HOW TO INSTALL SLIPPER CLUTCH IN BIKE TVS APACHE SLIPPER VS REGULAR CLUTCH, SLIPPER CLUTCH EXPLAINED
Вставка
- Опубліковано 5 лют 2025
- Can we install/fit slipper clutch on motorcycle with regular clutch like the TVS Apache RTR 200 Version 1 ? SLIPPER CLUTCH Apache 200 ?
The new TVS Apache RTR 200 Race edition has slipper clutch (ART).
CLUTCH ADJUSTMENT VIDEO: • TVS APACHE RTR 200 CLU...
TOOL KIT USED:
STANLEY STMT72795-8 1/2" Drive Metric inch Socket Set: amzn.to/2PzQ9Qt
STANLEY STMT72794-8-12 1/4" Drive Metric Socket Set: amzn.to/2P0Grpd
Nylon hammer/mallet: amzn.to/2PygNcB
SLIPPER CLUTCH VS NORMAL CLUTCH :
Here we have installed the slipper clutch on the TVS Apache RTR 200 4V version 1 which had regular clutch. In this video we have explained in detailed about slipper clutch installation on the TVS Apache 200. This is a detailed video with step by step guide/tutorial on changing the clutch on motorcycle. The video includes clutch changing tutorial right from the engine oil change, oil filter, oil cooler, clutch cable removal, clutch casing, sping, dowel pin, clutch adopter pin, steel ball, clutch nut, thrust washer, clutch spring, clutch plates, pressure plates, clutch shaft, Clutch casing gasket etc.
After fixing the clutch the video shows slipper clutch demo on the TVS Apache RTR 200. Right now very few motorcycles in India have slipper clutch starting from the Apache 200, Dominar 400, Ninja 300 etc.
SLIPPER CLUTCH PARTS AND INSTALLATION COST DETAILS: • TOTAL COST FOR INSTALL...
#slipperclutch #tvsapache #apache200 #tvsapacheslipperclutch
Slipper clutch working, slipper clutch maintenance, slipper clutch installation, slipper clutch ride, slipper clutch TVS Apache 200,
So how does the slipper clutch performs after 6 months? Here is the update video: ua-cam.com/video/__DprpAoFbI/v-deo.html
If you liked this video then the TVS APACHE RTR 200 review definitely deserves your attention: ua-cam.com/video/KW5LfJleZfg/v-deo.html
Can we install slipper clutch in cbr 150
i have been thinking for it,, i don't like it broo,,i loveeeeed it,keep us updated hows 200 performing after a sweet upgrade.
Bro....my rtr 200 v2.0 is making some gear shift 'thud' sound in every gear....what should i do ....can it be fixed?
Previously it was not there.....
And one more thing.....i m using motul 7100 10w40 ...what is the drain interval.?
Thnx in advance bro....
Amazing video man! BTW where did you buy the slipper clutch?
Very good and informative video. Thanks for making it. Can it fit in the RTR 160 4V housing?
Finally a youtuber who knows automobile mechanics
Ha ha ha... Thanks for acknowledging the automotive content 😊
Good how to apply in my TV's appache 200 were can to buying sleeper cluch
Hi Tapan,
I have mentioned all parts, their cost and part number here: ua-cam.com/video/oxDokGdCZv8/v-deo.html
Hi Srinivash,
The RR 310 has a different clutch assembly so this one won't fit.
@Shrinivash Murugesh , the bs6 model comes with a slipper clutch, you can source that from the new model to tours, would be a direct fit.
Waiting for u to cross 1 million subscribers..!! This video deserves appreciation !! Shared across all platforms
Thank you so much for the constant love and support from your end, I really feel blessed 😊
Finally a real motorcyclist!! Amazed!!
Thanks a lot for awarding me with that title! Really means a lot to me 😊
Finally someone from India to work on bikes like a pro!
Great going man, hope to seeing you grow!
Dude I don't comment much on UA-cam videos but honestly believe me this blew me away...!!! This is awesome I hope you reach new heights ..!!!!
