Awesome video bro. Being a mechanical engineer & an automotive enthusiast, it is always satisfying to watch your videos. Keep us all motivated with your detailed videos like these.
Am Very fond of motorcycles especially my 2014 hero Xtreme and l became very big fan of you after watching your videos regarding daily commute and maintainance...
Hey, man. Once again, a very detailed, informative, and useful DIY video. I can understand the hard work and effort that has been put in making this video. Appreciate your dedication. Keep it up. Cheers!
Thank you bro..I'm getting my first carburetor 4 cylinder this weekend. I'm new to carbs. Always loved injection. But I couldn't resist getting a hornet 250
Great video as always. Also a small suggestion would be using surgeon's gloves. You may find them at your local medicine stores for as low as 10rs per pair. It'll help you have a better grip on the components. Thanks! 😇
I do have heavy duty gloves but the problem is most of the times I have to handle the camera and frequently taking off and on the rubber gloves is not easy (read time consuming) hence I use these disposable gloves, I hope I was able to explain my situation. Thanks a lot for valuing the video 😊
Sorry for asking a question but this one is interesting...can we add custom RPM metre with the help of the sensors...I think it's possible coz you said in video that ' Will remove the sensor '... So tell me bro...your the one who's boasting my interest towards this ..⚠️⚠️🔥🔥🔥🔥🔥🔥🔥🔥🔥❤️❤️❤️❤️❤️❤️
Unless the fuel quality is really bad you can maintain a 10000km cleaning interval (can be extended if you are not facing any serious issues). Thanks a lot Deepak for valuing the information, means a lot to me 😊
Hey, can you tell what is the function of breather hose. The one on mine (200 4v) is broken. Mechanic at workshop says it doesn't really serve a function but i belive if it was useless it wouldn't be there. Manufacturer ensure removing anything which is not needed .
as usual .. this Diwali it had to be the carb overhaul, a douze of that NIKAVI did the trick 😋😋 happy and peaceful revving. Your next vid must be of an early morning well-tunned carb with it's sound signature @da draken'z endcan😎👀 Gr8 video ST! 🏁
I likes all the videos especially the slipper clutch. Thanks for all the informative video. I have pilot jet upgraded to 38 from stock 35. Now i am struggling for the idle RPM setting. currently i put 2 and half turns out but still doesn't satisfy me. i am unable to find the right settings. could you suggest me on tuning of the carb. note: Its Karizma July 2003 motor (1st lot).
My CO is high while i tested for pollution test.. It happened many a times . A year ago i went to the service center and they washed my carb.. But now it is happening again.. Mns co lvl is always high Should i clean it once more...?? Using rtr 160 bs3 Btw love ur videos ur videos r always genuine
Hi, This one amzn.to/2PzQ9Qt is enough for regular maintenance (fits for most of the nut and bolts from 10mm). You can add this: amzn.to/2PzQ9Qt to complete the set.
The motorcycle was suffering from cold starts and pick up issues (jerky throttle response), it's been a month and now everything is super smooth plus the fuel efficiency has improved.
Cleaning carburettor is recommended ? Many of the service men in the service centre says that removing and cleaning is not necessary for these bikes ( i have rtr 200 )
Hello bro...I got a question for you...I have splendor pro..well ridden 30,000 km...but somehow it is making some weird noises from the engine...the mechanic says that need to change the timing chain...can we tighten up the spring on which the timing chain relies ...what can we do instead of changing the chain ?? Answer please...
Thanks 😊 The motorcycle earlier had cold starts issues plus it use to give a jerky/snatchy throttle response after 3000 RPM which is completely gone now 😊
Hi bro, I have a new rtr 200 which seems to have carburator issue. The issue is that after a ride the bike leaks 2-3 drops of petrol from a tube below the bike and stops without any further leak. If its leaking should leak always right? Any idea?
My RTR 200 air fuel mixture screw of carburetor has damaged and now it is not available in any service center and retail store, so from where could I get it now. Please help me for that my bike performance is too bad because of that one jam screw 😩😣
One of the best and detailed Carburetor cleaning video I find in UA-cam 😊👍
Awesome video bro. Being a mechanical engineer & an automotive enthusiast, it is always satisfying to watch your videos.
Keep us all motivated with your detailed videos like these.
Am I the only one who got excited after seeing his notifications?!
Me2
True. Me too.
Me too
Me too 🤟
Thank you !! Excellent work !!
I am from Srilanka and its all in english thank you
Am Very fond of motorcycles especially my 2014 hero Xtreme and l became very big fan of you after watching your videos regarding daily commute and maintainance...
You r the best ...editing All right and clear information ❤❤
Hey, man. Once again, a very detailed, informative, and useful DIY video. I can understand the hard work and effort that has been put in making this video. Appreciate your dedication. Keep it up. Cheers!
I CAN SEE AN UPCOMING UA-cam STAR IN YOU..
ye kar diya to I can open my own mechanic shop... salute bhai :D
Clear understanding of the components.
thanks for your effort man really killed the video with your clear Articulation and video editing skills.
