Focus Mk2 Engine Building 101 - ST/RS
Вставка
- Опубліковано 12 чер 2024
- Focus Mk2 Engine Building 101 - ST/RS
⠀⠀⠀⠀⠀⠀⠀⠀⠀
0:00 Introduction
0:56 Ring Gap Basics
4:16 Crankshaft Installation
11:14 Pistons & Rods
21:23 Sump Installation
24:15 Cylinder Head
33:55 Timing & Belts
⠀⠀⠀⠀⠀⠀⠀⠀⠀
𝙁𝙤𝙧𝙜𝙚𝙙 𝘽𝙪𝙞𝙡𝙙 𝘾𝙤𝙣𝙛𝙞𝙜𝙪𝙧𝙖𝙩𝙤𝙧𝙨 🛒
bit.ly/ForgedBuildEngineRemoved
bit.ly/ForgedBuildInSitu
⠀⠀⠀⠀⠀⠀⠀⠀⠀
This Series has been a long time coming, but here is the 'sort of' balance of the 𝙀𝙣𝙜𝙞𝙣𝙚 𝘽𝙪𝙞𝙡𝙙 𝙎𝙚𝙧𝙞𝙚𝙨 that we started almost a year ago now! 🙏
⠀⠀⠀⠀⠀⠀⠀⠀⠀
Life somewhat overtook us in terms of content, but, we thought it was time to complete the series before Christmas 2020 🎅 Hopefully to cheer you all up in these uncertain times... 🥰
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
We have 𝙏𝙞𝙢𝙚 𝙎𝙩𝙖𝙢𝙥𝙚𝙙 the video for those of you wishing to skip to a certain section... And YES we are going to go into certain aspects in a more '𝙃𝙞𝙜𝙝 𝙋𝙚𝙧𝙛𝙤𝙧𝙢𝙖𝙣𝙘𝙚 𝘼𝙘𝙖𝙙𝙚𝙢𝙮' method. So keep watching the Channel! 🏆
⠀⠀⠀⠀⠀⠀⠀⠀⠀
Thanks to the owner of this beautiful 𝙇𝙞𝙣𝙚𝙧𝙚𝙙 𝘽𝘿 𝙋𝙚𝙧𝙛𝙤𝙧𝙢𝙖𝙣𝙘𝙚 𝘽𝙪𝙞𝙡𝙙 for allowing us to document the process - We do hope you enjoy! 👍
⠀⠀⠀⠀⠀⠀⠀⠀⠀
If you haven't already, then....⠀⠀⠀⠀⠀⠀⠀⠀
Please 𝙎𝙐𝘽𝙎𝘾𝙍𝙄𝘽𝙀📌...
Tap the 𝘽𝙀𝙇𝙇 🔔 𝙄𝘾𝙊𝙉... To stay notified of 𝙉𝙀𝙒 𝘾𝙤𝙣𝙩𝙚𝙣𝙩
Smash that 𝙇𝙄𝙆𝙀 👍 𝘽𝙐𝙏𝙏𝙊𝙉... If you enjoyed the video
And feel free to 𝘾𝙊𝙈𝙈𝙀𝙉𝙏 down below! 💬
⠀⠀⠀⠀⠀⠀⠀⠀⠀
𝘚𝘱𝘦𝘤𝘪𝘢𝘭 𝘛𝘩𝘢𝘯𝘬𝘴, 𝘈𝘴 𝘈𝘭𝘸𝘢𝘺𝘴, 𝘛𝘰:
𝗘𝘃𝗶𝗹 𝗚𝗧 - bit.ly/EvilGT
𝗚𝗖𝗠 (𝗚𝗲𝗼𝗿𝗴𝗲'𝘀 𝗖𝗮𝗿 𝗠𝗲𝗱𝗶𝗮) - bit.ly/GCM-UA-cam
𝗟𝗕𝗧𝗩 𝗢𝗳𝗳𝗶𝗰𝗶𝗮𝗹 𝗥𝗲𝘃𝗶𝗲𝘄 - bit.ly/LBTVReview
𝗠𝗶𝗿𝗿𝗼𝗿 𝗜𝗺𝗮𝗴𝗲 𝗖𝗮𝗿 𝗖𝗮𝗿𝗲 - bit.ly/MirrorImageCC
𝗠𝗶𝗹𝗹𝗲𝗿𝘀 𝗢𝗶𝗹𝘀 - www.millersoils.co.uk/
⠀⠀⠀⠀⠀⠀⠀⠀⠀