-A new subscriber
Thanks a lot Akaash for the beautiful words of appreciation. Comments like this makes all the efforts worth investing 😊
Subscription is a big motivation to make more such content 👍
I think you are only person in India now to do this on your own! And being this much comprehensive is again next level..
I'm Soo happy and proud of you 😅🙌
Thank you so much Anantha, glad that you liked it and labelled it as next level 😊
I cannot explain ,how I feel inside - the moment you opened the gasket. Awesome bro. Your channel is a great book. Keep going, lots of love bro
I can totally relate with the feeling! That's a symptom of a true petrol head 😅 which we all share in common.
Thanks a lot for always valuing the content on the channel 😊
Yes, very few times I've seen someone not damaging the gasket while removing the part. To say, care is a must for every loved ones and things.
Hey brother maybe today the love that is being shown is less, but we all know with the talent you have, the day is not far when you become one of the most talked about person in the biker community. I wish you all best for your future endeavors. Really appreciate your efforts in bringing quality content to viewers...😎😎
Thanks Anugrah,
I am really feeling blessed after reading this. Thanks will be small locution but that's all I can say for now.
Anugrah David ...bus kar pagle
Bhai! Really love your videos. They are very very useful for us. Because we love our bikes and no one can't maintenance better than us even TVS service center.
Keep uploading videos
Thank you and we are supporting from Sri Lanka 👍🏻
Really happy to see a rider from Sri Lanka on the channel!
Thanks a lot for valuing the videos, really means a lot to me 😊
It's the real connection between a bike and a person. You're such a gem bro. ❤
Thanks a lot! Only true enthusiasts like us can understand this 😊
@@thesportztourer yes bro...as I'm watching your videos recently I've really admired by the commitment you're putting in. I'm also having an rtr 200 bro...thank you for your contents brother...keep doing great contents...you've gained my true respect brother.☺️
You made the whole process look simple 😁
I wonder why only few manufacturers include slipper clutch as a premium offering. Sometimes they include premium features in the same motorcycles that are sold abroad whereas they skip them in the local edition as if the biker community in our country has inferior value. They might argue that it's part of cost cutting but then at least it should come as an option. We indians even though say that we have plenty of choices in motorcycles but careful comparison with other countries reveals that it's not a prudent thing to say.
Very well said Akash, can't agree more with your points and suprisingly this is not just restricted to motorcycles, cars including luxury ones get lesser features including safety options here in India. It's the sad reality of Indian automotive industry.
You must get more views! I'll definitely share this video. Keep making more. All the best!
Thanks Pushkar for all the love and support to the channel, really happy to know that you liked it so much 😊
I already shared with my geeeky automobile friend........
i really like your language it's smooth,Humorous , Buttery keep it up
every video I've seen of yours is an inspiration and example to follow, respect!
I was not entirely interested in the subject but your voice over and good explanation kept me engaged in the video. Very good job with the video and voice over, keep it up brother
my mind just blown up after watching this🙏🙏😵😵😵🤯
many questions in my mind and I'll ask them in Insta..
I take this as a mind blowing comment 😊
@@thesportztourer haha 🤓🤭
Can I use this slipper clutch into the apache 160 4v
Yes tell me
@@kareemsks3377 hello bro can I install it on my RTR 160 4v
Plz tell me
Amazing work man. Keep discovering..
Thank you so much Jayakannan for the amazing appreciation 😊
Bro for the first time I'm seeing an Indian UA-camr doing thing this. Your work is just phenomenon. Awesome mechanics. Hope to see more exciting mechanics DIY videos from you.
That's a great idea of installing slipper clutch in normal bikes as clutch shifting becomes a headache in normal city roads traffic due to video it's just simple to explain the garage fellow for installation, great job bro keep it up👍
So true 👍
Thanks Savio for appreciating the efforts 😊
3:20 it's awesome.
Awesome for sure 😊
I am amazed everytime bro. Superb quality content. Kindly link the tools you have used here. I noticed Stanley's 1/2 and 1/4 inch drive socket sets. And I'm building my toolkit too. Thanks in advance.
Thanks a lot for the appreciation and the suggestion! Links added as per you comment 👍
@@thesportztourer appreciate it bro. 😊😊👍
I started laughing so hard when I heard the tech support voice lol!
