BIG UPDATE ON SLIPPER CLUTCH | TVS APACHE RTR 200 SLIPPER CLUTCH UPDATE
Вставка
- Опубліковано 10 лют 2025
- This is an update video on the slipper clutch installed on my TVS Apache RTR 200 4V. Here I have shared my experience in terms of performance in city and highways. Have discussed about the difference in clutch plates, their weights and finally if there was any change in fuel efficiency.
TOOL KIT USED:
STANLEY STMT72795-8 1/2" Drive Metric inch Socket Set: amzn.to/2PzQ9Qt
STANLEY STMT72794-8-12 1/4" Drive Metric Socket Set: amzn.to/2P0Grpd
Impact tool: amzn.to/2or9kQl
How to install slipper clutch: • HOW TO INSTALL SLIPPER...
Slipper clutch cost: • TOTAL COST FOR INSTALL...
Awesome video as always. Being a mechanical engineer & an automotive enthusiast, it's always satisfying to watch your videos.
Thanks a lot Chinmay, means a lot to me 😊
@@thesportztourer , I can watch your videos again & again, but I will never get bored 😊😊
@@thesportztourer can you do a video regarding hand guards for RTR 200?
Thank You so much brother...I'm having an rtr 200 (2017) that does not having a slipper clutch. Now I feel this is the time to change my regular clutch to a slipper clutch as I'm feeling more confident after watching your video. ❤❤❤
Thanks for clearing air around Engine Breaking. My CB350 rocks in-built Slipper clutch. Learnt something through the video ✌️
I have installed slipper clutch on my 2012 r15 v2 it works great..😊
Any issues after installation??
I'm planning to install on my Fzv2
@@ManAndMachines. no issues sir.
@@rajathari3536 any changes in gear shifting or mileage?
@@ManAndMachines. yes gear shifts are lot smoother with lighter clutch pull and my bike gives 45+ with normal riding conditions.. For better results use motul 7100 10w50..
@@rajathari3536 how much mileage before installing slipper clutch?
after watching your video I have installed slipper clutch in my 160 4v
tafheem salahuddin, did you install?? How it been?
That's great!
How is your experience?
Really ???
The Sportztourer
for first few kms I was facing shifting issues.Past 100 kms clutch was butter smooth.
@@tafheemsalahuddin4438 is it suits 1604v?
😍 They must hire you bro!
Ha ha ha.. this is a big compliment for me 😊
Thanks buddy! You are Champ 😀
It's a joy to read that 😊
Thanks Rishabh!
Bro, your videos are too technical for us to enjoy 🤯
Ha ha ha... Now I get the reason behind the super slow growth of this channel 😅
P.S: I hope you are enjoying your 200 4V 😊
Best information about Slipper Cluch.....
Bro plss vlog regularly, we are waiting for your videos
Hi Rakesh,
I really try hard to bring these videos. Believe me the interest and appreciation from riders like you fuels up the motivation to make more videos 😊
@@thesportztourer can we install slipper clutch on RTR 160 fi 4v
@@thesportztourer bro I'm also a regular viewer so please tell me can i put the slipper clutch to my apache 160 4v ..? Please reply me I'm waiting for this so long
@@thesportztourer can we install slipper clutch in bs4 pulsar 220f
Dear,your work is great.i want to know can I install slipper clutch to rtr 160
Slipper clutch does a grt job actually...its very much helpful....plz post the installation video of it....
Hi,
Here is the installation video: ua-cam.com/video/Vxyz4GVt9i8/v-deo.html
Hi @The Sportztourer ! Have enjoyed all your videos and it has really inspired me to finally be able to take care of my bike with all the informative videos on your channel.
I have a RTR 200 BSVI model and wanted to ask if the clutch lever pulls in towards the grip slightly when accelerating and goes back when you’re off the throttle? I found a few answers online which hinted that it’s a characteristic of slipper clutch systems, just want to confirm if you’ve faced something similar on your RTR or any other bike with slipper clutch.
Thanks once again for all the great work, keep it up 👍🏽
Awesome like always 😊
Thanks a lot 😊
Thanks brother for making this video.
