Thanks for the video, this sold me on the case. I have a i7-8700 and 2070 Super left over after I upgraded my parts, so I bought this case and a CM Hyper 212 cooler to put the "old" parts in, now it's going to be a living room PC once it's built
great build but flip the radiator to move the tubes to the bottom. It will help with longevity as air will go into the pump the current way its mounted
I read the comments from time to time even if I don't upload as much. anyway, you should be able to pop out the front panel. it's kinda scary cause you have to use a bit of force, but it'll come off.
I have this case in white, its lovely, one thing i found out, if you press and hold the LED button on the case it hands control of the fan colors to the mother board, nice if you have a LED light on your CPU fan so you can match them, however i couldn't find a way to control the fan speeds, any ideas. I also put an ASUS TUFgaming B550 Plus WIFI ii ATX and it fitted great, I put most of the cables through the three slots just under the right edge of the board, no problems.
It's a good-looking case, one of my favorites. But for some reason front and rear fans are different. Front fans have 6 leds, but the rear fan has only 3 leds. Also, the frames of the fans are different.
Know your budget and go from there. I would start with choosing the processor and a motherboard (they must be compatible). The rest of the components you can choose and then upgrade over time. It's very tricky building a PC nowadays because prices are very inflated due to world events. Best of luck!
Hey, any way you could do me a huge favor and measure how much space there is for a gpu? It says online that the max length is 300mm, but the card I want is 305mm...
Bro, I bought the same casing and set it myself, but the ARGB cable of my motherboard is four pins. I can't connect the ARGB cable. What should I do now? Please reply
@@smokeyd300 yeah my specs are Atx motherboard Coolermaster hyper 212 Gtx 1080 I7 8700 Evga 650 psu 16 gigs of corrsair ddr4 vengeance ram I also filled every fan space with a fan. The airflow is pretty good my max temps are 70 on CPU and 80 on GPU
Circuitry bro..in other videos, they are saying that 240mm radiator Can be mounted on top and they proving in their video as it doesn't disturbs the ram stick.. What's your opinion???
I had one question.... Does the 3 argb fans on the case require 3 separate fan and argb headers to connect to the motherboard??? Or you can daisy chain 3 fan cables to one fan header in the mobo and 3 argb cables to 1 argb header? Do I need to buy a hub for that?
Hey i just bought hermes e3 keyboard from amazon , and after opening the keycap they turned out to be huano instead of outemu , do you know which one is better and should i get a replacement as the reviews said outemu
How do I connect my fans to my motherboard? I have a gigabyte motherboard and the fans are connected but they are stuck on blue. They’re connected to the motherboard and everything and yet I can’t control the lights with RGB Fusion.
@@sadmanshakib6301 I have an MSI X570-a pro, which has 2 3 pin 5v ARGB headers. The fans were already connected to one of them via the given ARGB plug in cable that came with the case. All I had to do was plug it into the mobo, and hold down the RGB button on the case to switch it to case fan LEDs to mobo control.
I bought this case yesterday. I was just wondering if the included fans are compatible with Gigabyte RGB fusion as I can find the fans model anywhere on google.
Hey I Wana Buy this case but my Mobo has only 1 Argb header and I Will also buy a Argb CPU Cooler Will that be a problem? Can I Control all Argb with just 1 Argb header from the Mobo does this case have Any kind o Controller hub or something? Plz reply man
I currently have a build I did with extra parts and bought this case THE Bgears b-Voguish Gaming PC with Tempered Glass ATX Mid Tower, USB3.0, Support E-ATX, ATX, mATX, ITX. for $61.00 Amazon.. great case for the price, haven't found a better one yet.. I was looking at the Gamdias for a second build but this case is just awful for a budget build with AIO cooling.. here's why,.. Front panel NO HINGES... STRIKE 1... MAGNETC filter on top USELESS and a PAIN IN THE ASS.. STRIKE 2 .. Inside case will NOT FIT MODERN VIDEO CARDS BIG STRIKE 3 and not to mention this case is total crap and should just say FOR MICRO ATX ONLY... This case is a HUGE NO SALE for me... and the cutouts for the cables are NOT DEBURED cable management is a nightmare on this case..
