂😂😂
Hi, do you need an overflow pipe for this type of toilet combo?
No you don't need that on any new toilet
Great!!
Quick question-
some people would do gargle whlie brushing teeth in the sink and there's always some water in the toilet after flushing. That leftover flushed water might stink.
How to avoid this situation?
And people like me use more water in sink, in a day, that reservoir of toilet isn't spacious enough to consume that amount of water. Then where that extra amount of water should go (i don't want to waste it either)?
Thanks in advance ☺
The water it's gist going out and no it will not stink. try to spit in the toilet
@@How2Extreme can I please have your personal contact details, I have couple of questions?
You can find my Facebook in the description
@@How2Extreme please check your Facebook, sent message there.
Thank you for the excellent video. I hope you get to visit us in the States soon.
that will be nice. i will love to visit the states
@@How2Extreme never seen that before on a toilet cistern we are in the uk
You can easily find them in the uk
Hi,
Do you have the part number for the fill valve.
I need a replacement for the cold feed fill valve assemble
Hard to find a combination version
Hi. You can probably buy a universal one from selco or screwfix
@@How2Extreme hey thank you, but their all for a standard toilet. It a combi (2 in one with the sink) the combi one has an outlet inside the tank to connect the cold water sink tap too.
Check this out! amzn.eu/d/hFDfJhJ
www.screwfix.com/p/viva-bottom-or-side-entry-universal-4-in-1-fill-valve-1-2-or-3-8-/2839H?tc=KB9&ds_rl=1249404&gclid=Cj0KCQjww4-hBhCtARIsAC9gR3ZdnvfShZeVdVH6Slig4Z7fdtKrj-8dnnNLWZnZFi-_F8fUHpI5EuEaAsbtEALw_wcB&gclsrc=aw.ds
Careful when you buy it because you might need to buy 2 some they will come just with one connection that you can use at the bottom or at the top. You might need to modify it a little bit to
Hi! Will the soapy grey water have any effect on the inner parts of the tank?
hi.my personal opinion is that is going to be some residue building up doing the year's but you can remove the sink and give it a good clean with bleach and some clean water evrey 6 - 12 months
Flush the toilet after you wash your hands
That will definitely give it a longer life
Hi, what do you use to plug the hot water hole please?
hi. i gist used a blank nut with a rubber washer.
www.screwfix.com/p/bsp-blank-nut-x/39553?tc=KB9&ds_kid=92700055281954514&ds_rl=1249404&gclid=Cj0KCQiAvvKBBhCXARIsACTePW8yLqwiA54Im6T0ymlUAmRUERwHFpF344WPQ0FEstdAbRHPXm01D_kaAtJcEALw_wcB&gclsrc=aw.ds
Fab thanks
@@jackphillips3973 you welcome
Nic I want to buy this from where
www.google.com/search?q=toilet+combo&rlz=1C1CHBF_en-GBGB924GB924&sxsrf=ALeKk01mJ0EO8vuVwcHhs6FXDhzJiAqnIA:1608471090333&source=lnms&tbm=shop&sa=X&ved=2ahUKEwjCzOHf1dztAhVVUBUIHeoNDKsQ_AUoAXoECAUQAw&biw=2752&bih=1042
Personally, I would have thrown the basin plug away as the basin does not have an overflow. You don't need to fill the basin with water to wash your hands and kids will be kids and leave the tap running then you will have one big flood in the toilet and that would not be good. Also, I would have linked the cold to the hot so that the tap would work either way.
Good to o know.thanks
Do you know how a toilet works? Once it gets filled a certain amount it will just flush.
So this has to water feeds how did you connect on to one pipe please
HI.One is for hot and one is for could and i just capped of one of the intakes
@@How2Extreme so it needs cold water feeds for basin and cold water feed for cistern. From the 15mm copper how did you connect these two feeds .
@@derekgoodwin6646 you just need to connect one and the tap is going to be connected from inside the cistern all the connections are going to be in the package
ua-cam.com/video/W-ofyr194lY/v-deo.html
For me it is one of the great inventions of the last decade in Mexico this technology has not yet arrived and Latin America to educate take value from water
Hey don't tell me that my clip was seen all the way in Mexico. Wow that's awesome 👌
Where did the hot water supply come from.
Hi. What exactly do you mean I didn't install any hot water pipe. The hot water suppy was too far from this toilet and the client decided not to install the hot feed.
The water supply line/hose will corrode over time from sitting in the water.
Probably yes but this is how they designed
Multikwik a bit suspect...why not 90°
@@lucadinihobaker3502 the toilette should be positioned further away from the wall to fit a 90° pan connector
Push button can screwed off and placed inside system
yes I've done that a few time's because the toilet seat is going to touch and not stay opened in some chases but it whent well on this one.thanks for the msg
Japan combined this several decades ago
Not the best invention but perfect for small places
After 6 moths rust from cold and hot water pipes will discolour the unit!!!!
You can change the flexi with a plastic one
I don’t like the plastic corrugated type pipe. I just picture in my head the poop getting stuck in the grooves…ewwww 🤮
Yes i don't like them either but in some cases they do the job better. Sorry for the late response but your message went in the spam for some reason
Probably defined as spam because of the p.o.o.p. in the pipe
Probably 🤣🤣🤣
What are dimensions of that bathroom? What is brand/make of toilet-sink combo?
@baussie8128 The title is the actual name of the toilette