Puig Clip on spoiler
Вставка
- Опубліковано 16 лис 2024
- Hello fellow riders/youtube people.
You will most likely say that I went overboard with all these screens and spoilers, but better too much than missing something.
Therefore, today puig clip-on to Puig wind screen.
Enjoy.
Hi there, I said it works with the Puig spoiler. And then I drive with the original screen in the lowest position, and it works great for me, more stable screen and less noise. And then I can drive with the visor open at 100 km/h without problems. I hope you are happy with your Puig after your trip to Europe. Great video as usual. Stay warm and stay safe..👍👍👍
Amen about your health. Mental and physical health is always a top priority!
I’m 6’1”, 34 inch inseam. Ride with an Arai XD4 w/ visor. Buffeting with the stock windscreen in any position was BRUTAL! Installed this same Puig spoiler and it is PRICELESS! Zero buffeting. With the windscreen all the way up can still see over the top just fine.
2022 Versys 1000.
Thank you posting, Andy. Just installed a Puig windshield but not sure I need the spoiler. Also, I love your jacket. :)
That looks like a very great quality piece. I know it works, my buddy has one for his. Tenere 700.
haha my fault
I'm glad it works nicely, Andy. Safe travels!
Puig is releasing the new adjustable visor 2.0 set to be available in a month or two. It's basically the same but with a slightly better design. I know you probably bought this a few months ago now, before your trip to Nordkapp so you wouldn't have known.
I will be waiting for that and buying it since I also noticed on my 3600 km trip recently that I slouch instead of sitting straight in the seat... simply because when I sit straight I can feel turbulence on the top of my helmet so that translates into wind noise in the helmet and that translates into me slouching and not having a good posture while riding.
PS: I already have installed the tallest windscreen from Puig and set to the maximum position on the bike. I am simply too tall for it 😅
I'm 5'9" tall, ride a 2019 Tiger 1200 XCA bought the aftermarket Puig touring wind screen and still have the same problem as with the OEM windscreen. I'm slouching down 2" to stop the wind buffeting.
I guess now I need to pay more money and buy the clip on spoiler😒
I should have just bought the spoiler in the first place and attached it to the original windscreen. I was trying to avoid having two black pieces of plastic in my line of sight.
Hopefully others reading this can learn from my experience, and save a little money.
@@markkulyas2418 did u ever think of going with the givi airflow?
@@markkulyas2418 i am between this kind of puig with the deflector or buying the givi airflow wich is ugly...and the puig its just so beautiful and sexy to be heonst :D
sounds like you have a quick shifter....bike sounds great and smooth up shifts...enjoy your videos from Florida
Hi, thanks, yeeeah quickshifter is not my favorite, it is not working as it should on this bike.
Really good, interesting video, thanks!
Szerokiej drogi, szczęścia w podróży.
I have 2 screens, one with the clip on, I used crazy glue to permanently set the clip on cause mine was a cheap Chinese made but same principle, the clip on worked great till last winter & I had to ride in winter fog, I constantly had to clean the clip on cause even at the lowest windshield position, I had to see through the clip on, Now I use the Puig Windshield with no clip on at medium hight & feel no downward pressure.
great video again thanks, can I ask what height you are and what size puig you went for, there seem to be 3 different lengths (220, 250 and 315 at widest point). I have the bog standard versys so the puig main screen I bought is a bit narrower than yours at the top. many thanks!
I`m 177cm in a good day, and I have puig touring screen 55.5 x 48.7cm Nr. PU3640W, you have standard Versys so you have different mount, this screen fits only model S and SE
@@MotoAndy Thanks Andy, my fault, I meant the size of the puig visor,
Hi! Great and informative video. I just bought a Versys 1000 and was thinking that I might need to exchange the stock screen. I saw in one of your earlier videos that you used the Givi D4120T on your previous Versys 1000. How was your experience riding with the Givi windscreen compared to your current setup with the PUIG one?
Givi was the best screen I ever had, it is a shame that Givi does not make screen for SE model.
"
Sławek Kowal
2 godziny temu
Szerokiej drogi, szczęścia w podróży."....podróż już się odbyła,2tygodnie zleciały w 2h:D
it seems to me it all depends how you tune it, if it is perfectly tuned it must work, however if it is poorly positioned it can do more harm than good
Looking thru it all the time I think is going to be my problem or at least a challenge at first.
PS. I have neck trouble too, 2 collapsed discs. Hope it improves. Cheers Scott
I know it will sound pathetic, but welcome to the broken neck club😉 I know your struggle my friend, I hope Clip-op will work for you. Cheers
@@MotoAndy Not at all, thanks!
@@MotoAndy Is Puig the brand you would recommend? I have a new 660 Tiger Sport, the first bike I've owned with a significant, adjustable screen.
@@scottbailey5644 There aren't many to choose from on the market, but this is my third Puig and none of them have broken, and each one had very good adjustment, which is quite important.
@@MotoAndy Thanks!
Bonjour,
Es ce que cela permet de ne plus avoir de bruit et de turbulences ?
Je n'ai eu aucune turbulence après le montage du clip-on
Witaj, co to za uchwyt na telefon, możesz podać jakąś nazwę lub link? Dzięki
@@tomasz816 ua-cam.com/video/4JS2isD7xII/v-deo.htmlsi=NN3hNfTLRtRbZtFc
Hello Andy! The clip-on doen't scratch the original windscreen? Just curious about it. If you put it on and off many times...
No scratches on my windscreen from clip-on🙂
Also question, how is your gopro remote fixed to the brake reservoir? I didnt see any type of support for it. Thanks!
nevermind, its strapped with the gopro strap that comes with the remote silly me... 😂
@@sunnycloudy1337 yes exactly, velcro wrist strap 🙂
Nice video again 😎👍
Hello Andy could you give me the reference of this puig deflector for my versys 1000 2019 thank you in advance
6319-(214) but you can check it on the puig website puig.tv/en
@@MotoAndy tanks you
I have one. It rattles, and cannot be tightened. So I put it in t spare parts bin.
are the clips that go on the windshield made of metal or plastic?
Plastic
jók a videók csak egy lényeges infót hiányolok! A magasságodat.
176cm és rövid lábak
Si puo' inclinare l'appendiei del cupolino