I had a Browning 1885 Hight Wall in 30-06 caliber. I actually wanted to have it converted to 7x57mm. But because of the octagonal barrel I abandoned that idea... It was a very good gun.
I love the fact that you're using traditional sights. I've seen too many people on UA-cam take a beautiful 1885 and put a scope on it regardless of the caliber I just think that this rifle is meant to be shot with sights. Thank you
Agree! My eyes are not what they used to be, but I will stick with iron sights on most of my rifles as long as I can. Exceptions are rifles like my 6.5 Creed Moor which does have a scope.
That's a beautiful rifle. I've seen new Model 94 on GB with the same furniture and color case metal, with 24" half-octagon barrel in .38-55. The cartridge is a medium bore thumper, putting out some heavy slugs for caliber, and doesn't beat the shooter up as much as heavy .45-70 loads I imagine.
I've got the Browning version of the same rifle. 28" Satin octagon barrel, MVA Long Range Soule with a spirit level front globe sight. 38-55 also, mine loves the Accurate Molds 38-340D sized .378" going about 1450fps. Starline brass with h4895.
I have the same gun. If yours is like mine it came from the factory with a set trigger. Was a surprise to me. Try pushing our trigger forward and see if it clicks, while the hammer is cock for shooting of course. I did not buy/order mine that way. Like I said it was a surprise. Pleasant too. It’s a damn fine hair trigger. Breath wrong and you send one some where you never knew a bullet could go..
@@mountainhunter3340 Very nice I think that bullet should be fine. I know the standard 255 grain Barnes works really well for deer or even elk or black bear from what I've heard. Thank you
@@SagebrushLongshots Nice. I've heard the guys say that the standard 255 grain Barnes bullet works really well for deer black bear elk inside of 150 . I think a lot of people underestimate the 3855 I think back in the day it took a lot of game Even with black powder. Thank you 👍
I have acquired an early model 1894 saddle ring carbine with a shotgun butt. 38-55. It slugs at .379. Can I use pure lead with black powder? I used an original 1894 Winchester mold and it cast 240 grain bullets with Lyman number 2. The mold is stamped 38-255. Is it the alloy that makes them lighter? I have only ever cast pure lead before for muzzle loaders so I don't know. But I only use black powder so I was wondering if you know.
@@billy56081 Thank you. I have five pounds of Lyman number 2 that I can use. Do you mind if I ask you another question? Do you know where I can get a .377 0r .378 bullet mold? Thanks for taking the time to help me.
Sizing is affected by the alloy. Pure lead drops smaller, alloys typically fatter and lighter. Once you've determined what your rifle likes - typically ~.001" over what the bore slugs - buy a sizer for the rifle. Pure lead with a quality lube may work at black powder velocities.
@@SagebrushLongshots Thank you. In the 1895 Winchester catalog they advertised a cartridge that had a shorter case with pure lead bullets for target shooting but the full sized cartridge used an alloy, though they were both black powder. I'll stick with alloy and Goex BP. Thanks for the information, I'm out of my depth with alloys. I never cast with it before. I like your rifle. Great video.
We're guests from all over the USA at the U-Pick. The Captain's family allows us to gather for an annual memorial celebration for our late Brother who brought us all together.
@@SagebrushLongshots I really enjoyed the videos Wynn posted. Especially the video from 6 years ago about the 74’ Shiloh. I honestly owe it to him that helped me get started into these rifles. I have a 50-90 from Pedersoli and a 50-140 coming from C. Sharps.
I had a Browning 1885 Hight Wall in 30-06 caliber. I actually wanted to have it converted to 7x57mm. But because of the octagonal barrel I abandoned that idea... It was a very good gun.
I love the fact that you're using traditional sights. I've seen too many people on UA-cam take a beautiful 1885 and put a scope on it regardless of the caliber I just think that this rifle is meant to be shot with sights. Thank you
Agree! My eyes are not what they used to be, but I will stick with iron sights on most of my rifles as long as I can. Exceptions are rifles like my 6.5 Creed Moor which does have a scope.
@@mountainhunter3340 👍
Thanks for sharing. I'm an old Gunner's mate and enjoyed your work.
