Motorola Moto E 2020 / Moto E7 Disassembly Teardown Repair Video Review
Вставка
- Опубліковано 7 вер 2024
- Motorola Moto E 2020 / Moto E7 Disassembly Teardown Repair Video Review
Twitter: / pbkreviews
Instagram: / pbkreviews
Patreon: / pbkreviews
TikTok: / pbkreviews
Smartphone Tool Set: amzn.to/3P8yZuD
Smartphone Tool Set Deluxe: amzn.to/3qLq3AU
Home Tool Set: amzn.to/43ZmSUV
Other Tool Sets: amzn.to/43VzDQg
iFixit Isopropyl: www.ifixit.com...
Smallest Smartphone Thermal Camera: www.amazon.com... (use code PBKreviews for $20 off.)
Crypto Hardware Wallets: shop.secuxtech...
Adhesive: amzn.to/2XAvFga
300LSE Adhesive: amzn.to/3pSu40W
Heat Gun: amzn.to/2SOkS0x
Pry Picks: amzn.to/3YbBi0Q
Other Replacement Parts: www.etradesupp...?acc=c5ab0bc60ac7929182aadd08703f1ec6
Charger port wasn't working. This video was very helpful! I took the speaker board out and found a bent pin. I bent it back and reassembled it. Works great!
Glad it was of help :)
If I just want to replace the battery, can I accomplish that after only removing the back cover, or, do I need to do all the other steps (such as removing the top, and bottom, of the internal phone parts as show in this video)?
You would need to also remove the top cover to gain access to disconnecting the battery cable. But you don't need to remove the main board etc.
@@PBKreviews I could not get that top cover to come off. It was stick at the top, in the center. I tried several times, and it looked like that board was going to break.So I stopped. In your video that top part of the board seemed to come off very easily!
So, I lifted that top board as much as I could with a wedge, at the bottom, where the battery cable snaps in, and eventually got the battery cable to snap onto the board where it clicks in place. That battery clip is SO SMALL. like an 1/8 inch by 1/8 inch, and can't hardly tell that it does snap on the board.
tks for your video.
Amazing. Would love to see a slower reassemble💖🥰💖🥰💖
Put the video in slow motion and pause when needed...
@@mikeblaz or...here me out....do everything you just did to get it apart...only...backwards 😳😳😳
@@SilverMusicAndGaming Not sure why you're responding to me. The other guy said he would like to see a slower reassemble and I told him to put the video in slow motion or pause when needed. I had no problem. Some people forget how they took things apart so they can't just do things backwards.
@@mikeblaz just a joke brutha man
Replacing the charging port should be pretty straight forward then? No soldering ? Also, is there a specific type of adhesive one should apply when putting back together?
Very good very professional thank you for this video
Thank you, and you're welcome.
Really well explained and demonstrated. Thank you .!!
You're welcome :)
Excellent Video..Thank You
Thanks and you're welcome
the power button flex under the screen going in the frame to the motherboard ? how do you replace that ? its not worth it to work on it but my friend need the info in his phone and the power button is broken. thank you for the great videos
Once I remove the plastic cover on the back can I just pop out the battery and exchange it for a new one? Thanks
Hi, you would first have to remove the screws and top cover to disconnect the battery cable, then use a hair dryer or heat gun to gently heat up the front of the phone where the screen is so you loosen up the adhesive underneath the battery holding the battery down, then use a pry tool to gently pry the battery off without warping it too much or piercing it so you don't risk it catching fire or shorting etc.
@@PBKreviews isn't there a danger of the battery exploding if I heat it up too much?
@@peteruveges1976 Not exploding but catching fire or so forth yes, but that's why you heat the front of the phone where the screen is so the heat warms the adhesive under the battery and not directly heat the battery itself. Also you need to heat it gradually not hold heat in one area for long periods. Point is to gradually warm up the adhesive and loosen it a bit.
Excellent informative video which displays your expert knowledge and experience with phone repairs. On a side note, this is the last (temporary) Motorola phone I'll ever buy. Was working fine, battery just died out of nowhere, and this is waaaaaay too much work to replace a battery on a $100 phone. I'll just go buy a new/different branded phone, probably Samsung or One Plus 8. 👍💪✨🌟🙌
Thank you
Hello PBKreviews. I plan on taking the memory chip out of my Moto E7 to retrieve data from it because it's not starting up properly. Do you think this would work and would you know what kind of reader I could use to read the Chip once removed?