𝗬-𝗙𝗼𝗼𝗱 - bit.ly/BDPerformance_YFood - 𝗨𝘀𝗲 𝗗𝗶𝘀𝗰𝗼𝘂𝗻𝘁 𝗖𝗼𝗱𝗲: 'PERFORMANCE10' to Save Money on your Y-Food order 🙏
⠀⠀⠀⠀⠀⠀⠀⠀
Should you be interested in a 𝘊𝘰𝘭𝘭𝘢𝘣𝘰𝘳𝘢𝘵𝘪𝘰𝘯 /𝘔𝘦𝘥𝘪𝘢 𝘌𝘹𝘱𝘰𝘴𝘶𝘳𝘦 for your 𝘊𝘩𝘢𝘯𝘯𝘦𝘭 𝘰𝘳 𝘊𝘰𝘮𝘱𝘢𝘯𝘺 - 𝗣𝗹𝗲𝗮𝘀𝗲 𝗘𝗺𝗮𝗶𝗹 ✉️ media@bdperformance.co.uk
⠀⠀⠀⠀⠀⠀⠀⠀⠀
𝘚𝘵𝘢𝘺 𝘛𝘶𝘯𝘦𝘥 𝘧𝘰𝘳 𝘜𝘱𝘭𝘰𝘢𝘥𝘴 - 𝙈𝙤𝙣𝙙𝙖𝙮, 𝙒𝙚𝙙𝙣𝙚𝙨𝙙𝙖𝙮 𝙖𝙣𝙙 𝙁𝙧𝙞𝙙𝙖𝙮... Some Specials may be loaded outside of our usual schedule! 📺
⠀⠀⠀⠀⠀⠀⠀⠀⠀
𝘾𝙪𝙧𝙧𝙚𝙣𝙩 𝙎𝙪𝙗𝙨𝙘𝙧𝙞𝙗𝙚𝙧 𝘾𝙤𝙪𝙣𝙩 ▶️ 4,260
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
• 📞 01978 758 598
• 🌎 www.bdperformance.co.uk
• ✉️ wrexham@bdperformance.co.uk
• 📦 store.bdperformance.co.uk
⠀⠀⠀⠀⠀⠀⠀⠀⠀
• 👍 BD Performance
• 📷 BDPerformance
• 🎥 / bdperformancewrexham
• 👻 snapchat.com/add/BD-Daz
⠀⠀⠀⠀⠀⠀⠀⠀⠀
#BDPerformance #Revo #EngineBuilding - Авто та транспорт
![+700HP SR20DET Engine Build - Full Start to Finish [4K]](http://i.ytimg.com/vi/TvqgprMMn8g/mqdefault.jpg)
Super informative video guys 😎 love this
Love how organised you guys are, I can tell this ain't your first rodeo 👌
Im busy getting everything ready for my complete rebuild! Thank you for a informative video gents!
Cheers
Very interesting and technical video and very skilled mechanic👍
Thank you so much 😊
Thanks for this Ben
Really enjoyed the build
Welcome 🙏
Excellent tutorial guys thanks for sharing!
Welcome and thanks for the feedback; we really do appreciate it 🙌
Cracking video guy's. Ben is a very knowledge guy and when I decide to get my engine rebuilt I'll be bringing it to you guys...
Thank you 🙏
This is a very good video for some one trying to learn about engines because they go in to a lot of detail about the engine
We have the sleeves to suit each side so we use them; avoids any damaged.