Do not buy this..air flow sucks on this one...buy the mesh version..or u can buy some good gase with good air flow and its more cheaper than this shit..i can suggest you if you want..
Thanks for the video, this sold me on the case. I have a i7-8700 and 2070 Super left over after I upgraded my parts, so I bought this case and a CM Hyper 212 cooler to put the "old" parts in, now it's going to be a living room PC once it's built
Thank you so much, you really helped my on a discussion on getting this case . I’m gonna order my self one now 💪🏼
Nice! I'm glad the review helped.
How’d it go
great build but flip the radiator to move the tubes to the bottom. It will help with longevity as air will go into the pump the current way its mounted
He explained in the video why he couldn't do that, GPU got in the way
Can we use the RGB pre installed fans with out motherboard having any RGB header and will the RGB works if no what should I do ?????
Great review!
Thank you, much appreaciated!
dream setup
It's a nice one :)
Isn't there any button to off rgb light when needed?
Yea you can turn off the lights. I've had to leave my computer on overnight a few times and they can be very bright.
Hey man don’t know if you’re still checking comments and stuff but how do you take out the rgb fans infront of the case itself?
I read the comments from time to time even if I don't upload as much. anyway, you should be able to pop out the front panel. it's kinda scary cause you have to use a bit of force, but it'll come off.
I have this case in white, its lovely, one thing i found out, if you press and hold the LED button on the case it hands control of the fan colors to the mother board, nice if you have a LED light on your CPU fan so you can match them, however i couldn't find a way to control the fan speeds, any ideas.
I also put an ASUS TUFgaming B550 Plus WIFI ii ATX and it fitted great, I put most of the cables through the three slots just under the right edge of the board, no problems.
It's a good-looking case, one of my favorites. But for some reason front and rear fans are different. Front fans have 6 leds, but the rear fan has only 3 leds. Also, the frames of the fans are different.
How did you get the front panel off ?
I have this case and can't figure it out.
Remove the 2 side panels and just pop off the front one. You just gotta go for it.
I'm planning on building a pc not sure where to start
Honestly depends on price.
First you must learn what all the components do. I can recommend you a build if you give me a budget.
maximum $500
Also you need to get a WiFi-Bluetooth dongle or you won't be able to connect to WiFi or Bluetooth. Unless you don't need it and use an ethernet cable.
Know your budget and go from there. I would start with choosing the processor and a motherboard (they must be compatible). The rest of the components you can choose and then upgrade over time. It's very tricky building a PC nowadays because prices are very inflated due to world events. Best of luck!
Dude it keeps deleting the link from pcpartpicker I wanna send... Maybe it's not working bc if the anti spam comments
Hey, any way you could do me a huge favor and measure how much space there is for a gpu? It says online that the max length is 300mm, but the card I want is 305mm...
How did you take off the front panel, I can’t figure out how to remove it to install an air cooler
If I remember correctly, you just gotta pop it off.
Would a asrock A320M-HDV motherboard fit in this case by chance?
Bro, I bought the same casing and set it myself, but the ARGB cable of my motherboard is four pins. I can't connect the ARGB cable. What should I do now? Please reply
Your motherboard has rgb header you need an argb header
Hey, atx mb's do fit but they are a pretty snug fit.
good to know. Do you have it with a graphics card and everything? I wonder how the airflow is.
@@smokeyd300 yeah my specs are
Atx motherboard
Coolermaster hyper 212
Gtx 1080
I7 8700
Evga 650 psu
16 gigs of corrsair ddr4 vengeance ram
I also filled every fan space with a fan.
The airflow is pretty good my max temps are 70 on CPU and 80 on GPU
Circuitry bro..in other videos, they are saying that 240mm radiator Can be mounted on top and they proving in their video as it doesn't disturbs the ram stick.. What's your opinion???
