THX Josh. A Rollo is on my wish list, and when I'm ready to pop for it, will come back and use your link. Meanwhile my printer works fine, but one day will skip the step of all that tape on my labels.
I was going through one ink cartridge every 20 days just printing shipping labels. If you're selling five items a day you definitely need a thermal. Don't need ink and the labels are cheaper it pays for itself in no time
yeah I've been selling on ebay since 99 and always just printed on a hp and scissored them out and package taped them on . i even remember when usps said "do not tape over label" and i was like okay how and what do you want me to attach this ebay generated piece of paper with? spit? went through that for like ten years without an issue and usps finally stopped saying that. now the only occasional issue is fedex seems to like to kick out a package for "shipping delayed - barcode label distorted had to reprint" like they just needed to send out some massive blast mail to say why they weren't going to get 20 million packages to their destination within a week. your video caught my attention through another one so i watched it and it was well made. i would like to have the ease of printing the peel and stick but not for 200 dollars up front. maybe if something comes up for little or no cost i will try it. if i can source the blank label relatively cheaply. T Y
Hairy Tornado can you use it via wifi or Bluetooth?? Using just an iPad or iPhone? I don't have a computer but sell online poshmark mercari vinted and kidizen and the shipping labels from all those sites are sent to my Comcast email I currently have to dive 14 miles to town to the local library to print shipping labels and it's annoying
Lol I’ve been searching forever too and always somehow end falling in love with the rollo. But what would be the perks of getting this vs a regular printer and lamenter for labels? That way I can print my product labels also
Blank shipping labels for use with WorldShip, Internet Shipping and CampusShip. Prints barcodes and/or addresses using a thermal printer.(6,000 per Case)-02774006-4" x 6"
you might want to mention as in my case, not following all the directions, is that if you have been printing from a regular printer and cutting and taping the labels on a size 8x11, you do need to go to the selling platform and change the label size from 8x11 to 4x6, took me a few print failures to figure that out. And, you have to change the sizing before you hit print because it won't change to correct sizing after you hit print, one more thing to remember is to change your printer location depending if you're printing a regular sheet of paper from your regular printer or printing from Rollo. These simple changes got me everytime. Rollo is a great printer, love it, thanks for the demo, Can I insert a blonde joke here?
@@joenwc A blonde woman decides that she is sick and tired of all the blonde jokes and how all blondes are perceived as stupid, so she decides to show her husband that blondes really are smart. While her husband is off at work, she decides that she is going to paint a couple of rooms in the house. The next day, right after her husband leaves for work, she gets down to the task at hand. Her husband arrives home at 5:30 and smells the distinctive smell of paint. He walks into the living room and finds his wife lying on the floor in a pool of sweat. He notices that she is wearing a ski jacket and a fur coat at the same time. He goes over and asks her if she is OK. She replies yes. He asks what she is doing. She replies that she wanted to prove to him that not all blonde women are dumb and she wanted to do it by painting the house. He then asks her why she has a ski jacket over her fur coat. She replies that she was reading the directions on the paint can and they said, "For best results, put on two coats."
For those who is trying to print a label return from amazon, you have to hit shift +command 4 on the mac to select the image to capture the label first, save then print, I couldnt figure it out at first, because you get a label and a upc along with the label , so you have to select the label first, just a fyi, I enjoy my rollo! Thanks for the video!
ANYONE ELSE HAVE THIS PROBLEM? I work with a 501c3 and we ordered this and it came without a power cord.... We called and they said WE would have to find one! I am starting to wonder where the owner of the company ordered it from after watching Josh at Amazon returns store 🤔
Yep. I’ve owned my Rollo for 6 months. Actually ordered and received the free (they overnighted a case) labels from UPS before I even bought the Rollo from Amazon (warranty). I think it was $160 and that was my only cost. Never had a problem with the label or the printer. It’s so fast and quiet. Winner all the way. DYMO is just a machine to get you to buy their overpriced labels.
