How To Program A Game Elf {750 in 1}
Вставка
- Опубліковано 26 сер 2024
- Hello, I'm Will and in this video I show you how to program a Game Elf 750 in 1 Multicade PCB. It takes a few steps to do and could be confusing for some so I figured it'd be a great item to go over step by step. At the end of the video I show the manual for this game page by page, but if you like you can follow the link below to download the manual yourself.
Thanks for watching, Please Like & Subscribe for more!
Game Elf Manual:
cdn.shopify.co...
Amazing how a lot of this info isn't in the manual or if it is I can't understand it.
Also important. DO NOT connect power through the Jamma edge connector AND the 4 pin Molex port on the side AT THE SAME TIME. The board can be ruined (this info is in the manual).
Thanks for the vid Will. I WILL be coming back to your instructions once I replace the old Jamma game board with the new Elf 750. I don't have the D, E or F buttons either so have to put them in first.
PS AsteriX, not asterick 🙂.
If p 1 button not working does it need to be programmed with ps2 controller
Is there a way to mirror the screen on games for a 2 player cocktail arcade table? Like Street Fighter, or even X-Men?
Mine is Game Family, with a picture of a cartoon crab, and I don't get the "Press Test Button" message.
Hello, @willsarcadeservice4599. Can you please tell me if Robotron (or Crazy Climber) plays correctly using dual joysticks? In other words, you normally play by using the Player 1 and Player 2 joysticks simultaneously on a 19-in-1 or Multi-Williams. Does the Game Elf support this?
Yes it does, this game has Robotron and requires the use of both joysticks
I have an encoded control panel with USBs coming off the panel. I bought a splitter and hooked it into the USB port on the Blue Elf. I get nothing. Joystick dowsnt respond nor do the buttons. Does that mean i did something wrong or does the Elf not support this? Thoughts?
I'd bet this unit keeps it simple and the USB port is not a hub like on a Mac or Windows PC so one controller would be its limit but, happy to be corrected.
Hi, I have an Elf 412 in one in an arcade machine but they did not install buttons D E or F :(........... is there any way of setting these setting without them? If not, how do I do a factory reset to default? I have changed some of the games to "Hardest" accidentally and cant get them back without the missing buttons! Your help would be greatly appreciated.
Sadly you'd need to have the D, E, & F buttons in order to do a factory reset on the board. The only thing I can say could be done would be to either install D, E, & F buttons on your control panel or at the very least set up some momentary switches to the D, E, & F inputs but keep them on the inside of the cabinet so you can use them for factory reset or at least adjusting the settings for the game.
I have the same question! Did you ever figure this out??
How do you set up momentary switches if you dont mind me asking@@willsarcadeservice4599
Connect a usb controller direct to board
@bryansarracino8623 i connected a ps5 controller to the usb port on mine, square is A, triangle is B, X is C, O Is D, L1 is E and R1 is F. Analog stick for navigation, D-pad doesn't work.
I have one these on a tabletop arcade machine. I believe I have the 750 games one. The games on the machine play absolutely terrible. Buggy, laggy and with serious audio glitches.
What can I do to fix this?
Did you find a fix
Would narc run on this hardware?
After setting one up and actually playing the system I agree with you. It has major flaws and issues that could cause a person to have a heart attack or get grey hair way before they should.
I have a 750 in 1 have a problem with it everytime a game is played at game over the screen does not go to browse it stays on the same game that was played how can I adjust to fix this problem
If I remember correctly you have to press the player 1 and 2 buttons at the same time, then a screen asking you if you'd like to leave the game should appear. Do you have the manual for the game?
I’m sure this is obvious, but I just want to be certain…there’s a particular game that I plan on having it set on single game mode for…will it appear just like the original cabinet would if I set the machine on single mode? Like will it show the small snippet of gameplay or the title screen and play the game’s music before I press the P1 start button? I just want to make sure it behaves like the original game when set on single game mode… thanks in advance!
I never made a video on that topic, but sadly it won't it shows just like you see in the video. I had a customer want to do the same thing and when I tried it it still gives the game list but with only a singular game to choose from.
what size monitor?
This particular monitor is a 19" LCD, I don't remember the Ratio sadly
is there a way to add your own games?
Sadly not for this set up that I'm aware of. You'd want to use a PI System to do that.
I ordered a power supply to play the Mortal Kombat 4 arcade board on, they gave me the Game Elf instead