If you are referring to the onboard storage, its not removable. Its soldered to the main board and would require soldering skills to be able to remove it and not damage it and you would need to solder it to another working board by replacing its storage ROM chip with your's. It's just not practical nor end user doable.
@@PBKreviews Thank you for the helpful reply. Would you know another way that I could retrieve the Data from my Moto E?
This was a bad Idea. All I needed to change was my charge port. Now my phone won't read the sim card. Sim Card works in another phone so definitely something wrong with the replacement board. Tried all kinds of fixes from youtubers and nothing. Re-installed the old board and phone reads sim card fine. Bought the charge card from Nufix and will not bother trying to work this out with them and suggest you think twice about ordering from them. May try another board form some else or just unsoldering the old micro usb port and soldering in the one from the "new" board. Total waste of time for such a simple fix.
Hi! Do I have to disassemble everything to replace front screen glass and lcd? Or do I just heat the front glue and replace it from the front of the phone?
Yes you would need to take the entire phone apart to be able to remove the battery and disconnect the screen cable from the main board. Then you would pry the screen off the frame and apply your new screen and re-assemble the phone.
anybody !!!!!
Amazing, reassembled...and it powers on! I’m much more comfortable inside a pc tax case 😂 well done sir.
Thank you :)
My SIM card slot won't open at all. I don't have the original tool and I'm worried about pushing any harder.
Nice Informative video.
that was great thank you
You're welcome
Do I have to disassemble the entire phone to fix battery port prongs that are bent/broken? Can I hotwire the device somehow?
not sure what you mean by battery port prongs
this video is very helpful but I don't have the proper tools to heat my phone to get the back off. I got water inside my phone and I was trying to disassemble to put in rice
still going to put in rice but I haven't disassembled yet
Wow.. amazingly well done and informative.
Thanks!
Thanks
You're welcome
Great video. I was looking for the internal antennae. I have a little booster I want to try on this phone. But I do not see where to put it.
Do you or anyone else think a booster would help with particular model of phone? Thanks to you and everyone. Jesus bless.
Nice
Where do I get the adhesive to put the back cover back on does it come pre made for the phone or what I really need to know where to get the right adhesive for the back cover I'd really appreciate it thanks
Hi, usually for most phones after a certain amount of time from release, the pre cut adhesives start showing up on markets for purchase like ebay etc. But you can check mobiledefenders.com I think they have the oem original pre cut adhesive made for this phone.
I put the phone all back together and powered it up and I wasn't getting any internet and Bluetooth wasn't working and I found out that fingers oil was on the pins and how would I clean them
I use achol or electronic cleaner
You can use isopropyl alcohol
@@PBKreviews just did that and I have to reset my settings on WiFi and Bluetooth
Can I put a sim card from my old phone onto my moto e (XT2052DL) phone
I did everything as you said in your vedio but my phone started getting hot why is this
What was the reason you took it apart in the first place?
@@PBKreviews I took it a lose because my screen and led light bar went out so I bought anew one . And followed every thing you did and the phone came on and the went out then started to get hot .
👍👍👍👍👍👍👍👍👍👏 Awesome
👍
Very good video, I have to replace the screen on this phone and I can't find the parts, any way you can help me with that?
Thank you. www.mobiledefenders.com/mobile-parts/motorola/e-series/e-xt2052.html
i got butter in my ear speaker and in my bottom speaker ...how do i clear them up without taking it apart they are barleyt working
You would probably have to take it apart and replace the filters. Most likely the filters are clogged. You can try using a toothbrush to try and clean out the filters but if it doesn't help then your best bet would be to replace them.
Please tear down moto one fusion and moto one fusion +
Will do the fusion+ soon
@@PBKreviews waiting for fusion plus tear down :)
geeze i never knew screwing with a battery would cause it to ca5ch fire...🙄
In this phone ,can you change the glass of the screen still working?
You would need to replace the entire screen with glass as one piece.
@@PBKreviews thank you and thank's for sharing with us your content, have a nice day man.
Do you know where the test points are for this device?
If you mean the test ports they use at the manufacture to connect to their computers etc. I circled them in this photo at this link : ibb.co/7ksfJ28
Yea my battery exploded that was not good...
when prying it off or it just did it on its own?