Aleast the video made you happy 😊
Bro i subbed you when you had like 800 subs and now watching your video after a long time and i can say you are one of the best automobile UA-camr out there. Keep it up. Love from states.
Last year in January I got my RTR200, same matte black colour as you :-) Soon after that Race Spec 2.0 edition was available in the market and I was wondering if I should have waited for a month or so more but you my friend have answers for all my doubts. Fitting Slipper Clutch was a major one I had. Thanks mate and wishing you all the best for your channel. Keep enlighting us
Thanks Kshitij for the appreciation the efforts, means a lot to me 😊
Is there any update like this for Pulsar RS 200?
Bro..i have developed slipper clutch for rs and ns 200..please reply if u intrested
@@naveedaka im interested
Is your apache have ABS ? If no,then are you going to install it on your bike? please answer and!
HAPPY DIWALI!! May your channel gets more than million subscribers as you upload a quality video!!!!
Bhai please tell if it will fit in 160 4v
Hi Prakhar,
The RTR 160 4V does shares a lot of parts in common (as shown in the video). Only thing I have doubt about is the clutch housing and the number of clutch plates which more here.
@@thesportztourer make quick update video if it will fit on 160 4v
Dev Hansdah yes the Slipper clutch of the Apache 200 is also a direct fit on the Apache 160 4v as well.
@@rinaralte6648 is it seriously possible to install slipper clutch in 160 4V FI?
Deep Missen yes absolutely possible my friend
@3.20 I prejudged what you gonna say..and I was right ..loved it.just a very few youtubers into technical. 👍
Thank you so much for valuing the technical aspect of the video. I am glad that you liked it so much 😊
What a clarity you have that's the difference between a mechanic and an engineer
Thanks Ravi Mishra 😊
I believe curiosity and experience can surely improve an engineer's workmanship and we all are working our way on it 👍
Great 😍 what's the price of slipper clutch??
Price is Rs.2025 + labour charges (the SVC where I got it installed took Rs. 200)
Hi Akshay,
Give me some time (to cumulate the right data) I will make a detailed report, if possible will make a video of everything including part numbers and the prices of all the required spares.
Part Number - NF070010
Thanks Hitesh for confirming, Rs 200 labour from authorized TVS service? if yes then it's really reasonable 👍
You're welcome
Yes, it was at an authorized TVS Service Center
I know it is too much but i have already installed oil cooler of pulser to my rtr 160 hyper edge...so i m curious to know that it is possible to insall slipper clutch on rtr 160 hyper edge...pls reply
Hi Prashant,
The RTR 160 hyper edge does shares a lot of parts in common (as shown in the video). Only thing I have doubt about is the clutch housing and the number of clutch plates which more here.
@@thesportztourer thanks for reply bro....keep up the great work...
Hi
Prashant, I also want to fit oil cooler in my Apache hyper edge, so plz any help from you would be a great help for me. If you can send some snaps of your modified Apache in staveraj@gmail.com
Soon to hear from you.
@@firecelln80 yes bro. You can do that on your bike.
I have check all of them.
Planning to fix it within a month.
As like the sportztourer said, most of the parts in rtr twins and 200 are same. The have similar design, except balancer shaft on 200. That is the reason why 200 does not have 6th gear.
Bro what's the cost and does it fit for 160 4v ?
I have the same question
Yes i also need to know does it fit on rtr 160 hyperedge 160
I have installed oil cooler now loking forwars for this
What's the cost? N dose it fit apache 160 4v 2018 model?
Hi Rogit,
I need to check the RTR 160 4V for it.
@@thesportztourer keya is sleeper clutch ko koi or engine me install kiya ja sakthe
Finally a motovlogger who shows about bike and give tips to maintain but not their lifestyle where they are and what they are going u will soon cross 1 million excellent bro
Your English is well appreciative dude very well explained and had fun learning new things thank you ❤️
Do u have service centre❓❓Can u service my bike pls❓🙏
I wish I had 😊
@@thesportztourer even I do need help 🥺
Finally an automobile engineer on UA-cam with full-on mechanical knowledge.