Most welcome 😊
Your videos are very informative bro
Thanks a lot Ritan,
Happy to know you found it informative 😊
@@thesportztourer keep going👍
Superb, please please review 160 4v 🙌🙌🙌
Wow!! Thank you for the vid 👍...can i install it on my xpulse4v???
Waiting for more videos!!
On the way 😊
Hey Buddy, I wanted to say this a long back but couldn't. Can you do a video on gear ratios in motorcycles. How changing the sprocket setup changes the power delivery and other stuffs like impact on bottom end torque, acceleration, mid range, top end power, fuel efficiency. If possible, you can try changing sprocket front may be in apache rtr 200 to check the performance in the above-mentioned aspects. I think this will be a good topic from engg. point of view also. What say...
May be not 1 video but a series of 2 3 videos of your experience and all if possibl3
Long back I did that on my 180 and had a mixed experience. Let's see if I can do that again.
Thanks for bringing this point up 😊
Awesome video
Awesome
Thanks for sharing.
Most welcome 😊
Nice video. I own TVS Apache 200 4v which doesn't has slipper clutch as of now. My bike is 4 years old ( bought in 2016 June ). Just wanted to know if I can replace my clutch plate with normal ones or slipper clutch.. if I fit slipper clutch then will I face any problems?
How did u change the Slipper Clutch without changing the Housing... The housing was diifferent in Slipper Clutch
Hii bro After watching this video all myths are busted about slippery clutch long usage 👍👍👍
Glad to know that the video has served it's purpose 😊
i'm using suzuki gs150r 2011 model, is there any possibility of installing slipper clutch to my bike, if yes kindly suggest
Hey, would like a quick a update on how the slipper clutch long term review
Is there any difference between pick up? Or in top end?? Or any other issues ur video r awesome olz upload regularly
Bro hi I am return today Satara to Thane back my Apache 200 4v no problem and give me decent mileage 😉
That's great Sandeep,
Satara to Thane has got some good roads to enjoy the RTR 😊
@@thesportztourer thanks
Hi bro can we install this in pulsar 220, 2016 model
Please let me know
Brother , can i fit this tvs 200 4v slipper clutch into tvs rtr 1604v bs6 model?
Hi, I like your video on the slipper clutch and I am intrigued to have it installed in my discover 125t which is due for a clutch set change. Is it possible to install a slipper clutch in it?
It's only an upgrade so that I can preserve the bike better as I have moved on to other vehicles....pls suggest.
Is there any options for avenger 220 street 2016 ??
Please help me out. I want this mod to be done on my bike.
I bought an N160 6 months back and if i have to do same mod which sleeper clutch assambly should i get?
Make video on cone set problem and solution.....for apache 200
ball bearing issue in my apache
Hi Akshay,
To be honest I am yet to face that. Apart from the adjustment during the first service the cone set was not touched. Have noted your point, will try to make a detailed video in the future 😊
I also got this upgrade but now it feels difficult to put the bike in neutral. Any one else facing something similar?
Hi this Mahesh from Chennai,
In my RTR 200 can I install slipper clutch
Can I install on my cbz Xtreme 2008 model plz reply
@sportztourer I realised one thing with my experience with slipper clutch and and m sharing with u..that last plate u put with all plates pls put it in the last slot in the clutch assembly as your old assembly is holding...it makes difference with slipper clutch and it should not put right away with all plates. Add one one clutch and pressure plate if it is not fitting as ur old one has more plates
Last plate should be in apposite direction...it gives clutch more room to slip and engage...just try it once...u ll feel the difference...best vdo as always...
Thanks a lot Prashant for the suggestion and appreciation. Have taken a screenshot for this and will analyse this 😊
I am always excited to read this type of technical comments 👍
@@thesportztourer have you analysed it bro?
Is their any vibration you feel?
Bro very informative video appreciate your work. Please suggest me a best tyre for this beast. Thank you 🙏🙏
Pirelli angel city go for it bro
Thanks a lot Shahrukh,
As already mentioned by @amU Pirelli ACT are really good in terms of grip.
