DIY Jon Boat Build FINAL WALK THROUGH (Top Gun Jon Boat)
Вставка
- Опубліковано 14 жов 2024
- Below are links to almost everything used in the build. I only link actual products I personally used, not things I recommend or think would work. Hope this helps, scroll down for video description and more info!
Newport Vessels 55pd Electric Motor:
amzn.to/2pgfFBv
Boat Buckle Transom Straps:
amzn.to/2plC40h
LED Navigation Lights used:
amzn.to/2WPjXvT
Shoreline Marine LED Courtesy Lights:
amzn.to/2YM2pRS
LED Light Strips used:
amzn.to/2EZ5QwU
Strip Light Mounting Clips:
amzn.to/2YNCYiR
Attwood Tsunami 800 GPH Livewell Fill:
amzn.to/2YEMlBh
Attwood 500 GPH Recirc. Pump/Kit:
amzn.to/2YGQW5U
Amarine 1100 gph bilge pump:
amzn.to/2JGSJ6H
3/4 Inch Aerator Screen:
amzn.to/2Hw9XST
3M Marine 5200 Adhesive Sealant:
amzn.to/2WnoPeo
Heat Shrink Tubing w/ Adhesive:
(THE BEST STUFF IVE USED THUS FAR!)
amzn.to/2M4yB1a
3 Gang Rocker Switch/ USB Voltmeter Combo:
(3 PIN!)
amzn.to/2QoRSZU
3 Pin Rocker Switches:
(3 PINS SIMPLIFY PROCESS MUCH MORE THAN 5 PIN)
amzn.to/2Wq0BQP
MinuteMan 3
Selectable Livewell Timer Switch:
amzn.to/2Wk9hIn
Carbon Fiber Vinyl Used:
amzn.to/2HqpcN4
Blue Sea Systems Fuse Box:
amzn.to/2YIkEr2
Battery Kill Switch used:
amzn.to/2WwBQhI
Dielectric Grease used:
amzn.to/2XDQJ3p
Rod Straps:
amzn.to/2zQOMWO
Apexstone 10 lbs Gas Struts used:
amzn.to/2LHIC4i
Apexstone 22.5 lbs Gas Struts used:
amzn.to/2JjDwJt
Robert's Indoor/Outdoor Carpet Adhesive:
amzn.to/2vXPKyU
Alumahawk Boat Paint (Colors in Gallons and Quarts):
amzn.to/2VjKP5n
Alumahawk Boat Paint (Aluminum Gray used in video, Quart):
amzn.to/2vVMVOv
Flush Pull Slam Latches used:
amzn.to/2F3acDh
Bondo Putty used:
amzn.to/30qCNvf
Heat Gun used:
amzn.to/2JWZuSf
Above are products used in this video/build! Full disclosure- by purchasing any of these products I receive a very small commission. Link affiliated purchases are a great way to help support my growing channel! All proceeds go directly back into future content and the expenses thereof. I GREATLY APPRECIATE YOUR SUPPORT
Welcome to the FINAL WALK THROUGH video of the #topgunjonboat ! The boat is a #jonboattobassboat (ish) style heavily modified and detailed build. I hope you enjoy!
I do a full walk thru demo of the finished project. I'll show you the ins and outs of the casting deck, all the hatches, the storage, livewell, and dual motor set ups!
As always... if you like what you see and would like to see more, the biggest thing you can do to support my channel and future content is to kindly subscribe!
Also for more content check me on Instagram: ADUBJONES
MAY YOUR TINY BOAT BUILDS BE GREAT!!!
Please check out the following sites of those who helped support the journey:
gunningandscal...
tbnation-shirt...
This is the Tesla of jon boats well done
Thanks man, I'm definitely happy with it! Always room for improvement though.
Dude one of the aluminum boat manufacturers should hire you as a boat designer because this boat is off the hook!!
Thanks so much! Who knows where things will go for me!
Sick build...
Between you and Tiny Boat Nation you guys inspired my 12 ft boat. A little over a year and I'm finally done.
Getting ready to post the videos on my UA-cam channel.
Thanks for all the hard work and inspiration!
That light bar setup is very clever
Thanks!
You're BRILLIANT THAT'S SOOOO MUCH MORE THAN LARGER BASS BOATS OFFER.... SOMEONE WITH THE MONEY SHOULD BE SMART ENOUGH TO INVEST IN Jon boats built that way and sold
..if I had the money i would!!!
Keep up the AWESOME WORK
SGT.MAJOR WILLIAMS
I have to say you have done a tremendous job.Two thumbs up perry in thailand😊
Honestly there's no words that describes the amount of dedication and all the careful calculations you put into this build. I will definitely be watching your videos to get some inspiration for my 14ft Alumacraft jon boat. BRAVO!