Thank you so much @Sai Varun for appreciating the efforts and supporting technical content like this ❤
Thank you bro..I'm getting my first carburetor 4 cylinder this weekend. I'm new to carbs. Always loved injection. But I couldn't resist getting a hornet 250
Bro you make the best of videos please dont stop your work....your loud clear and detailed explanation is the best....Keep growing 😎🤘
This is a real pro level DIY ! Even most mechanics do not have the kind of professionalism you're showing.. Excellent video !!
You explained like a professor. Great.
Thank you so much for valuing the efforts! Really means a lot to me 😊
best video on UA-cam till now.
Great video as always. Also a small suggestion would be using surgeon's gloves. You may find them at your local medicine stores for as low as 10rs per pair. It'll help you have a better grip on the components. Thanks! 😇
I do have heavy duty gloves but the problem is most of the times I have to handle the camera and frequently taking off and on the rubber gloves is not easy (read time consuming) hence I use these disposable gloves, I hope I was able to explain my situation.
Thanks a lot for valuing the video 😊
@@thesportztourer ooo now I get it... And yes videos have always been top notch... I'm here for the long haul... Let's make it to 1 Million soon! 😁❤️
Well explained everything detailed. Loud and clear.
Very useful video for servicing the cv carburettor .
Nice video and i really like the presentation of the video.
Bro it's to to good & every one will do it very easy...thank you so much
👍 For your efforts & hardwork
Your knowledge about this stuff never ceases to amaze me... 🔥🔥
guess never going clean one, but so pleasing to watch it.
Very nice video clarity is good. Thanks for taking this effort
Thank you so much for appreciating the efforts and supporting the channel, really means a lot to me 😊
Very Good and detailed every bit of it.Keep it up good luck
Thank u very much . Very very very useful and best video available
in depth and very Informative video... very well explained.... thanks for providing such content....
This is way better than ENGINEERING EXPLAINED
Sorry for asking a question but this one is interesting...can we add custom RPM metre with the help of the sensors...I think it's possible coz you said in video that ' Will remove the sensor '... So tell me bro...your the one who's boasting my interest towards this ..⚠️⚠️🔥🔥🔥🔥🔥🔥🔥🔥🔥❤️❤️❤️❤️❤️❤️
Very nicely explained Sir👍
I was waiting for this video. Well shot bro
how did i missed this video, Thank you for sharing this, i always follow your video for DIY maintenance.
Thanks a lot Praful! happy to know that you like the video 😊
Beautiful presentation bro , I always follow you...
Best carb cleaning video
I have no words to say ...loved it ..😘
It's a joy to know that you liked it so much, appreciation means a lot to me 😊
Need more UA-camr now days like you # detailed information # keep it up
One question after how many km unicorn 150 require to clean carburator
Unless the fuel quality is really bad you can maintain a 10000km cleaning interval (can be extended if you are not facing any serious issues).
Thanks a lot Deepak for valuing the information, means a lot to me 😊
Excellent video ... Keep the videos coming in...
I have some issues on removing the carb float screws its very tight what to bro any suggestions -I have rtr 200
Best carburettor video
Hats off to you Brother....🎩🎩
Excellent work 👍
Thanks ❤
Watching from Bangladesh.
Hey, can you tell what is the function of breather hose. The one on mine (200 4v) is broken. Mechanic at workshop says it doesn't really serve a function but i belive if it was useless it wouldn't be there. Manufacturer ensure removing anything which is not needed .
Highly informative video.. thank u..😊
Very much informative. Thnk you bro.... Good work keep it up
Very well made!
Very usefull video sir
My bike carburetor cleaning sir
as usual .. this Diwali it had to be the carb overhaul, a douze of that NIKAVI did the trick 😋😋
happy and peaceful revving.
Your next vid must be of an early morning well-tunned carb with it's sound signature @da draken'z endcan😎👀
Gr8 video ST! 🏁
High Quality Videos 😍😍🔥🖤
Camera work very clean
Very lovely & helpful video 💥💥💥👌👍
Ur hard work appreciatd
Thank you so much Amit for appreciating the efforts. Happy to have enthusiasts like you on the channel who take interest in these technical videos 😊
I am having a hard time with dazzler carburettor tunning. Your help will be highly appreciated
Hi,
What kind of problem are you facing?
Great content quality I've got a 160 4v so I guess I could use this too
Another fantastic video 👍
I likes all the videos especially the slipper clutch. Thanks for all the informative video.
I have pilot jet upgraded to 38 from stock 35. Now i am struggling for the idle RPM setting. currently i put 2 and half turns out but still doesn't satisfy me. i am unable to find the right settings. could you suggest me on tuning of the carb.
note: Its Karizma July 2003 motor (1st lot).
My apache 200 bike powerdrops during accelerating this is intermittent what could be reason
Excellent Video... 👍
Very nice,clear and helpfull. Thank you
My CO is high while i tested for pollution test.. It happened many a times . A year ago i went to the service center and they washed my carb.. But now it is happening again.. Mns co lvl is always high Should i clean it once more...?? Using rtr 160 bs3
Btw love ur videos ur videos r always genuine
Hi!