Just got my Rollo today…$30 less than regular price…Amazon Warehouse “Used-Like New” 😉 Now to start my art/doll/etc. business! Thank you for the info! 🙏
I know i have been leaving lots of comments lately but I'm new and really like the way you conduct yourself. You seem to be so happy with life, your surroundings, and your friends. The past 2 weeks have been really good for me reselling. I'm getting 2 to 5 sales per day. Can build from that. I use many of your suggestions. Thank you for all you do to help. Hope to shake your hand one day as a colleague rather than student.
Been cutting and taping labels for 3 years, just got one these last week. Most labels ever tapped in a morning = 48 If you want it you'll get it the printer don't make the business.
@@HairyTornado nah I'd rather not think about it, this way it's time I didn't need to spend meditating. Plus now I can package any item perfectly. A frequent feedback is wow packaged so neatly. Wouldn't have happened without the investment. I also didn't start watching others until two years in. Was a blessing to learn for myself niches. Appreciate the reply guy 👍 our stores the same size brother.
I just upgraded the Rollo last week. Actually got it at a discount too from Ralli Roots’ discount code. Had I known you were going to have an affiliate link I would’ve more than happy purchased it from you. I wouldn’t of mind buying it full price, I just like to support. Previous to the Rollo I did the two label per sheet method on my ink jet. Gotta say I love it.
I really like the review of the Rollo, Although I would love to have the Dymo, I think that the Rollo is the way to go for a full time seller. I am not there yet but glad that you are willing to really put it out there.
went to my local goodwill outlet today. What an experience! The saddest thing was finding a TI Scientific Calculator but the battery cover had fallen off at some point it was nowhere to be found. Then as I made my way to the register my full shopping cart was only a little over 5 dollars! I think the cashier just guessed as a price since she did not weigh anything. I will be going back!
I want to find a printer to print labels for my products. Does this type printer allow for light grays or "depth" for lack of a better term? My labels have a diagram built in solid works that allows the consumer to see how the product is installed. I'm already printing on peel off labels but like the efficiency of this type printer. Currently print 500-750 labels per month. Should be at 1250 in the next few weeks.
Hey Josh, your videos and social media have been very informative. I have been watching a lot of other people and you seem to be able to answer most of the questions I need answers to. Been on Ebay for years and recently retired and looking for something to do as my boys have left for college. You may have saved my marriage.
I sell on a platform that sends me shipping labels in PDF format. How easy is it to reformat a shipping label from a 8.5x11 size PDF file to fit into this 4x6 size thermal printer? Thanks!
yeah well i have to print uphill both ways barefoot in the snow lol. the rollo looks very slick nice review. i still use my canon inkjet and hasnt failed me yet.
Wholeheartedly agree with the half sheet label option. I did that for a long time before I bought the Rollo (which I LOVE!) Another thing about the Rollo is that if you ship a lot through UPS you can get FREE labels! So your only cost would be the printer itself. Also, they are coming out with a WIFI option and my understanding is that they will give you the hardware to make this one backward compatible on request.
I bought a remanufactured one from amazon. saved about $50. I ship UPS, FedEx, and USPS. I ordered labels from UPS for free. And I will probably get hate of this, but I use them for everything. I am not going to switch out labels for each package. You can if you like. I have been finding that flat rate on UPS is getting better, so I use them more. It is like 4000 fanfold labels or you can get roll labels.
I don't know man, having a thermal printer for an eBay, etsy, et al business is a BIG DEAL. The amount of work and time it saves me is insane. It's the single best investment to an online retail business anyone can make, especially if you use sticky labels, which why wouldn't you? I have a Dymo 4XL. Other than some occasional issues when loading a fresh roll, it's been a great work horse, but this Rollo does intrigue, although it is a little pricey.
I've been using a regular printer, cut/tape...for a long time. But I don't sell enough atm where I'm doing more then 1 maybe 2 a day. (working on listing 10 a day now) But something you didn't mention, is the SIZE & SPACE a regular printer takes up... I have a really nice Brother color printer that I got out of a Storage unit I bought, but it's HUGE! And ink is expensive even on eBay. So there's a lot of advantages to switching to a thermal. Great quick concise review! Thanks ..:)
I’m in Australia and I don’t have a desktop/laptop system I only have my Apple iPhone and iPad devices so I was looking for a wireless/Bluetooth thermal printer to print my labels. I found one that seem to be amazing however to print one label from the time you press print from the app it took 65 seconds for the printer to start printing. And when I contacted the company they said that that was normal. So I quickly returned it because it was 10 times quicker for me to print with my usual printer onto paper and sticky tape it to the parcels as I’m really not sending more than a couple of items per day.