Everything about this is awesome. The precision & detail is the best I’ve seen. Extra points for being a DAWG and throwing Cherry Coke in the cooler.
Thanks man! Appreciate it! Can't make it through a day on the water w out a Cherry Coke !
Love the compartment with the led light bar idea
Man this boat is sweet from the paint job to the led lights and everything is real clean i can tell this took some time to complete congrats.
Yeah man , a lot of time! I appreciate it brother!
You are amazing with what you can do with your boats. I am glad I found your channel.
Thanks man! I greatly appreciate it!
SOOOO much time & thought put into this build & your "fit n finish". Super nice, good job..
One of the best Jon Boat builds I’ve seen. Very thought out; well done 👍
Appreciate it!!!
I love your attention to detail. Fantastic job, man! I just got my first used jon boat and am going to fix her up. I hope it turns out that beautiful. Then maybe I will get some compliments at Lake Hartwell!
Very nice tiny boat! Definitely got some ideas for my re-decking. I know I won’t go into this much detail, but I definitely can appreciate what you did here.
Thanks! I have a framing walk through video that may help. My new build will be 1/16 aluminum for an ultra light weight performance boat , but framing on that is a few months away.
Very tight boat brother. Quality workmanship and accessories.
Greatly appreciate it brother!
well done Anthony!!
Top notch top gun build for sure!! Sweetest 14 footer I've ever seen.
THANKS MAN
Wow, that's a clean build! Awesome job! So nice I'd be hesitant to take it out and get that carpet muddy
Yeah she doesn't get used as much as I'd like but I do try to keep her somewhat clean lol
Came here for the 6th Sense sack reviews, subbed for the pimped out Jon boat!! That thing is killer!!
Very nice sir ! I'm redoing a fiberglass boat, might use some of your ideas. Thank you for the links also. I like the looks of the carbon fiber.
For backing down unlit areas, mount reverse lights on the trailer, tie them to reverse lights on the tow vehicle. Makes a world of difference. Also helps in parking lots, let's people know what your doing.
Subscribed !!
Quality build mate. Very well done.. that light bar up the front is next level.. looking forward to the rest of the build videos on your smaller boat. Shout out from Australia
Absolutely amazing,you should be proud of that work.
GREAT job!!! I love it.............now please post video of it on the water. I am going to use some of these techniques on my boat. Thanks for sharing.
What do you mean? Like a video of me on the water in the boat? In my "Amazing DIY Jon Boat Restoration " video theres a lot of footage of it on the water . Lots of pics and mini videos of it on the water on my Instagram. I will be doing a walk through video of it on the water if that's what you mean, although I fear it won't be much different from this video.
Very nice work. Look excellent. Thank you for sharing.
Very impressive build
Thank you!!!
Thinking out loud here.... I would recommend using red curtesy lighting. It will preserve your night vision. Perhaps use LED lighting that you can switch to any color...even white if you needed it in a tight situation. I think they even have a remote which would allow you to switch lighting from anywhere near or on the boat. Easy for me to say, haha.
Excellent build man. Top notch skills.
Thanks brother!
All great ideas! Awesome build with lots of detail. What was the final tab on the build? Every nut and bolt.
I want you to know that you inspire me to start my own jon boat build, if you don't mind, it will look just like yours but without the decals, i like camo for the paint job. but the deck and everything else will be just like yours... that is a nice setup, i loved it.. great job man
I can’t even begin to show how jealous I am about this boat.
beautiful boat!
Nice boat. Definitely will be fun to fish out of
It definitely is man! Always room for improvement though!
damn this is the coolest boat! great work thanks for the tour and video
Thank you👊
Beautiful boat!
Much appreciated!!!
How do you say awesome on the next level! You are an inspiration to many! I hope my future build is a 1/3 nice as your boat brother!
Impressive build.
That thing is slick!!! You do a great job!!
This is a really nice boat 👍🏽👍🏽
Tha boat is amazing man!! I can’t wait to see how the new boat develops!!
Thanks cuzin, I'll be getting back into the new boat after the holidays!
Well done man , great start of a buisness
Thank u
Amazing setup
Thanks man👊
Very nice DIY project
Thanks man!!!
You did a good job. I had a boat just like that
How is your day? Thank you for the video!
It was great! Thanks for watching!
Good job Anthony!
Thanks man! Hope a is well with you , Merry Christmas to you and your family.
@@AnthonyJonesBrigadeBoats merry Christmas to you also!
Nice work love it
Thanks!!
wonderful job......congratulations
Sweet boat great job.