@@thesportztourer thank you 🤗🤗
and sorry bro i got to mention one more thing can you make a video on swing arm how we can inspect it or change it by our self because i met with an accident got my swingarm pushed towards left side the problem is when i take right corner my mufler got touched to road every time
Nice video. Is this video shot in lonavla?
Thanks Sagar,
Not all but a part of it 😊
Can you please post an video on abs installation on apache200 4v from abs model to non abs fi model??
Hi Ashiq,
I would suggest you to have a look at this video: ua-cam.com/video/WgWusoipC0U/v-deo.html
Hi Bro,
Can we install slipper clutch in gixxer sf 150 2016 edition?
Hey please reply i have sf 250 can I swap slipper clutch assembly with bajaj n250
Can i install it on my apache 1604v. And how much does it cost?
Cost is around 2500/-
@@EOW919 but can i install it in my 1604v?
@@DarkForestAllinone have you installed or not
Which engine oil would be best for 200 4v? Grade please
Bro go for Motul 10w 40 7100 or 300v
Better to go motul 7100 or motul 300v grade 10w40 for excellent performance
@@KandukuriTeja bro I've ridden 4500 kms till now ..so can I go for this ( motul 7100 10w 40 ) oil BTW I own Apache race edition
Yes you can feel the change
in service center they putting oil called synthetic oil, is that is good or not ??
Sir I found some difficulty in gear shifting after installing slipper clutch to my 160 4v
Amazing video. Could you please make a video on installing the R15 v3 slipper clutch directly on the R15 v2? I've asked for this to you long back. There are many videos on UA-cam from Indonesia people doing that. But they've used their regional language in their videos which is impossible to understand. Please consider doing this. You'll receive a lot of appreciation on UA-cam.
Thanks a lot for the appreciation and suggestion. I personally don't own a R15 V2 or V3, If I had then I would have really tried it 😊
ua-cam.com/video/Mlhc8KKtwlQ/v-deo.html
Bro please suggest any good mechanic for Apache in Mumbai..🙏🙏
Hello bro can I install slipper clutch in my ns200 ?????
Plz reply bro 🙏
Hello brother
Can I install the slipper clutch in my 160 4v BS6?
Pls comment
I want to try this on KTM RC 200
does you do high speed test before and after installing slipper clutch
Hello boss. Can i install this in my rtr 4v 160cc.
Love from bangladesh
bro i just wana know after installing slipper clutch on rtr 200 while while doing engine breaking does rear tyre get locked or not i think you have not mentioned in video or i haven't seen video properly 😁
I want to install it to my honda xblade plz suggest which one to go for..
Hi Chayan,
As far as I know right now slipper clutch is not available for Xblade.
Thanks for the video. One doubt though...Will the slipper clutch will have more wear and tear compared to the regular one considering riding aggressively in same manner in both bikes...What I mean is If i manually matches the rpm in the old fashion, will it makes less/more wear and tear conpared to the SA clutch...thanks
Hi,
Point noted, just slipping should not cause excess wear unless we always test the clutch for fun (which applies for regular clutch as well). I will keep a check on this and update accordingly 😊
Is it possible to install on honda sp125 bs6. I dont want to decrease my uelefficiency milage instead want a smooth gear shifting.
Hey. Does it also increase chain set life for spirited riders.
Hi! Can you do it only for rtr200 or even for any bike?
Can you just that this setup will work on rtr 160-180 engines...that would be a great help
He concluded it with mentioning that this wasn't a beneficial modification.
Hi Surojeet,
Last time I enquired TVS service said the clutch shaft dimensions are different on 160/180 and 200 so this probably won't fit.
@@thesportztourer thanks for enquiring bro. I love you videos.. informative on point.. keep making them😊😊😊
Can I use it in ns200 n which bike clutch u r using
Does We install this slipper clutch in Apache 160 4V
You would have to check the size of the clutch plate housing. If it is same in size you can surely fit. But I think rtr 160 has a smaller clutch housing.
Hi,
As already mentioned by @Nobody's Angel, I doubt the dimension of clutch shaft is same on both the engines. Last time I enquired with TVS service they said the clutch shaft is different.
