Thanks for this man, I'm doing a build for a guy at my work and this case looked promising but I wanted to make sure this case wasn't gonna be a nightmare to build in lol.
Just picked this case up and a XFX Speedster RX6700. The interwebs says its 304mm long. I'm am going to get it to fit. Both will be here in a few days.
I'd say this is a great micro or mini ATX case, cause if you put an ATX motherboard inside the RAM may get in the way of the RAD on top. I've come across this in a lot of Mid Tower cases.
no. 4-pin system fan connectors have ground, 12v and two pwm signals to send data between mainboard and fan. you could solder them onto a fan connector and do voltage control without any pwm signal that reads out rpm.
Hey man, nice review! I have one question, my motherboard doesn't have an argb header. Is it possible to light up and change the light color using the case switch? How did you do that using only a psu? Just connecting the sata power cable lights up the led and changeable by the led switch?
great review man. im having a problem with the lights not turning on for the fans. they were just turning on fine but all of a sudden they wont turn on anymore and i dont know why?? i am connecting the sata cable to the psu not mobo.
Hey John, How you doing? just built a PC and i stuck on choosing a cabinet its been a week. It was very easy to buy cpu and motherboard. LOL. I have msi motherboard which has dedicated 6x sys Fan slots and there are very less options with cabinet providing plugging fan's power directly to motherboard. Really dont know the consequences if there would be any. What do u suggest? does it make any difference powering fans from PSU or should I stick to MSI cabinet which has options in its fans with pwm + ARGB header. Thanks in advanced.
I have this case in white, its lovely, one thing i found out, if you press and hold the LED button on the case it hands control of the fan colors to the mother board, nice if you have a LED light on your CPU fan so you can match them, however i couldn't find a way to control the fan speeds, any ideas. I also put an ASUS TUFgaming B550 Plus WIFI ii ATX and it fitted great, I put most of the cables through the three slots just under the right edge of the board, no problems.
First guy I found to actually mention the led button controls the lighting. For some reason every one else left that out of their review.
we need a video to know how to connect fans on mother boards without argn header, please
Well explained and reviewed. That was really helpful
can the front panel be removed? The picture in the site implies that it can come off
it can come off but it’s just really hard
cant understand how to connect the fans to the motherboard argb header.. it just wont work
Thanks for this man, I'm doing a build for a guy at my work and this case looked promising but I wanted to make sure this case wasn't gonna be a nightmare to build in lol.
hi im looking to buy this which one is better mesh vs the glass panel one??
@@happyxd2484 I bought the same one in the video (mesh). Glass should be fine as long as you make sure your cooling is decent
@@happyxd2484Depends on what you want the mesh one might provide slightly better airflow but the glass one really looks great, i bought the glass one
So the case fans run full speed always,right?
Can u show how u connect all FANS
I'm going through that right now. Glad to know I'm not alone 😊
@@calbk78Did you do it?
If you, like me, couldn't connect all FANS to the motherboard, connect them via SATA directly to the PSU. if still relevant. @@calbk78
Did anyone figure it out yet?
@@isaiahjackson7991 You are also looking for this
Just picked this case up and a XFX Speedster RX6700. The interwebs says its 304mm long. I'm am going to get it to fit. Both will be here in a few days.
Did you get the graphics card to fit inside the case ? I'm looking to buy a 7800 XT that is 302mm long...
Yes. It fit snug with a little under an inch to spare. @@reykonist
Really well review! Keep it up
Thank you!
I'd say this is a great micro or mini ATX case, cause if you put an ATX motherboard inside the RAM may get in the way of the RAD on top. I've come across this in a lot of Mid Tower cases.
True
Yeah, getting an AIO in here would suck.
Where does the other fan plug go? What does it do?
How do you connect the fans to a Msi b 550 mother board pls help
Is there a way to convert the SATA power connector into a 4-pin system fan connector?
no. 4-pin system fan connectors have ground, 12v and two pwm signals to send data between mainboard and fan.
you could solder them onto a fan connector and do voltage control without any pwm signal that reads out rpm.
Hey man, nice review!
I have one question, my motherboard doesn't have an argb header. Is it possible to light up and change the light color using the case switch? How did you do that using only a psu? Just connecting the sata power cable lights up the led and changeable by the led switch?
Same question
Yes
Use the SATA rgb controller if your mobo doesn’t have a header and wire the reset button to the led prongs 👍
@@TheNetGuy That was quick! Thanks a bunch man. Really appreciate it. Subbed
Hi! Question, is there any dust filter in the front of the case for the keeping out the dust?
Just the mesh
Cual es la fuente de poder donde conecto los disipadores?
So was it worth it
Can someone please help me, I got this case but the fans aren’t spinning and there’s no led. I have the msi b550 a pro
Thanks buddy,gr8 content! Is this casing's airflow better than the glass one?
Yes of course. But the different is not soo much.
great review man. im having a problem with the lights not turning on for the fans. they were just turning on fine but all of a sudden they wont turn on anymore and i dont know why?? i am connecting the sata cable to the psu not mobo.
did your issue get fixed?
Hey John, How you doing?
just built a PC and i stuck on choosing a cabinet its been a week.
It was very easy to buy cpu and motherboard. LOL.
I have msi motherboard which has dedicated 6x sys Fan slots and there are very less options
with cabinet providing plugging fan's power directly to motherboard.
Really dont know the consequences if there would be any.
What do u suggest? does it make any difference powering fans from PSU or should I stick to MSI cabinet
which has options in its fans with pwm + ARGB header.
Thanks in advanced.
can you control the led case fans with mobo software?
Nice video jon.
Will it provide enough airflow for rx 7600xt and ryzen 5 5600?
is thia hub a dust filter after the mesh in front?
I have this case in white, its lovely, one thing i found out, if you press and hold the LED button on the case it hands control of the fan colors to the mother board, nice if you have a LED light on your CPU fan so you can match them, however i couldn't find a way to control the fan speeds, any ideas.
I also put an ASUS TUFgaming B550 Plus WIFI ii ATX and it fitted great, I put most of the cables through the three slots just under the right edge of the board, no problems.
Thanks a lot. I was thinking why can't I sync my case fans. I was reconnecting and checking the cables for 30 mins. Thanks a lot brother
so can I run the pc fans just from that sata cable to the psu and not the motherboard and use the light button
With a controller yes
@@TheNetGuy can u explain which controller and how to do it plz 😿
I like glass front but confused with mesh front
Which one is better?
Mesh absolut!
@@huchehregenimmt_26 Why mesh? good airflow?
@@sainic1803 yes, Glas in the Front is shit. Mesh is much better
I choose glass
How can I connect this fans with that cable I have it rn and idk what to do
Bro did you ever figure it out?
@@robertojoseph2548and did you?? I have the same problem
yo did u figuire it out? my fans dont work at all idk where to put em@@robertojoseph2548
does it supports atx mainboards??
Can I mount an Atx main?
See with gpu can it fit 3 fan gpu
Is there a $100 mobo that this case suports
Fit a 3060 12gb in it