Thanks for the input and for watching 🙌
Great video and tips thankyou
Best video by far thanks guys going be big help today 👍 🙏
Everything great about this video bar the interruption from who ever that is lmao right when your trying to show where to seal lmao 🤣
total Sunday evening good stuff.. you are as gentle as a surgeon with your skill sir (PS I work in the NHS and know care when i see it)
Excellent video, very detailed
Great video, really enjoyed it 👍
A mk3 RS or ST engine rebuild in the future would be good 😁
Great video. Just what i needed to watch.cheers lads👍
Thank you 🙏
Great to watch thanks 👍
Thanks Ben. Really enjoyed that 👍
Great to hear 🙌
Good video lads. Keep them coming.
Thank you. Have a wonderful New Year 🙌
Great video Ben.This engine looks much stronger than the new focus RS. Nice work buddy.
Thanks and for taking the time to comment. Hope you enjoy the other videos 🙌
Really good watch that chap's.
Some great tips too 👍 Subbed
Awesome vid guys. Only recently found the channel and subbed, think its great.
Thank you - we really appreciate all of our subscribers 💙
Hope you continue to enjoy the content 🙏
Thanks a lot for posting this was very helpful
Welcome 🙏
❤️Yea quality vid guys 👍 plz show more of what you do 👍👍👍👍👍
Take a look at some of the other videos of you haven’t already.
Glad you enjoyed the content 🔥
I’ve watched most of your vids more plz 😉😊
Really enjoyed video .Well done
Thank you 🙏
Your videos making me wana do the build myself....
🙌🙌🙌
Very good video guys, top work👌
Thank you sir 🙌
After watching this I feel like with just a few thousands of pounds worth of tools I too could rebuild an engine :)
lol indeed; you’ve hit the nail on the head sir
Great video ,I've seen other people use plasti gauge to check the clearances
That video was amazing make me want to pull my st engine apart lol I won't be doing that tho great stuff guys really enjoyed it.
Excellent video guy.
Thank you 🙏
Really do appreciate the time to comment
Nice one guys, very educative.
Cheers 🍻
Good build there Ben awsome stuff
Great video. As much fun as it is to see you lads dicking about this is the best of your videos I’ve seen so far. 👍
Thank you so much; it’s a fine balance between the different styles! We used to do lots like this but didn’t get the views.
It’s something we will be trying to bring back 🙌
Great video lads
Thank you 🙏
great video guys!! looks easy 😁
Want to do a video with us of Forging your own 😂🤪
@@BDPerformanceWrexham sounds like a plan👍😎
True professional
good stuff Ben
Good informative video.. can’t fault that 👌🏻👌🏻
Glad you enjoyed; hope you’ve watched some of the others too 🙌
@@BDPerformanceWrexham dudes I watch all your videos.. even though I’m not into ST’s.. watch it for the people and the crack.. 👌🏻
@@nurburgringobsessed5722 thank you so much!
Brilliant video really helpful you should do more of these 👍 i have subscribed as well win win.
Thank you 🙏
Made that really easy . I may give mine a little re build 😂😂😂 No chance leave it to you Guys great work
🙌🙌🙌
Great video that
Cheers: glad you enjoyed
With respect to the king bearings, since there was no damage to the journals or crank, guessing you all used standard size? Also do you find that those bearings are within spec for the 3 variation options for the ford/Volvo factory bearing replacements?
I have no idea why I watched that 😅 great video and very interesting 👍
Thank you 🙏
It’s not always about understanding - it’s about appreciating. That’s why we try not to make things too complex and cover the basics.
Thank you again for your support and for watching 💙
Enjoyed this, great content lads
If in doubt, more lube
Glad you enjoyed and hope you continue to watch our content.