I have seen our local tvs install the slipper clutch from 200 4v in the new 160 4v and old apache 180. They also said it could be installed in the old 160. It was a direct replacement and it works just as well, if not better. The slipper clutch costs rs.2050, you have to pay for the service charges and also new engine oil as it has to be drained.
acording to parts catalogs of rtr180 and rtr200 4v, they share the same gearbox and input / output shafts part numbers, so its possible the clutch fitment on the 180.
Bhai plz make a video in abs installation
Hi Balu,
Do check this video: ua-cam.com/video/WgWusoipC0U/v-deo.html
Brother thanks for the long time review
Can you assist me with this idea
Is that possible to fix the slipper clutch from yamaha R15 V3 to Yamaha fz Version 2.0
Or can i use TVS RTR 4V slipper clutch to Yamaha fz Version 2.0
Hi illan,
The FZ V2 uses a different clutch housing and shaft so this won't fit. R15 V3's slipper clutch can be installed on V2 but yet to find if it's a direct fit on FZ V2.
Thanks brother 😊
Hi, some of our local mechanics have installed the slipper clutch from R15v3 to the FZ25 and FZ16 series bikes. However, they need a little bit of machining and tinkering to get it placed properly. Feedbacks from guys who have installed the slipper clutch in FZ25 has said- clutch and gear shift is much, much smoother, pickup from 1st gear seems a bit down but not so much that it makes a difference, but improves considerably from 2nd gear onwards. ua-cam.com/video/Mlhc8KKtwlQ/v-deo.html
Plss make a video on how to install slipper clutch in fz 25
Sir i have also apache 200rtr non abs can abs install in my bike?
Can i modify slippers clucth on apache 1604v.?? Please tell me anyone
Brother the clutch plate of 160 4v and 200 4v is sams
I have to put slipper clutch in 160 4v
I have rtr 200 white version 1 can i install slipper clutch and can you please tell me how much does it costs
Bro please install ABS also . i know that its not possible and more expensive.. but I want to see the way you install . Please for your viewers..
Does the Same clutch will fit for RTR 160 4v model...
Bro ......can we make the front suspension a little softer.....as it is filtering rough road to my arms
Hi Tuhin,
Unless we go for a mechanical change nothing much can be done apart from shifting to lighter fork oil (for damping).
Bro can we install abs in non abs apache 200 i have apache 200.
And i want to install abs in my non abs apache 200.
I am waiting for your reply.
sir which bike sleeper clutch you instal in your Apache..
👍
Can I install it in 160 4v
Please reply buddy?
How can I find slipper clutch online? Would you please help me.
Does my Rtr 200 2018 model comes with Slipper clutch pre installed ?
bro i like your touring videos from that inspiring December 7th i bought APACHE 200 4V RACE EDITION 2.O ABS now i have doubt about TRIP F;
TRIP F CARRIES HOW MANY LITER PETROL?
and what is your average speed of P3 | THE RAJASTHAN RIDE because you got 44.10kmpl thats amazing (if you remember then share the avg speed on that ride bro)
I HOPE FULLY WAITING FOR YOUR REPLY.......
Thanks a lot for valuing the videos 😊
Have made a specific video on tank range, you can check it here: ua-cam.com/video/aey0yzpfNbI/v-deo.html
i would like to install this on my pulsar rs 200... do you think will it fit on pulsar? i need some feedback sir... pulsar rs200 also have 6 plates on the stock clutch assembly... hope this will fit... where can i buy this ? by the way im from the philippines
bro i have apache 200 2017 model without abs in chandigarh...at that time abs model was not available..but the dealer told me that abs can be fitted later also as tvs has provided space for it...but now they are saying that abs can't be fitted? so can it be done in other tvs agenies in bigger cities like delhi?
Hi Snehul,
I did make a video discussing the same 😊 here is the link: ua-cam.com/video/WgWusoipC0U/v-deo.html
Wanted to know if slipper clutch can be installed in Pulsar 150 bs6 twin disc. And benefit or drawback on this mod.