What a fantastic rifle and fun group of men. I hope that I am this lucky in my future years. Keep it up. I love the content and what a neat cartridge!
I'm loving these videos. Great job, great video.
Thank you. More to come. Doing the easy ones first. The others will take some time to put together. Aiming to get one out every week if possible.
That's a beautiful rifle. I've seen new Model 94 on GB with the same furniture and color case metal, with 24" half-octagon barrel in .38-55. The cartridge is a medium bore thumper, putting out some heavy slugs for caliber, and doesn't beat the shooter up as much as heavy .45-70 loads I imagine.
Great shooting Scoundrel!
I've got the Browning version of the same rifle. 28" Satin octagon barrel, MVA Long Range Soule with a spirit level front globe sight. 38-55 also, mine loves the Accurate Molds 38-340D sized .378" going about 1450fps. Starline brass with h4895.
You have a very elegant rifle, it is beautiful.
Id love to see you guys bring a Ruger No.1 to the videos!
Wonderful content
It would be interesting comparison.
I have the same gun. If yours is like mine it came from the factory with a set trigger. Was a surprise to me. Try pushing our trigger forward and see if it clicks, while the hammer is cock for shooting of course. I did not buy/order mine that way. Like I said it was a surprise. Pleasant too. It’s a damn fine hair trigger. Breath wrong and you send one some where you never knew a bullet could go..
Well done
Beautiful rifle, I have one of those in 45-70.
Seems you twist works for the bullet length and weight..?
Beautiful rifle and great cartridge. Will you also hunt with it? Or solely for fun Target and plinking? Thank you 👍
He did say he was working up a hunting load as well.
Yes. I have a 240 gn Laser Cast Bullet over IMR 4198 that looks promising. More range time this week to be sure.
@@mountainhunter3340 Very nice I think that bullet should be fine. I know the standard 255 grain Barnes works really well for deer or even elk or black bear from what I've heard. Thank you
@@SagebrushLongshots Nice. I've heard the guys say that the standard 255 grain Barnes bullet works really well for deer black bear elk inside of 150 . I think a lot of people underestimate the 3855 I think back in the day it took a lot of game Even with black powder. Thank you 👍
Nice shiner what does the other guy look like
Now you know why he is using iron sights!
I have acquired an early model 1894 saddle ring carbine with a shotgun butt. 38-55. It slugs at .379. Can I use pure lead with black powder? I used an original 1894 Winchester mold and it cast 240 grain bullets with Lyman number 2. The mold is stamped 38-255. Is it the alloy that makes them lighter? I have only ever cast pure lead before for muzzle loaders so I don't know. But I only use black powder so I was wondering if you know.
I think I'd use either 1 to 20 or 1 to 10 tin lead ratio.
@@billy56081 Thank you. I have five pounds of Lyman number 2 that I can use. Do you mind if I ask you another question? Do you know where I can get a .377 0r .378 bullet mold? Thanks for taking the time to help me.
Sizing is affected by the alloy. Pure lead drops smaller, alloys typically fatter and lighter. Once you've determined what your rifle likes - typically ~.001" over what the bore slugs - buy a sizer for the rifle. Pure lead with a quality lube may work at black powder velocities.
@@SagebrushLongshots Thank you. In the 1895 Winchester catalog they advertised a cartridge that had a shorter case with pure lead bullets for target shooting but the full sized cartridge used an alloy, though they were both black powder. I'll stick with alloy and Goex BP. Thanks for the information, I'm out of my depth with alloys. I never cast with it before. I like your rifle. Great video.
Where did the black eye come from?
I’d love to come shoot on your guys range with my 74’ big 50. Sadly I don’t where guys are.
We're guests from all over the USA at the U-Pick. The Captain's family allows us to gather for an annual memorial celebration for our late Brother who brought us all together.
@@SagebrushLongshots I really enjoyed the videos Wynn posted. Especially the video from 6 years ago about the 74’ Shiloh. I honestly owe it to him that helped me get started into these rifles. I have a 50-90 from Pedersoli and a 50-140 coming from C. Sharps.
Sitting down, gun on a stick. Is this fun for you?