@@PBKreviews I shouldn't have said exploded, battery cracked and set fire/sparked a bit. I tried to heat screen side with hair dryer prior to trying to get it out, but i don't think i heated long enough/properly. I thought I had loosened the adhesive enough to try pry out battery, but heard battery crack while trying to extract. A little scary at first, put a little cloth over battery to reduce sparks/smoke spread, put in a box and put it outside after about 30 seconds of fire/sparking to reduce smoke/smell inside.
I would recommend noobs like me try extract battery outside if they have a backyard available/extension cord for heating device to prevent inside smoke issue, and try watch someone extract a glued motorola battery before attempting on their own (which i didnt do), because that seems like the biggest risk of breaking phone doing this teardown on your own with less than great tools available.
I was trying to do a screen replacement on my own, so that failed. Cost of buying device is still cheaper than paying for certified repair/paying motorola mail in repair. I just bought same device online, so if i crack the screen again, will be repeating this process lol. Thanks for the video was immensely helpful until i screwed it up! lol
I have that same phone but my screen it's smashed so yeah I have to order a new screen and do all that
You can get original parts for it on mobiledefenders.com
@@PBKreviews screen got worse I don't have the money right now
Moto E7 or E7 plus?
when I am able to get my hands on one, will do it.
@@PBKreviews actually when I saw the title (just mentioned only Moto E) suddenly I thought I was in old times, thinking about Moto E1.
@@nevilsebastian7419 its the Moto E 2020
Where is the GPS chip reciever?
Not sure where its located.
is the back meant to be removed?
It's not a easy removable back like back in the days, its held down with adhesive. But if you need to do repairs, You need to remove it.
My phone drop and can the screen come off or no
The screen is held down with adhesive, it wouldn't fall off on it's own unless you pried it off or if it has been replaced and the person replacing it didn't use enough adhesive etc.
@@PBKreviews tysm☺️
@@queenredmondiaz7775 You're welcome
İ have that phone ,😂😂😂😂
NOT happy, my Moto E 2020 sustained water damage and started going crazy flashing the screen and flashlight, vibrating and making weird noises and I could not shut it off. I managed to pry the back off with a knife but can't even disconnect the battery since it's hidden under that plastic cover with a bunch of screws that I can't even access. Horrid design
I managed to break and pry part of that plastic cover back allowing me to disconnect the battery. Absolutely horrible, the phone at this point was starting to emit strange odors that were making my head hurt when I was near it and I suspect was seriously short circuited. On my old E5 I can literally take the back cover off and easily remove the battery no issue.
I've had friends drop their iPhone XS's, etc. in the sink and never had any issue, meanwhile doing it with this phone results in it destroying itself with no way to turn it off easily
@@kimcelarmycx229 this phone isnt water resistant like the iphones. You're comparing a $1000 phone to a phone that's 1/4 the price lol. Yea it sucks its not accessible without tools, but almost all phones now a days are that way. Also keep in mind that plastic cover has antenna lines drawn through them so breaking or damaging that can also cause reception issues. If you need replacement parts you can check on mobiledefenders.com but aside from that, if you're smelling wierd stuff and there are shorts, you're better off getting a new phone.
@@PBKreviews thanks for the reply, today I used the correct tools to properly remove the plastic cover and reattached the battery and the phone powered up normally and everything seemed to work fine however the screen has spots and streaks from the water damage. I may take my chances and replace the screen and the plastic cover containing the antennas if it's available as now that it's dried off everything else seems to work normally
from jerry
Video
Do Samsung Galaxy M21 Disassembly Teardown video next please
M21 should be pretty similar to the M31 video we already did, I don't think it will differ from it.
So many liquid-damage indicators... Wouldn't it be cheaper to just make the phone WATERPROOF instead? :-)
Stickers are cheap :) would cost a lot more to make the phone more water resistant and to pay to have the phone certified for IP rating etc.
@@PBKreviews I hear you :) Hey, how about making a video about disassembling hard to disassemble things? Everybody would be really impressed 😁
@@TaskSwitcherify hmm not sure what things would be interesting. I've disassembled many things aside from phones but not sure what would be difficult and interesting for people to watch. I've done variations like gaming consoles and such as well from time to time but yep will think about what else would be interesting to do. 👍
@@PBKreviews Safes, missiles, X-ray machines, some hard to find unusual things :-)
@@TaskSwitcherify haha
this battery is bullshit
Bhej do bhai
Wifi ic ki photo bhej
not sure what you are asking
Motherboard me wifi ic ki photo bhej do bhai