Bodyshop disaster - Porsche 718 Cayman Detailing, paint correction and Ceramic Coating
Вставка
- Опубліковано 20 лют 2024
- Join us on the journey to restore this Porsche back to it's full potential - The Transformation is huge on this one.
timestamps:
Intro - 0:45
Exterior Clean - 1:54
Interior Clean - 8:45
Paint correction - 11:15
Bodyshop nightmare - 17:10
Wheels clean and ceramic coating - 25:32
Refinement - 27:30
Glass and Paint ceramic coating - 28:44
Finished clips - 31:28
This lovely Porsche Cayman 718 had been to a local Bodyshop for some minor repairs and unfortunately had been left in a really poor condition. The painted areas had very deep sanding marks and holograms from poor polishing, the replacement panel had barely any paint (less than 90 Microns!) and the rest of the car was covered in the standard swirl marks and minor scratching in keeping with regular use!
over the course of about 35 hours of work this car has been restored to an as new condition, how Porsche intended it to look.
As per always, the videos and filmed and edited by us and take considerable time - If you enjoy this kind of content, you can support our channel by simply subscribing, giving this video a like, leaving a comment and sharing with a friend!
Total hours spent on this project was around 40 man hours.
If you have any questions, please leave them below and I'll answer them
If you are after this type of service on your own car, we welcome you to get in touch with your detailing & Paint Protection Film requirements.
🌐 - www.ontrackdetailing.co.uk
📧 - info@ontrackdetailing.co.uk
☎️ - 0118 229 0660
🏠 - Lakeside Retreat, New Mill Road, Wokingham, Berkshire, RG40 4QT
✅ SunTek PPF Certified
✅ ProFilm PPF Certified
✅ Labocosmetica Accredited
✅ Infinity Wax Studio Accredited
✅ 5⭐️ AlloyGator Wheel Kerbing Protection
✅ Fully Insured including Road Risk
✅ Custom care guides, USB with pics, and full aftercare support included
✅ 5⭐️Reviewed
#detailing
#porsche
#ceramiccoating
#behindthescenes
#detailinguk
#detail - Авто та транспорт
Thanks for a top job guys, my car now looks outstanding 😎👍
👍 Thank you so much mate, hope you enjoyed!!
Fantastic detail and an excellent video.........great work, chaps!
Thanks Paul, it means a lot you watch all the content ! Appreciate your support
Love the production and style of video! tempted to give it a go ourselves 👌🏼 great work as always jay!
Thanks for the support guys!
It would be epic to see a BTS from you guys, covering the install, wiring, design and build as that is something you guys do brilliantly but the magic isn't shown !
Just takes forever to film and edit 😂👍🏽
@@OnTrackDetailing we got a fair few of these on our channel already mate, like you say though, a lot of time filming & editing so perhaps we only do 1 a month of these type of videos 😂
Excellent work Jay 👍🏽
Thanks Bobby, hope all is well with you Brother
Lovely craftsmanship
Hi Graham, thanks for checking it. Appreciate the comments, hope you enjoyed the video 🙏🏽
Excellent result 👏
Thanks mate!!
First watch, really enjoyed this so thanks for the time and effort that goes into filming the process. I am similarly minded to yourself, though just a sideline for myself.. I enjoy much of the same equipment, cutting and finishing pads as you've used here
Couple of general ideas / comments that I had as I watched.. I'd hope for similar comments if I was ever brave enough to film my process!!!;
- hydrophobic spray and rinse is definitely a time saver and is removed from the paintwork through polishing, but not on the plastic trim and glass, unless polishing it too. Worth considering as it can impact the bonding of the coating IF the panel wipe doesn't strip it entirely.
- this was unlikely to be your normal process but assume for the other 3 wheels the pre-wash (or APC for the arches) or snow foam were applied to help get the crud off the wheels before making contact.
- quite plush towels for ceramic coating initial wipe! I typically go for 300-350gsm and then use a 500gsm for the final wipe, I find the lower GSM (still high quality, edgeless) give better initial bite and are more cost effective!
Really interested to hear your thoughts on veritas as a panel wipe.. tried many, tend to stick with Eraser or Gtech but not tried Labo's.
Hello, thanks for watching and glad you enjoyed
The spray and rinse coating isn't super durable, trims are polished anyway, and IPA wipedown removes it , been doing it this way for many years and not had any durability issues, although you are totally correct in theory
Yes all the other arches etc were APC/Snow foam - the rest were cleaned off the car so the usual rinse, and decon process was carried out
Our coating is kind of on the thick side so having a thicker towel helps, and I have found with low GSM towels (eg costco) can scratch paint, and I really get upset having to polish again 🙂
This is personal preference though, so that's up to you
Likewise for panel wipe, its personal preference I really like carpro eraser but I find the Labo stuff more versatile, it also is great for removing any high spots or odd touch up paint etc
Another great job! Love the video as always 😘
Definitely given me the motivation to get mine looking good soon!
Thanks Dan! You should do it and make it into a video too, hehe !
@@OnTrackDetailing I might have to! I'm definitely looking forward to getting it looking good. So many swirls!