Thanks for taking the time to comment 💙
What ring gap size did you use on this particular build/engine? Thanks and great informative video
Good Job from Poland you somtimes close the deck
helemaal top
Superb vid,love the Ben tutorials top bloke 👍🏼 , hope the eyes getting better D, what’s the best forge piston and rod set up I saw the mahle pistons and k1 rods in back ground but I’ve seen the wossner and wiseco piston aswell🤔kudos again guys🙌🏼
Our weapons of choice are MAHLE/K1 for the big builds. Nothing against the Wiseco; just personal preference!
Glad to hear you enjoyed the video and thanks for the awesome comments 💙
The process of sizing piston rings up on original oem items is this because of the block has been hoaned modded and does this apply on st150 2.0 another great video guys 👍🏻👍🏻
Great video , have you ever built a Z28NEL engine 2.8 V6 Turbo ,
Great video I’m thinking of buying an ST225, but worrying if I put what I buy in for a block mod how much would it cost to have this work done if the liners were found to be cracked.
Thanks for this Great Video. Is it possible to tension the tensioner in the wrong direction? In some other Videos they turn the 6mm clockwise and no i am unsure.
That was a great video well in Ben I don’t own a Ford but if I did I would take it to you for a build
Thank you 🙏
Absolute incredible video ive just brought a focus st where the alternator belt has snapped and been taken up buy the cam belt knocking the timing out and causing some damage. This video has boosted my confidence to do a rebuild thank you so much where would you recommend for parts
We can do parts on a supply only- call Kenzi at the office 🙌
Hi guys, been looking for a while but can’t seem to find the right information.
I’m looking to build a 450WHP engine, will the factory oil pump be sufficient or will this need upgrading and if so what would you recommend.
Many thanks and keep up the fantastic work.
This is an awesome video, I'd love to have a go at doing a build one day. Also, would it be possible for you to maybe do a parts comparison video? i.e. forged vs standard pistons and cams ect.
Could do; it would be difficult to see but we may just give it a go.
Thanks for the comment 🙏
@@BDPerformanceWrexham nice one, it would be interesting to see 👍
Would Love to have the money for him to rebuild mine 👌
I really enjoyed this video, great work guys! Also, Is it possible to use with this engine the intake camshaft from a Volvo 2.4i (C30/S40/V50/C70)engine? Will it provide any performance gains?
We generally stick to Newman or similar camshafts when hunting for power. Glad you enjoyed the video and thanks for the comment/question! 🙌
Do you guys do lingered builds for Volvo B5254T7 too?
i want to know what are the tapets clearances for uprated cam shafts like new man cams ive seen there are diffrent tapet sizes
Do the main bearing bolts need to be replaced at a hydb/hydc engine? Equivalent b5254T from volvo. Torq spec's are not clear to me for the little block bolts, 24 and 17nm + 90 degrees? Torque spec camshaft cover is not mentioned?
Hi, so I take it the days of plastigauge for the shell bearings are long gone then.
Hi guys ,what should be healthy 225 engine compression ratio in PSI or bar please 🙏
Could you please assist if I put a dailgauge on my number one piston and turn the engine to tdc mark then my timming mark on my crank does not correspond to the mark on the oil pump so if you use the timming tools the mark alighn with the oil pump but the pistons number one is not full on tdc. Why is that
I have a problem with my st leaking oil from ofh compression test good any ideas
Just watching you put the crank bearings in and wow you haven't soaked them in oil first or is that too much old school lol
hey guys, I've been looking for a service/repair manual for the 2010 Focus RS Mk2, any idea where I can buy one?
What’s ring gap size for big power over 400?
Does anyone know the thread size of the 12 & 5 crank cradle bolts not the main caps ?
Can I put this engine in my 2010 Volvo C70 T5??😊
Hi, im from brazil and have recently rebuilt my engine. I get no leaks or issues with the pcv valve. Also my oil pump is new but im getting something like 0.8bar oil pressure at idle and 3.0 bar at 4000rpm. According to the manual im a bit off the ideal oil pressure.