It can't because of the way of the engine setup in pulsar, pulsar is a commuter so the bajaj mechanics has cut of any room for installing any other clutch plate
i want to install slipper clutch in cb hornet160r need your suggestions..
plz guid me.
Hi Rohan,
Right now slipper clutch is not available for Hornet 160.
How to install slipper clutch in duke 200 bs6
Hi, i am using a 10 year old Apache 160 and it is getting hotter after around 50 to 60 km, can you help to cool it? I am regularly changing engine oil.
Hi,
Have you checked the air filter and sparkplug. Make sure the chain is adjusted for correct slack. Finally you can tune your carb accordingly 😊
It can also fit in Apache RTR 160 OR 180????
Plz reply because i am also planning to install in bike
Hi,
As per the information from TVS service the clutch shaft dimensions are different on 160/180 and 200.
Yes, it is a direct swap for both the bikes. Tvs servicing can do it if they want to. Its like replacing the clutch housing and friction plates, but with an upgraded version.
acording to parts catalogs of rtr180 and rtr200 4v, they share the same gearbox and input / output shafts part numbers, so its possible the clutch fitment on the 180.
Can we install this in 160 4V ?
My question is same bro
nice bro
Bro from past 2yrs am facing gear sensor issue in my RTR 200,they changed around 6to 7 sensors still the issue is there?
Honda shain ko slipper clutch lgega sir
Hey hy!
Thank you so much for this video!
I was waiting to upgrade!
My only question is is this the slipper clutch from RTR version 2.0?
Because I have plans to upgrade my existing clutch!
Hi Srihari,
Yes, this slipper clutch is from version 2.0. Thanks a lot for valuing the video 😊
You know what, let me take time to appreciate every video you have made till now!
Man I'm so happy for you, taking time out of your busy schedule to make videos that help a lot of people like me!
🙏🙏
Can I Install Slipper Clutch in Rtr 160 4v.
Can we install slipper clutch into fz25??? Urgent!
Bhai kya ye pulsar 220 mei bhi install ho skta hei
Hello bro, I own RTR 200 race edition 2.0 which has slipper clutch. I feel my gear shifts are hard and makes noise while shifting. From past 5 days after adjusting my clutch engine is making loud noise once I cross 70. As company claims RTR 200 is best for City rides but mine requires frequent gear changes as compared to ns200. If it is issue relating clutch setting please make a video showing adjusting clutch. I have watched your previous video of clutch setting but not able to do same. Please help.
Bro I too own Apache race edition I just clocked 4500 kms till now and bike is pretty smooth and surely better than NS 200 I too had a confusion before buying Apache but no regrets now Apache is far better compared to other bikes in this segment ..and coming to your issue I too faced this pblm but after first service everything became smooth and character of the bike came out after 1000 kms ..gear shifts are hard because of lack of lubricant and proper clutch adjustment .. service guys ll make it out ..don't worry Bro after oil change u can feel your refined engine.
Ride safe !!
@@elishabattiri9048 bro I have already completed 6500kms and done 3 oil changes till now. I lubricate chain every 300 once, even though gear shifts makes noise and bike doesn't rev smoothly.
@@pkrishna1167 bro have you reported this issue in the service centre,if so..what they said? My suggestion is...Ask the service guys to change your clutch cable and should be adjusted with minimum required clutch play...and for your bike performance proper tuning of carburator is required so that you can smoothly rev your bike.. carburator tuning shouldn't be too lean or too rich,it should be optimal..just give this conditions to the service centre I'm sure this tips ll sort out your issues..
@N. Chauhan yup it's a good bike though..but I chose Apache because of engine refinement, reliability,features,mileage,ride quality and practicality ..All these things comes under lesser price compared to fz25😉!! We can tour happily on Apache 200 by crusing btn 80-90 with an average of about 42-45 kmpl!!
@N. Chauhan yes bro fz25 has more torque and Apache too have enough tourque to ride over Ghats easily...if price doesn't matter then go for Fz25 👍
Slipper clutch is also compatible with karizma zmr?
bike gear me clutch dabane pr bhi bhag rahi he,
Bhai mene slipper clutch install to kr liya, pr
free nahi ho rahi