Make flush-trimming a breeze with this Super Cool Bandsaw Jig
Вставка
- Опубліковано 19 бер 2022
- Support what we do at www.kmtools.com
Make flush-trimming a breeze with this Super Cool Bandsaw Jig. Today I take you through the idea phase, prototyping and finalizing this amazing jig that makes the first step in flush trimming a breeze. It can also make thin rips really easy and is one of the cooler jigs I’ve made.
Let me know what you’d like to see next! Please like, comment and subscribe.
----
Support what we do at www.kmtools.com
5 Pack of Templates (ready to use in your jig) kmtools.com/collections/templ...
Free Plans kmtools.com/collections/plans...
T-Track Bolts and T-Track Knobs kmtools.com/collections/stop-... These are the same ones we use in the K-M Stop Block and are super high quality.
K-M Tools Router Spiral Bits kmtools.com/collections/km-to...
We just upgraded all the Hardware in the Stop Block including a much Larger Brass Thumb Screw. It is Awesome! (new knobs not in picture but any that ship will have upgraded version. kmtools.com/collections/stop-...
The Bandsaw Flush Trim Jig That Will Cut Your Work In Half
----
*Check out OUR BRAND NEW STORE for tons of great TOOLS and Support the Katz-Moses Woodworkers with Disabilities Fund*: www.KMTools.com
Buy the Katz-Moses Stop Block: kmtools.com/collections/stop-...
Buy the Katz-Moses Magnetic Dovetail Jig: kmtools.com/collections/dovet...
*Buy the Katz-Moses Woodworking Apron*: kmtools.com/collections/workwear
Donate to The Katz-Moses Woodworkers with Disabilities Fund kmtools.com/pages/kmww-charity
----
I have Walnut Slabs for sale: kmtools.com/collections/walnu...
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/30bA39o 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Woodworking in SLOW MOTION Playlist:
• Slow Motion Woodworkin...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
My Apron: kmtools.com/collections/workwear
My favorite Dozuki dovetail saw - shop.kmtools.com/dozuki
My favorite Ryoba saw - shop.kmtools.com/ryoba
Marking Gauge: shop.kmtools.com/dbmk
Marking Knife: shop.kmtools.com/dbmk
NEW Suizan Flush Trim Saw: shop.kmtools.com/flush
Narex Richter Chisels: lddy.no/ussg
Knew Concepts Coping Saw (best deal I’ve found): lddy.no/120mz
Dewalt Planer Package: amzn.to/2thEf6O
CMT Chrome are the Absolute Best Table Saw Blades (JKM10CMT for Additional 10% Off)- lddy.no/ggf9
Great Small Tape Measure: lddy.no/120n2
BLEM Combination Squares (high accuracy and value at a fraction of the price due to cosmetic scratch): lddy.no/120n3
The ABSOLUTE best Sandpaper on the market: lddy.no/10ucv
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
5 Minute Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
2:1 High Performance Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
Dewalt Trim Router: amzn.to/3Ay6c7D
Dewalt Full Size Router Kit: amzn.to/3FH8Njp
Dewalt Planer: amzn.to/2YSkpiS
Bosch 1.25 HP Colt Router: amzn.to/3DzNjmF
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
Musicbed SyncID:
MB01RIGSMONJWTQ - Навчання та стиль
*Support what we do at* www.kmtools.com
*5 Pack of Templates (ready to use in your jig)* kmtools.com/collections/templates/products/bandsaw-flush-trim-jig-5-pack
*Free Plans* kmtools.com/collections/plans/products/bandsaw-flush-trim-jig-digital-templates
*T-Track Bolts* and *T-Track Knobs* kmtools.com/collections/stop-block-and-t-track-accessories These are the same ones we use in the K-M Stop Block and are super high quality.