That all looks awesome. One question. Those rear tackle hatches. Why mount the hatch cover backwards? I'd think it would be awkward having a door you have to reach over while grabbing a tackle box.
They couldn't flip the opposite way due to the molded in pole holders, the rear bilge exit pipe, and the transom mount corner braces. It looks awkward but when your in the boat your reaching in from the middle, not over the hatch, if that makes any sense.
@@AnthonyJonesBrigadeBoats Thanks for writing back, Anthony. Now it makes sense. Merry Christmas to you and yours. :)
@@scvic2006 Merry Christmas man!
Hi friend nice boat 👍 I want that one, how much does it cost ? Greetings from New York ✌️👍
Kinda reminds me when my uncle restored my grandpa's boat
Very nice boat, friend. I would like to do something like that to my 1436 Jon boat, but I don't know if adding weight would. sink it
Nah man It won't. Mine came out light fir what it is, western red Cedar is feather light. With 2 batteries full build was roughly 200 pds added. Just add more foam to compensate for the weight added. It won't make it float better but it will keep it afloat longer if it takes any water.
@@AnthonyJonesBrigadeBoats thanks brother, I'll do that
From carbon accent. Did you form them wrap
With Carbon wrap?
Great job !!
Thank you sir!
Where did you get your trailer or is it custom done by you?
Very. Nice !! 👍
I hope mine turns out half as good as this one!!
Question, I see you’re running thinner decking. I’m running 3/8ths and have some pretty big hatches. How does doubling up you’re hatches with additional ply work for you? Does it keep it sturdy when standing on it?
It works ok for me but to avoid headaches I recommend 1/2 inch w runners as well. 3/8 or 15/32 ply gets tricky and if not done properly ad with attention to detail, can flex or warp. With that said, I have had no issues.
@@AnthonyJonesBrigadeBoats thanks for the advice. I may make a 1x3 frame underneath each hatch then.
Parabéns, o barco impressiona em cada detalhe. Este será o modelo para meu novo barco. Você tem o vídeo da montagem?
No mounted trolling motor??
How fast is the boat with the 8HP? I have a 12 foot jon boat witha 5 horse which is a little slow. Great video!
It does 15mph fully built, geared up, with just myself in it.
Where do you get the carpet decals
How do you mount and unmount the motors that you use without damaging the boat? I thought that they screwed in
Perfection!!!
Sup Cuzzin?! So I was hoping you had some suggestions on restoring old boats or maybe a source for parts?! Just won a 87 Ebbtide 170 in an auction for $400.. Trying to restore everything if possible..in addition I have 0 social media..
What up cuzin my cuzin! Man, i get most stuff off Amazon but I will be using products from Alumahawk, Fasco , and SeaDek on my new build I recently started. You need to get on Instagram man, I get the no social media stuff but if it weren't for boats and fishing I wouldn't do Instagram, it can be a great tool. No real way to communicate here but if you get Instagram, your always welcome to DM me there.
Too cool for school dude!
Thanks! Speaking of school, in high school my carpentry teacher forced me out of shop for another elective because I didn't have what it took. I think I eventually figured it out though..
@@AnthonyJonesBrigadeBoats I would say so my friend. Also, even though I'm in Texas, I have been to Anderson So. Carolina and have actually been witness to Lake Hartwell. It is one of the most beautiful lakes I have ever seen.
@@Tripsolo65 Hartwell is a great lake man! I'm very blessed to be in the center of 4 major lakes in Ga I can get to from my house in an hr. Add in all the small electric only reservoirs and we got a ton of water to fish where I'm at!
What Jon boat is that?
Do you customize boats for people if not do you know somebody that will
I like the rear pole light but I can’t find it anywhere. The ones I’m finding don’t look as high of quality
It's a Marine Raider stern light, purchased from Academy Sports
Anthony Jones thanks cousin
How wide is the bottom of the boat ? Is it stable for fishing for more then one ?
36. I think it is stable. Fish 2 men in tournament all the time.
Seems like a huge investment for something that won't handle wind or run over 20 mph.
Runs 15mph , not bad for a full build w an 8hp.
Handle wind? I guess that means me and the other couple million people in the world with jon boats then.
Full build under 2 grand. I couldn't have gotten a better boat anywhere else for the $ than me building this one.
Did you integrate a way to charge the batteries?
I purchased a Noko dual bank on board charger from Amazon after this video and have been extremely happy with it.
@@AnthonyJonesBrigadeBoats thank you for all the information you have provided as well as the videos. I know it is a lot of work to put this together to share with others. Great work!!
When I’m doing a hatch on m6 boat and I want to do hidden hinges how much smaller should I cut my wood to make to fit the hole and hide the hinge
Are you willing to do builds for customers I have a 16ft John boat im wanting to turn to a bass boat.