Thank you so much for appreciating the efforts and supporting the channel 😊
Sir can use slipper clutch in Apache RTR 180
I feel the same.....when seeing the clutch hub
I mean just wooooow
Really beauty of engineering.
Your hands are absolutely very precise and clean. Road side mechanics scare me away the way they handle tools on today's bikes . Normal people like us won't be able to fix complex machine parts like clutch or engine parts on there own. they will require expert help any way .
Vry useful to us... Gud job nd gud video ever... God bless u
Liked and shared on FB! Wow i have been riding for 28 years now... I love riding but fear to touch the mechanical parts on my own except oiling of chain and setting of rear drum brakes due to bad experiences of the past kudos to you bro.
Good work. This is how we upgrade our machines.
Is this clutch assembly is available for Honda CBunicorn 150 ?
Bro can we install slipper clutch in Apache RTR 160 4v 2019 Model
You install that slipper clutch absolutely confidently. And it was a great learning watching you how you did it. Just one question will it work on my Pulsar 180 DTSi
Today I replaced my Rtr 200 4v normal clutch with slipper clutch Bs6 .... based on your video.
Is it working now ok .
Any further checks ?
you explain as passionate physics teacher. awsome 👌👌👌
Thanks a ton Srikanth! That's some BIG words of appreciation, means a lot to me 😊
Brother its very much helpful for me... Bcz i have also have 200 4v.. And i was thought how could i install slipper clutch and is it good for apache but yes now i am free its very much possible... Thank you for your information 😊😊
Sir , whats the reason for choosing STANLEY OVER TAPARIA OR KINGTONY while purchasing 1/2 " socket set ???
Sir thank you for your support. Where can I get slipper clutch assy for my unicorn bike?
Hi, I have been watching your videos recently, it's so decent enough to convey the message. The way you share the knowledge is so good and make the viewer to watch until the end of the video without boring.
Nice work sir...
Bro can i replace sleeper clutch on my apache 160 4v
I did in my R15 V2 and it working very good.
Great! Version 3's slipper clutch?
Hats off mate , what an explanation about each and every bolt , what type of bolt it is , what should be used to remove , great !!!
Thanks a lot for acknowledging the effort that has gone in making this video 😊
Glad to know that you liked it 👍
@@thesportztourer as i am a mechanical engineering student , i know a little bit about bolts and nuts....but what you have done in this video is a great work
Happy to see a mechanical engineering student here 😊 Appreciation from your side means a lot. Good to know you have keen interest in all these greasy stuff otherwise in today's world mechanical engineering is slowly shifting to just designing and analysis (which is not bad but that's not what mechanical engineering is all about 😊 ) I hope you take this point on a positive note 👍
@@thesportztourer what you said absolutely correct , i definitely take this as a positive one , thankyou 😇
And one thing i too have a Apache rtr200 , i make videos on some traffic awareness stuff as a social responsibility
very good and informative video with non intrusive music. I too have a 200 4v. looking forward to install the slipper clutch.
Keep on the good work
I really like the crisp english with the correct terms. 👍👍
Is it possible to do the same for Yamaha FZ25 (Iam planning yo buy the BS6 model.
You are great brother this video is really very helpful ,i have rtr2004v of 2016 can i install slipper clutch in it
Dude ur hand work was good. Much appreciated
Bro can i fit it into my gixxer sf 150 ....... Plz reply
Does it work on apache 4v 160 smartxconnect version ?
Me too looking for the same
Hi u doing great can I use slipper clutch for Yamaha r15 v1 bro and put some video for Yamaha r15 v1
Hi Praveen,
I got messages from Indonesian riders where they have fitted the slipper clutch of the R15 V3 on the R15 Version 2. They were unable to confirm if that was a direct fit or any other additional modification was required for the fitment. So Unless we practically check it, we cannot confirm on that 😊
You got skills bro... Even though I am not a motor enthusiast it was fun watching this video
Thanks a lot rider! it's a big compliment for me 😊
nicely done..great..is slipper clutch available for pulsar RS200?
Your voice is soothing and you have mentioned all the necessary details, but my question is will it work on apache 1604v bs6 edition?? It has a new technology called GTT, which I guess you already know.