*K-M Tools Router Spiral Bits* kmtools.com/collections/km-tools-signature-router-bits
We just upgraded all the Hardware in the Stop Block including a much Larger Brass Thumb Screw. It is Awesome! (new knobs not in picture but any that ship will have upgraded version) kmtools.com/collections/stop-block-and-t-track-accessories/products/the-katz-moses-universal-no-deflection-stop-block-version-2-0-1
This is amazing… my home shop is a tiny shed shop, so bandsaw and router are my primary tools. This is a game changer. Thank you!
Brilliant idea! Saves the stress/anxiety of running in to your template and ruining it. I really enjoyed watching your prototyping process too, makes me feel a bit better that I take about 5 attempts to get an idea to work!
Amazing Jonathan. Keep Walking & Dusting!!!! Greetings from Greece
Haven't been around in a while, but it's videos like this that made me fall in love with your channel in the first place. This jig will allow me to accomplish so much more in my limited workspace. Time to upgrade some more router bits and research bandsaws. Keep it up JKM, you're a true inspiration!
And this is why I dig your channel so much. It’s such a brilliant idea. I’m sure after a bit of tweaking it’s going to be a great asset to anyones shop. Thanks for sharing
Thanks Jonathan, your a bloody legend.
I’m about to start my first major bandsaw project and now because of your template I can have so much more confidence of not wasting material. 🐨
Been cobbling this concept together for years outta scrap and a clamp but never put the effort into making anything worth keeping. Thanks for doing that part!
I almost didn’t watch this video for some reason but this is MADE for me! I am guy who hates to freehand stuff, so this really speaks to me. Especially on the bandsaw I’m very prone to go over the line by accident if I’m not super slow and this looks like it could get you really close really fast. More than the accuracy, the safety net of being prevented of going over the line is what speaks to me. ❤️👍🏻
I see a lot of UA-cam videos that label themselves as brilliant. THIS ACTUALLY IS BRILLIANT!!! I mean who hasn't sweated bullets trying to get as close to the line as humanly possible free-handing it to minimize the amount of material the flush-trim bit will have to take off. I definitely will make one of these.
One of the very best clips I’ve watched ,.Anywhere any subject , no waffle , no time wasting and a pretty good project to boot. It even ovvercome the language problem as I’m a Brit !
Of to check out your web site , keep them coming.
Ridiculously smart idea! So simple yet so effective, I’ll definitely be making one of my own
Great idea man! As always, enjoyed the video. I think one of the best things about prototyping ideas like these is it puts yourself in the problem solving mindset when accomplishing other challenges
That’s an incredible idea. Slapping the forehead. How hasn’t anyone thought of that before. Nice work dude
Thanks bud. It really made it so easy to go to the router table. Was a big win IMHO.
What a great idea. I can visual so many things I can do with this. You are very generous to have free plans.
Bought a set within 3 minutes of the video. L fence for the band saw. So simple it's brilliant. Game changer.
so simple yet so functional! Thanks for sharing your wisdom and plans to make this. Much appreciated !
This is right up there w/ one of your best ideas/jigs. I'm always nervous when doing a bandsaw cut for a template situation and as a result I often leave too much material on the work piece. This is jig is awesome!!!
Sooooo Excited for my new KM Tools 1/4” Flush Cut Bit to get here tomorrow! The bearings, coating, everything looks perfect .
You’ve done it again! Brilliant.
This is sheer genius! And EXACTLY what I need! Amazing. Thank you :)
As soon as you said you’d sell this on your website I bought a pack. Video wasn’t even done yet when I had the confirmation receipt. Absolutely brilliant idea. Can’t wait to use it.
Wonderfull idea... I love that jig...THANK YOU
awesome idea!!!! safety and efficiency are always my number 1 and 2! and this is definitely something i can see myself using! heading to the store now! Can't beat that price
Wow. Just wow. Amazing.
thank you Katz . very clever on your part.
I like these and will make a set. I'm in a school with 3 bandsaws - one of them can get over that tight corner problem, it has a second slot on the other side of the blade.
I received your bandsaw jig and it works great! Thanks for good UA-cam stuff!
One of the coolest ideas I''ve seen lately.
