Camping at an Alpine Lake
Вставка
- Опубліковано 8 лют 2025
- sorry for all the shaky video. I am trying out a new way of filming. Hopefully it will continue to improve for the next one!
if you want to get some Conheck Offroad swag, and support the channel, you can find all the goods here: conheck21.crea...
Honestly, as we talked about before, it's that E-fan. I had the CSF with no shroud and ran the stock VK fan but overheated on a consistent hill climb. It took me going back to OEM radiator, Pathfinder fan shroud and stock fan for me to not overheat anymore. I have a shrockworks full front bumper with winch and it stays cool. FYI, the OEM fan on the VK gets uncomfortably close to the CSF radiator.
~ guy you got the steering rack from in sac.
Ah I recognized your handle! That’s what I’m thinking as well.
So oem xterra radiator, pathfinder shroud, and vk fan
@@conheck_offroad i wanted the CSF to work so bad but it's too big for the shroud and the modifications that I did to the shroud to make it fit cause the shroud to break loose on the freeway and jam into the fan causing the fan to stab the rad. I ended up swapping it up in a gas station parking lot to finish my trip. Once I did that - never overheated again.
@mycbtech well that may just be what I need to do then.
It’s interesting. There is a guy near me that has the csf and efans with 0 issues on his swap. Running 37s 🤷🏻
What thermostat are you running? If you are on the stock thermostat, have you tried switching to the 370z thermostat since it has a lower opening?
We went up the back way to coyote flats up in Bishop and my Xterra on 33 a Tacoma on 32 and JLU on 37 . All off us where hitting 230 temperature and my tranny hit 260+. All three rigs were pulling timing. Just part of the game. Just a thought were you in 4 low? You'll be surprised how many people keep it in 4 hi.
I was in 2wd most of the way
Are those shirts available? Also is it stock radiator?
Shirts are available through the link in the description! Along with stickers and hoodies.
It’s an aluminum dual row csf radiator
I'm only part the way through your video but have you burped the radiator?
Yea. We vacuum bled it when we put the new one in
@@conheck_offroad ok got ya 👍
I think the shroud on the efans is too restrictive and not letting enough air flow through the radiator. But I don’t know for sure
@@conheck_offroad I've heard the same thing on the forums.
@thedude828-ed2nn my thought is to just remove the shroud and put the fans right up against the radiator. If that doesn’t work. Switching to stock shroud and fan