I wish I was your neighbour..
I could learn a lot from you...
Nice video
Can i use in my rs 200?
Bro can we install a slipper clutch on sf 250 and where did you buy slipper clutch
Grt job . I have seen in Yamaha RD 350 . Hydraulic clutch . Will you make video on installation of hydraulic clutch replacement of wire clutch .
Brilliant video. Purely technical. Is it also possible on Avenger 220. Or probably baajaj bikes don't requires slipper clutch as the bike naturally slows down while riding..a phenomenon I don't understand only bajaj can help
I'm glad found your channel, and I'm subscribed it! Thank you for the great videos! I love your English speaking and its helping me as English speaker to understand your videos.
Hi Sir, it's a clean knowledgeable video 🙏. Please make a video on difference between normal clutch and slipper clutch. Had a doubt can we fit slipper clutch of KTM Duke 250 BS6 into KTM Duke 200 BS6?
3:25 Exactly.
Engine is one the best engineering ever.
Dear Sportztourer,
Can you guide us to purchase of "Crown type clutch nut removal tool". Preferably with it's specification.
Can you make some led headlight upgrade in suzuki GS150R
you are really awesome can you do the same in fz 250. i heard some people have use R15 SLIPPER clutch in fz 250 they both have same size
As I own a rtr 160 2v
& I was not sure that slipper clutch can be installed in it.
Thanks for this video,
From where can I purchase the slipper clutch & which brand would be the best?
Nice video 👍👍👍👍
Can it be replace with any normal 125cc bike...
I have watched some of your videos I really appreciate your efforts.
And keep creating this kind of video.
Please upload more servicing video so that we Indians don't have to go to service center who doesn't care about customer satisfaction.
Thanks!
Happy to know that you found the videos helpful and it's really satisfying to know that the videos are serving the purpose 😊
More videos for sure!
Hi, I have 2002 TVS Fiero and need to know whether I can install the above slipper clutch for my bike. You feedback is highly appreciated.
Marvelous sir But where can I purchase that slipper clutch assembly from? Plz
Reply
Sir can you pls tell me if this TVS slipper clutch can be used in Karizma zmr or any slipper clutch which can be used in Karizma zmr.
Your Videos are fun to watch, everything nicely explained, no jarring music. Subscribed!
Can we put Yamaha r15 v3 slipper clutch assembly in yamaha r15 v2 and r15s?
Good English Speaking with automotive expert youtuber... Nice video
Thanks a lot for the appreciation! Means a lot to me 😊
Can you make a video of fz25 adding a slipper clutch, some one is using r15v3 slipper clutch
Great informationa and the video is superb. Apache 160 4v dual disk abs model mein slipper clutch fit hoga kya?
Hey Which DNA or K&N Air as well as Oil Filter is compatible with RTR200 4v??? Any suggestion. Please
Can we do the same for rtr 1604v? I dnt own a rtr 200 but rtr 1604v. Pls make one video if possible
bro can i install a slipper clutch on ns 200
Please Upload a Video for MT15 clutch replacement
nice one bro....expect more & more vidz in near future. LuV from Bangladesh!
Thanks a lot!
It's a joy to know that riders from Bangladesh are loving the videos on this channel.
Love and new year wishes from India 😊
Hi bro.
My bike(Honda Hornet 2.0) was equipped with a normal clutch. The new model same engine spec comes with a slipper clutch. Can I install it on my bike? What's your advice I really want to know.
Your videos are great bro.😊
Very nicely explained. Video content and quality is too good.
Brother I have Apache RTR 180 2010 model 17000 Km run till now. Can I replace stock clutch plates with slipper clutch plates in my bike?
Aww superb..sir can i install it on fz 16
Osm...u deserve....1 million bro..
Thanks a lot for the love and wishes! Your comment made my day 😊
Does that brand of slipper clutch work on suzuki gsx s150?
Perfectly technical ! Great job guys !
Presentation is sooooo good.....
Can i modify pulsar 200NS normal clutch to sliper. Clutch or not ???
(hope you may reply back)
Is it possible to change honda hornet 160r clutch to slipper clutch ? please let me know , and if possible give me details. thanks