Awesome set up. I use an L-Fence on my table saw a lot for straight line template cutting and I have a similar system to what you came up with for curve templates on my bandsaw. Nice job.
Good thinking Jon. Keep on smiling.
Brilliant idea Jonathan!! Love it.
That's a really cool idea and presentation of the design process.
This is genius I just had to send this to Cam with Blacktail Studio. This seems a lot safer. Good Job
I'm running down to my shop to make this jig, Thanks for the great idea.
Awesome idea... especially as i have just bought my first bandsaw!! Thanks Jonathan 😊
Me, too.
Wow, that’s super cool! Great idea!
Great idea for small production work!
Very nice application. Similar to the Michael Fortune bandsaw jig in Fine Woodworking #199 for cutting template curves. His “finger” was clamped to the table instead of in the miter slot.
Nicely done video!
Yes, you have make a great point: Flipping the template to the bottom of the workpiece simplifies the jig build and is obviously the stronger option. The downside is that the jig is hidden from view and following the jig will be done by memory + feel.
Ingenious!!
To use your words, “Holy Crap!” This was ingenious! I’ve been putting off cutting some wood with templates because it’s a pain having to use a jigsaw to get close to the line before using a flush-trim bit. Can’t wait to try this out.
Your the man!! Thanks for this!!
Great tool. I also enjoyed watching the template creating process.
Wow this is awesome very neat congrats on sharing this. Brilliant!
Jonathan - very clever jig! Love it. Just ordered some bits off your page. Can’t wait to test this out!
That jig is awesome 👍🏻👊🏻 Fantastic work my friend
Brilliant idea man. Just awesome.
Really nice and educational video.Interesting to watch and learn the process of prototyping. Thanks.
Great idea! I will make one! Thanks.
I use plunge router base with spiral bit and bushing to make close cut for templates. Of course it requires several passes with small depth increment, but it works well.
Such a perfect idea. Faster than cutting templates on a cnc.
Excellent video and a great idea
Great idea man. Thank you
excellent idea!!
This is awesome!
Awesome, your channel just gets better and better 😁
Awesome idea well done
Dude, genius! 🤯
Thats a great idea. And as a result since the router bit is not taking off a lot, you won’t have the possibility for a lot of chip out.
Brilliant!!
I don’t recall if it was rockler or woodcraft but they made this jig many years ago so it’s nothing new but it never caught on. Your status may make it something again!
Amazing 🤩!!!!
Great idea JKM!
Very clever. I wish I'd have seen this before my last project.
Sorry for all the comments, but this solution has got me all excited. here's another comment. It makes no sense for me to try and make these when you are offering a 5 pack for $9.99. I'm old, so when practical I rather spend money to save time, then spend time to save money. Plus I also get to support your channel. PS. I would have paid more than $9.99. :-)
Thank you for a great video!!!
This is a great jig
I just ordered a set, I hope it works with my bandsaw.
It's like an L fence for the bandsaw. Very cool!
Very cool idea and I really appreciate you sharing your thought process, including the problems. I had a thought on the tighter radius issue but it's hard to put in words, but I'll try. Make the nose a circle, like 1 inch or less but in 3 layers. First layer has a half inch beam back to the body. Layers 2 and 3 are just the circle with an 1/8 inch W by 1/4 inch D in them. Use a 1/8 inch by 1/2" tall rib that is glued into the slot in the circles and across the bridge to the body. Under this template you can do your stack method with the other templates or just take an off cut off the same size stock you are cutting with a washer on top
Smart idea with utilizing the free space above the top surface of the top piece to add the beam for rigidity
Good idea. I am also finding my new laser to be invaluable in the workshop. So easy to make extremely accurate jigs. Though a 4" lens would probably allow you to cut the wood on the laser.
Bandsaw bushing, nice!
Thought about your radius/strength issue, maybe you could use a screw hook off the end of a thicker strip of wood to allow you to project into tighter radii? Or if the idea of metal that close seems dangerous, the same approach with a few stacked/glued plastic washers?