I clean my motorcycle's carb once in a year. Have you checked your air filter?
Thanks a lot for all the love and support.
What is the use of TPS? And how does it work?
Thank you. Nice👍😊
Can you suggest a good socket set that would fit most of nuts and bolts of my rtr 200?..
Hi,
This one amzn.to/2PzQ9Qt is enough for regular maintenance (fits for most of the nut and bolts from 10mm).
You can add this: amzn.to/2PzQ9Qt to complete the set.
@@thesportztourer thank you sir!... *RESPECT*
Hello bro thank you for the video can we use WD 40 to clean the carburetor?
Bro, Can i use Nikavi Carburetor for my honda shine 125
Bro my bike Pulsar 135LS' carburetor slide (piston) has some scratches. So what will be the effect of it on the performance??
Excellent video.
1. Is this an Apache 200 carb?
2. Will that cleaning spray damage the seals???
Hi my customed Bajaj sunny into pocket bike after carburettor cleaning it is not starting
Super bro 👌👌👌👌
TPS sensor aapne nikala tha usko set kiya ya nhi
Any difference in pickup or smoothness after cleaning carb..? Did you notice any other changes too..??
The motorcycle was suffering from cold starts and pick up issues (jerky throttle response), it's been a month and now everything is super smooth plus the fuel efficiency has improved.
@@thesportztourer great to hear that. Thank you. Keep uploading videos.
Very nicely shown.
Cleaning carburettor is recommended ?
Many of the service men in the service centre says that removing and cleaning is not necessary for these bikes ( i have rtr 200 )
Correct it is maintenance free
@@ashithcalicut as a mechanical engineering, nothing is maintenance free
Sir I have black smoke problem in hero duet Scooty .... please Reply
Indian ChrisFix ki jai ho! Jai ho
Thanks Ranajoy! I am taking your comment as a big compliment 😊
Wht is the purpose of throttle position sensor in carburetor type.
Please make video on all you tools that you have
i bought my RTR 200 RE 2.0
does fuel additive is better than this manual cleaning?
Nice video sir, i learned feom it👍😁
It's a joy to know that you found it informative 😊
Thanks for the appreciation!
Hello bro...I got a question for you...I have splendor pro..well ridden 30,000 km...but somehow it is making some weird noises from the engine...the mechanic says that need to change the timing chain...can we tighten up the spring on which the timing chain relies ...what can we do instead of changing the chain ?? Answer please...
Hi Ronak,
Ask your mechanic to check if the timing is ok. Better get the timing chain replaced (peace of mind).
@@thesportztourer wouldn't be it premature to change it on 30,000 km... totally agree with you bro but...
Yes, it's a kind of premature specially for a Splendor that's why I said to check the timing first 😊
@@thesportztourer so what should tell him...I mean he's telling me straight to change..I told him if the tappet gap is correct or not ..
Bro pls telll or video upload hero hunk bike air screw how many turn
Hey brother. Nice detailed video! Can you comment on how your bike feels after this whole clean up? Is it performing better?
Thanks 😊
The motorcycle earlier had cold starts issues plus it use to give a jerky/snatchy throttle response after 3000 RPM which is completely gone now 😊
Hi bro, I have a new rtr 200 which seems to have carburator issue. The issue is that after a ride the bike leaks 2-3 drops of petrol from a tube below the bike and stops without any further leak. If its leaking should leak always right? Any idea?
Hi, is this Chinese EL cheapo carb?
Can I clean diaphragm by the petrol 🤔 please tell me and that i clean 🤔
Sir my is Cbz xterm my problem is automatic off can you explain problem
My RTR 200 air fuel mixture screw of carburetor has damaged and now it is not available in any service center and retail store, so from where could I get it now. Please help me for that my bike performance is too bad because of that one jam screw 😩😣
Much awaited and much needed video, thank you sir much appreciated....
Crisp & clear 👍
Bhai pulsar 220 ka carboreter apache 200 lg jayega nd kux frk pdega plz riply krna
Dislike karne walon ko lagta hai samaj nahi aaya .
😂😂😂
sensor kabhi alag nhi kerna chaiye usko set kerna bahut mushkil hai
@@rajafriend3366 konsa sensor Ko nahi set karsaktey!!!
Wonderful video 👏👏👏
Thanks! Happy to know that you liked it 😊
All video very interesting and helpful..
Can i clean carbo by w d 40?
perfect explanation, thank you
I'm fitting this carburetor starting problem.?
So much nice information
What will we do.if drain screw is jamed
Hi Gunjan,
As said by Rahul WD 40 should help, also lightly tap the screw head to help it free from the stuck point.
Thanks for your time and knowledge,
Honda Shine 2012 model Petrol cock off karne ke baad kitne km chalta hai ??
Average check karne ke liye??
Can we clean jets with pure acetone for better cleaning if you don't have carb cleaner?
Hi!
It can be used on metal parts but try to keep it away from other rubber and soft plastic parts.
What is the odometer reading of this bike that you cleaned carburettor..??