Not at this time but I believe down the road it will be an option to do client builds.
Bravo bravo 👏
How much do you have into the build?
I do not have an exact amount because I never knew I'd have a UA-cam channel and get asked that so often. So when I started, I was just buying stuff. My new build im keeping a spread sheet for every single purchase to give an exact amount when complete.
To answer your question as a rough guesstimate that I feel is pretty close is 1750-2000 grand max. That's for everything in the boat including motor repairs and new electric motor and 2 batteries and build materials. Keep in mind, the boat was a gift so I'd say if your buying a boat you could build a similar boat yourself for 2500 or less.
How many feet was the John boat? And how much did the build cost?
14 ft, 2 grand
I don't know how I ended up here, but I want it
UA-cam can pull you down some rabbit holes man!
A good place to start one of these projects is with a 14-48. 14 feet long and 48” wide. Hunt to find an old 15hp OMC. These are great motors , weigh 75# and will plane the boat. An 8hp will not plane this boat. This boat is set up up very nicely built but will take a long time to get out and back. Gorgeous boat but it needs to plane.
Functionality first, cosmetics second.
Motor came with it, does fine for me, not buying a new one.
I wouldn't be opposed to a bigger motor but this one came with it, it was low budget build, not worth the investment for me to upgrade motors for a boat I don't get to use as often as I'd like. Maybe one day but honestly I'd go brand new Mercury and if I'm going to spend that I might as well go brand new bass tracker for 10 grand and get a much bigger motor with that. Just how I see it man.
Lastly, lol, I forgot to mention I do go to a river with HP regulations of under 10 but more often times I fish electric only reservoirs. This boat has seen 90% of its usage in electric only lakes to this point. Basically, a lot of reasoning behind this particular set up but I do agree a 15 would be really sweet.
I'm in Augusta could you help me do something like this to my 14 ft?
I'm always for hire! Serious inquiries only!
@@AnthonyJonesBrigadeBoats Do you have an estimate of what you'd charge?
@@zachlawson8758 it can vary depending on the scope of work and how "built" you'd want it. Full paint, wood or aluminum framing, carpet or sea dek, how many electronics, all things to consider which increases material cost and labor.
what size boat is this? would love to do this to my 10ft jon boat.
It's a 14. This was my first boat build, currently building my second build, a 12 footer on my channel.
Anthony Jones just watched all the episodes of the 12ft build going on ! Awesome content!! Makes me want to start mine now . Just not sure a 10ft boat will hold up with the extra added weight of the casting decks and compartments .
What is the length of this boat?
14ft
What’s the cost of something similar if someone wanted to do this?
This boat, probably 3 grand give or take.
Anthony Jones are you doing builds for others yet?
Do you sale it or Do you fix it
It's my boat. I built it for me to use.
Hate to be negative but looks like a nightmare when something starts leaking. Looks good though hope ya catch a bunch.
You can't get to a positive destination on a negative train.
@@AnthonyJonesBrigadeBoatsHa thought we were talking boats... gave 2 positive points at end... check polarity...
@@undeserved1781 True that man! Yeah if I ever have to make a major repair for a leak it wouldn't be fun. What I'm more worried about would be fixing a wiring issue because I'd have to pull the whole boat apart to get to the wiring. Good news is I did spend a lot of time prepping the exterior, doingbody work, heavy paint job , so unless I hit something hard, it shouldn't leak and has not yet after a dozen trips. The wiring, I took my time and heat shrinks all connections with marine grade shrink so hopefully it will be ok! Lastly, the decking and floor system are actually put in in such away to be removed in case of repairs, upgrades, or redesigns. I tried to think ahead there as well! As far as my comment , just something I try to practice! Appreciate you tuning in man!
@@AnthonyJonesBrigadeBoats Was not being critical, I've modified 3 jon boats, 2 -14 footers, the 2nd twice. The last a 16 foot, all aluminum welded the braces and decks, the 16 foot hull is riveted, the deck to bracing riveted. Always wanting more out of limited space. I'm on some rough water from time to time, all the weight and the twisting the hull absorbs causes the hull rivets to loosen. Been fortunate not to hit anything hard enough to damage anything, other than the top starboard corner of the bow. A boat ramp story of it's own. Keep a tight line, nice build, hope it works well.
Классная лодочка, сколько стоит?
Bro can I get you to build my boat ?
My god
I'm pretty sure this was not a budget build
Under 2 grand for everything. I provided the labor of course.
I have a 70's trihull with a reliable evinrude 40 if you want to take on another project, selling obviously.
Too many projects and not enough time! Greatly appreciate it though!
What size boat?
14ft