Dude, you're a freaking genius. That's why I follow you lol. Where was this at last night. I was routing some pieces for with a curve to them and the router kept kicking back cuz I had to much material I guess. But this would have helped in the bandsaw portion of the process. Ill be buying a set or two.
Nice video of the prototyping process. I've been using very similar trimming jigs(albeit much beefier)for the best part of 10 years now,roughing out rifle stocks blanks
A few things to note, this type of jig is harsh on the bandsaw blades as the radius tightens.
Also if the workpiece allows you to over hang its ends with an extended template it will make a much cleaner cut as it enters and exits the work piece.
Looks like a good candidate for an aluminum jig that’s just a thin arm extending from the spacers
Let’s call it nine inches, I’ve said those exact same words johnathan!
very cool idea Jonathan ! Think I'm gonna be on your shop again soon :P
Very smart
Super genius bro 🙌🏻🙌🏻🙌🏻🪵
Genius
Sometimes I think you are the Einstein of the woodworking world.
Billiant!
This is really cool!!!!!!! I think when I make my jigs, I'm going to try using some 1/4 inch plexiglass. If that isn't strong enough, I'll go to 1/2 inch plexiglass, but I really don't see why the 1/4 inch wouldn't work. GREAT VIDEO Jonathan!!!!
that's a great idea! I always end up flush-trimming WAY too much material cause I'm afraid of hitting my templates
Love the idea. I get the thought of making it reversable for more options and the flat side for more stock cut off room. Why not combine both and every piece has a flat side and a unique guide/offset? One of the could also be just the part behind the blade, allowing for tighter curves. Obviously not foolproof as the others, but at that point but still provides a point of leverage and support as you guide.
Think I will try some this weekend!
You just know the Woodpecker's guys are geeking out on this, coming up with their next One Time Tool. But theirs will be billet aluminum, anodized red, 450 positions, 4 different scales, 8 stops, and 4 micro-adjusters. AND.... just dysfunctional enough so you have to buy their small, medium, and large version at $249.99 a piece with $75 in shipping. (plus $12 per RackIt).
If you flip the work piece over and only use one layer of the template you could do any overhang size and thickness of material. Assuming the template is greater or equal thickness to the jig.
Really cool. If you put the template on the bottom you would never have to adjust it for thickness, but you wouldn’t be able to see what you were doing and it might be unstable. Just a thought I had while watching the video.
I think the straight thin cut side could use more area for the work piece to slide against. The profile side could use smaller radii. The jig out of aluminum or steel would prob work better with a smaller radius profile side. Awesome idea and I can see how useful it could be.
Really brilliant idea, Jonathan! Fantastic work!!! 😃
If there was a way to set the height as well, maybe screwing something... That would be fantastic!
Anyway, stay safe there with your family! 🖖😊
Boo Ya, super great cutting guide.
Cool
Absolutely brilliant as always! A couple small mods and it can be a game changer. I’m going to make (or buy) and use it to cut 1/8” strips for wood bending. Using a table saw to cut 1/8” is sketchy so this will allow me to crank out thin strips or use for edge banding. Keep up the great work and enjoyed your guest appearance on Bourbon Moth. Hysterical 🤣😂😆
Fking hell. What a heck of an idea Jonathan! Well done!
Great idea I'm going to order me some soune
That is amazing!!! How about 3D printing these with a thinner tip for tighter curves?
I think a lot of guitar builders will find this useful!
Do the opposite place template on the bottom under your piece. And make a "guide bushing" around the blade like on a router. I guess as part of an insert
Th
In the background the table saw multi-function sled is sitting there - suggestion for a future jig video project...a mini-version of the multi-function sled adapted for the bandsaw with various thing that can attach to do cool stuff like tapers, V-block for round stuff, rip logs, crosscut, circles? arcs? Can it all be done with one sled?
Newsletter gang rise up!
hahahaha. Newsletter gang gets the early bird special before I've put in the description and added links