We checked rod bearings and their clearence is within standards.
What can i check next? Im out of options in my head.
That silicone work 😎😎😎. You could just record that and play it on a loop #AutoASMR 🔥🔥🔥
🔥🔥🔥
Could you guys make a video of this engine starting eventually?
Watch this space; coming to the Channel in the next month or so. We are now about three weeks ahead with filming thankfully!
Block is shimed? Rebuild with new sleeves?
I would of thought that you would of stated clearances before and after ?
How much 518 did you use roughly ? Just £55 a 50ml tube here lol 😆 but obviously need it. Is 100ml a rough estimate of use of more ?
When placing the piston in cylinder You are dipping it in what? Looks like ATF
hi mate can i know to torque specs of the rockercover please.
Great UA-cam channel when you guys opening shop in South Africa?!?!?! Cape Town to be specific.
Hahahaha a little far away for us: we can ship ☝️
i didn't know max branning was a master mechanic lol
This must be the tenth or twentieth comment about our Max B ;)
Do you have to use lube when dropping the piston in or can you also spit on it?🤔😉
Not sure how to answer that question - what you do in your own time is your own business I suppose lol
ben the master builder great video but we all know it was lee's idea to do it that way only joking guys
Quick question how do you install the rear crankshaft seal without damaging it I've got to put new one on my 2007 st cheers
A sleeve or the genuine installation tool from Ford. If you are really struggling you could use the original you removed, over the new seal, to reinstall.
Hope that this helps,
TeamBD
@@BDPerformanceWrexham thanks guys I no these rear seals can be a pain to do 😔
I have a crazy question! Is it possible to fit an ST HYDA 2,5 liters in a Ford Focus Mk2 which has the 1,6L HWDA engine? If yes, what are the difficulties?
Anything is possible with the right amount of parts, money and skill. The question is more of - is it worth the cost? There are a few who have installed HYDA Engines into other models; however the ROI isn't always worth it. against switching out! Hope that this helps, TeamBD
@@BDPerformanceWrexham Indeed... ROI will be most negative. Then perhaps worth building the engine and deciding about the car later?
BTW, I really enjoy your videos. I just discovered your channel couple of days ago.
Bought my st off a dodgy dealer now it looks like i have a cracked piston liner, wish this was my engine you were working on
The main bearings you get 2 that are bigger than the rest in a king bearing set where do these go please as it doesn't show in the video. I don't want to put them in wrong position cheers guys 👍
The block is machined differently for the the thrust bearings, you won’t be able to fit them anywhere else.
I want Ben to do the block mod on my mondeo how long will it take
We recommend you leave the vehicle with us for the day. We then test overnight on an extended road test and you can usually collect the very next morning ;)
Am not planning on mapping mine ect will change the oil every 5k way the millers stuff use sugested. When want go fast will hop on my bike. The boys it spent 10-20k on these a dont get it can geting somthing really nice for at m3 or sothing lol
Would you rebuild a motorcycle engine
Interesting question. I think we would pass; simply because we don’t specialise in anything other than cars.
Thank you for the question and for watching 💙
Lined block with standard rods and pistons....
Yes, many choose this option
Did yous block mod it..
If it’s not Linered, it’s always gets shims so yes sir 👍
Hw much is it to do a rebuild
Prices vary greatly in honesty, from £3995 through to far more, depending on specification etc. Why not take a look at our Engine Configuration tool on store.bdperformance.co.uk
8:28 🤣🤣🤣🤣🤣🤣
Sureley you didn’t put that dirty crank in a nice clean engine?🤔
please invest in a proper ring grinder. doing it by hand never gives a straight edge, i wouldn't be getting an engine built by a company without the proper tools. this is not slagging your company off i find the vids very good just shocked you are filing rings down by hand.
The whole idea of the video was to show the method in which people can adopt at home making sure that the edges are parallel and free from burring.
Thanks for the feedback - the comments are appreciated regardless.
The background music is a major distraction 👎