No End of video Edit: I used three of these so far and they're even good for micro ATX motherboards too, because it has cutouts for that too which I found pretty surprising. I did had that same issue with the cutouts being covered by a full size ATX motherboard with one of the builds tho
Awesome vid. You covered all of the points that matter. Please include the fan speeds and a clip with audio of the pc for reference for us in future case reviews, please.
I believe you can and it will just be controlled by a button on the case, however it's been two years since I've had this product I don't really remember for sure
@Dj_yt_3000 I had these case like 2 or 3 years ago so don’t quote me on this but if I remember correctly you have to power your fans with a SATA cable but you can control the ARGB from a 3 pin header on your motherboard. May be best to just consult your manual
The case came with a fan hub that had an ARGB cable sticking out of it so I used an ARGB splitter to link them up. At least I think I did, this build was over a year ago lol
It's been about 2 years since I had this case. I believe you pull the whole front panel off like normal by pulling on the bottom of the panel. You might want to consult the manual or find some other review about it to confirm, though. BTW love the profile picture 😁
Bro, I bought the same casing and set it myself, but the ARGB cable of my motherboard is four pins. I can't connect the ARGB cable. What should I do now? Please reply
@@anasmohammed4638 but the mesh elite have 2 140mm PWM Argb fans and usb 3.2 gen 2 type - c port under 6000 rupees Where can you get these specs at this price And functionality matters more than nicer look if you want only look the there available many more cases at very low price go grab them
How do I default the fans on this to the motherboard ARGB control? I have different brands of fans in this case from Thermaltake and stuff and I want them to all be synced up together with my Ram and AIO.
great vid bro! love how the parts looked inside the case! your cable management skills are on point!
Thanks!
No
End of video
Edit: I used three of these so far and they're even good for micro ATX motherboards too, because it has cutouts for that too which I found pretty surprising.
I did had that same issue with the cutouts being covered by a full size ATX motherboard with one of the builds tho
Awesome vid. You covered all of the points that matter. Please include the fan speeds and a clip with audio of the pc for reference for us in future case reviews, please.
Thanks for the input, I will for sure be covering that in the next review
would i be ok with a micro atx motherboard?
yes
Great video man! Keep up the good work!
Have u changed the front fans
They are the stock fans that come with the case
@@pcflippingcentral means that rgb effects was of case fans right
Hey there, can i connect the fans on psu sata cable since i dont have argb header on my motherboard?
I believe you can and it will just be controlled by a button on the case, however it's been two years since I've had this product I don't really remember for sure
Nice review!
Thanks!
I wish i could see how those propietary fans connections look like , nice review though
Can i control the case fan lighting with mobo software
@@masklask4444 yes you’ll just need to connect the fans to your motherboard using the ARGB connector
How do you connect the fans to a Msi b 550 mother board pls help
@Dj_yt_3000 I had these case like 2 or 3 years ago so don’t quote me on this but if I remember correctly you have to power your fans with a SATA cable but you can control the ARGB from a 3 pin header on your motherboard. May be best to just consult your manual
How did you make the cpu fan sync with the proprietary fans?
The case came with a fan hub that had an ARGB cable sticking out of it so I used an ARGB splitter to link them up. At least I think I did, this build was over a year ago lol
how to remove front glass to clean?
It's been about 2 years since I had this case. I believe you pull the whole front panel off like normal by pulling on the bottom of the panel. You might want to consult the manual or find some other review about it to confirm, though.
BTW love the profile picture 😁
Nice vid, that's a nice knife where'd you get it?
amazon lmao
Like i would buy the nzxt case but i have a budget and this case is amazing
Bro, I bought the same casing and set it myself, but the ARGB cable of my motherboard is four pins. I can't connect the ARGB cable. What should I do now? Please reply
You don't need the rgb cable connected for the rgb to work. You just can't control it via software, only with the button on the front.
Is this prebuilt?
Not sure what you mean by that
@@pcflippingcentral it means was the cable and powering already in when you brought the computer
@@faboii56 this is just a case, not a whole computer
@@pcflippingcentral so it's custom made
@@faboii56 sure i guess
GUYS YAMS VIDEO OMG
💯
Quality review, but the case is just an antec nx410 without mesh
ig but the case is about 20-30 cheaper and a quite a bit smaller
@@tmlmagee The NX410 is a 60€ (63$) case
@@enixa47 it’s usually 80-90 here in the USA on amazon and other retailers
Please make video on it's upgraded new version Gamdias talos E3 mesh elite that's an awesome feature loaded case under 70 bucks
I prefer without mesh it looks nicer
@@anasmohammed4638 but the mesh elite have 2 140mm PWM Argb fans and usb 3.2 gen 2 type - c port under 6000 rupees
Where can you get these specs at this price
And functionality matters more than nicer look if you want only look the there available many more cases at very low price go grab them
Please tell me bro can we controp rgb colour?
There's a button on the top to switch the colors
@@pcflippingcentral can i controll them by motherboard?
How do I default the fans on this to the motherboard ARGB control? I have different brands of fans in this case from Thermaltake and stuff and I want them to all be synced up together with my Ram and AIO.
Does the main fans of the case can controlled by motherboard?
asmr
I have it and love it
It sucks in air flow management ..which is very bad for gamers..80-90° just playing for 1 hour (any game)
Pretty bad..dn't buy this..
I bought it in white for 55