It is supposed to fit, but I think my ram sticks are too tall
I had one question.... Does the 3 argb fans on the case require 3 separate fan and argb headers to connect to the motherboard??? Or you can daisy chain 3 fan cables to one fan header in the mobo and 3 argb cables to 1 argb header? Do I need to buy a hub for that?
Hey i just bought hermes e3 keyboard from amazon , and after opening the keycap they turned out to be huano instead of outemu , do you know which one is better and should i get a replacement as the reviews said outemu
How do I connect my fans to my motherboard? I have a gigabyte motherboard and the fans are connected but they are stuck on blue. They’re connected to the motherboard and everything and yet I can’t control the lights with RGB Fusion.
@@sadmanshakib6301 yeah, they were already connected you’ve just gotta hood the button down on the top of the case lol
@@sadmanshakib6301 I have an MSI X570-a pro, which has 2 3 pin 5v ARGB headers. The fans were already connected to one of them via the given ARGB plug in cable that came with the case. All I had to do was plug it into the mobo, and hold down the RGB button on the case to switch it to case fan LEDs to mobo control.
can you tell me if I can turn off the lights of this case using that led button?
Help me with the name of the other case shown in the video
2:48
Nzxt
NZXT H510
I bought this case yesterday. I was just wondering if the included fans are compatible with Gigabyte RGB fusion as I can find the fans model anywhere on google.
@@sadmanshakib6301 not yet unfortunately but I guess they are not compatible
Does the case come with the fan controller?
how are the temps? is this good for a ryzen 5 3600
Oh yea it will keep the 3600 nice a cool :)
hey, would this case be apt for i5 11400f (with external cooler) and 1050ti?
What do you mean by "external cooler?"
@@smokeyd300 I mean a third party cooler that doesn't come inside the processor box 😂
Do the fans actually work
As in, Do they move air around? Yes they do.
would you have to buy the parts or do the come with the case of the tower
Comes with 3 fans and obviously you need to buy the other parts it’s just a case
how many fans can it contain?
It's been a while since I had this case, but I remember there being space for 5 120mm fans all around.
Can you give me your 3d wallpaper link?
They're all from Wallpaper Enngine on Steam, it's free and they look so good!
@@smokeyd300 Ngl looks supreme and unique
Fit in this case 12 inch gpu lenght?
Does it support any software like can I change the colour that is not in this case
Do you have ryzen usb issues?
No issues :)
Have u changed the rgb fans
Hey I Wana Buy this case but my Mobo has only 1 Argb header and I Will also buy a Argb CPU Cooler Will that be a problem?
Can I Control all Argb with just 1 Argb header from the Mobo does this case have Any kind o Controller hub or something?
Plz reply man
MSI MAG force 100R, its decent enough alround
Hey that one looks pretty good 😄
Can i controll the fans by mb?
is there way to control fan
DIYPC ARGB Q3
3:09
6500xt
uhh... that part hurts
oof
Luckily, there are other options. This video was featuring that card, but I'm sure there are better ones out there.
yes there are@@smokeyd300
thanks for the reply !
It will fit a tax I just put one in there
It might, but it'll be a tight fit.
I currently have a build I did with extra parts and bought this case THE Bgears b-Voguish Gaming PC with Tempered Glass ATX Mid Tower, USB3.0, Support E-ATX, ATX, mATX, ITX. for $61.00 Amazon.. great case for the price, haven't found a better one yet.. I was looking at the Gamdias for a second build but this case is just awful for a budget build with AIO cooling.. here's why,.. Front panel NO HINGES... STRIKE 1... MAGNETC filter on top USELESS and a PAIN IN THE ASS.. STRIKE 2 .. Inside case will NOT FIT MODERN VIDEO CARDS BIG STRIKE 3 and not to mention this case is total crap and should just say FOR MICRO ATX ONLY... This case is a HUGE NO SALE for me... and the cutouts for the cables are NOT DEBURED cable management is a nightmare on this case..
Do not buy this..air flow sucks on this one...buy the mesh version..or u can buy some good gase with good air flow and its more cheaper than this shit..i can suggest you if you want..
Thx
Is it possible to install 4 nos 3.5mm hdd in this case?