I use a Brother laser jet printer right now. I use the 8 x 11 sheets that have two labels per sheet. I have to cut the sheets in half because when printing through ebay, half the page is like instructions and a receipt so it basically wastes a label. But cutting the sheet in half I am able to use both labels. Hope I made sense. I'm thinking that Rolo printer is the way to go.
There are settings on Ebay to where you can choose not to print all that extra junk at the bottom of the page. I dont know exactly where it is, but it's somewhere haha
I told myself when I sold X amount of $ I would invest in the Rollo. Think of it like this, if you pay $1 for an item and it sells for $10 (roughly $9 profit) and you do that 18 times you've paid $18 for a $162 printer. 18x9=162
I went for the Rollo after seeing Ralli Roots had it, reviews on the Rollo convinced me more than Dymo even though everybody I follow has Dymo. And (knock on wood) it has been great so far. Halfway through the 500 box of labels and love it!
No. You have to have it plugged in to a computer to print. The only thermal label printed that prints from a phone (that I'm aware of) is the one from Brother. But it is also like $100 more expensive than the rollo
I love my rollo. Thermal printers are a real game changer. Great video Josh. I struggled with the paper size at first too. Other then that it was a very easy install
Cover Girl has entered the chat. 👀 lol... No but in all seriousness, the Rollo thermal printer design is the superior design over the Dymo 4XL, and the worst thing about Dymo is that they're price gauging and taking advantage of the huge influx of resellers buying thermal printers and their asking price is ridiculous; also the only printer you ever hear of having issues is the Dymo; not the Rollo. I personally decided to go with Phomemo with my thermal printer purchase. It has the same printer layout/design as the Rollo, and arguably even nicer (in my opinion)! I actually released a video about it as well just a couple of weeks ago! Not sponsored. I love it. It's beautiful piano white & black, and it just works. Best part is, it was CAD$50 cheaper than the Rollo, and CAD$100 cheaper than the friggen Dymo 4XL. 😎👌
It has been brought to my attention that you can order 4x6 thermal labels from UPS for free and they come in a case of 6,000! I just ordered my Rollo printer today, do you know if these labels work in the Rollo printer and can you use them to print labels for USPS labels as well even though they came from UPS?
The free UPS labels are meant for customers that use UPS to ship all of their items. It should be obvious that you UPS doesn't want you using their free labels to ship priority mail through the USPS which is how we ship 95% of our items. We just made a decision that aligned with our morals and ethics to just buy our own labels on Amazon. They are pretty cheap and I feel confident using them to ship with any carrier since we paid for them ourselves.
Has anybody encountered the white line issue that occurs sometimes? I just got a real good deal on a pre-owned one because of the white line issue, I cleaned it with alcohol and it still prints a thin white line.. any idea?
Have had mine for couple weeks now and the only issue I have is the poor quality of the print on Amazon shipping labels (FBA and seller fulfilled). Everything else comes out fine...eBay, UPS, FedEx. Also the free case of 6000 fan fold labels from UPS was enough to last for the rest of my reselling days. Can’t beat that.
@@HairyTornado Yesterday there were several updates not just to Windows but for drivers. I do not know if it was because it was the shut off date for Windows 7 and someone had nothing better to do but sometimes when the drop updates they have bugs and a couple of days later will drop a fix as an update. Like next week your computer could be working perfectly normal. I am not a professional at computers, I have a great IT guy and he helps me but he is the one who has taught me to wait after updates because of fixes coming out days later. I sent you an email also on somethings I have gone through which has improved my internet after having a tech here at least once a month for the last year lol Only way I can get a man into my apartment hahaha. I was also informed by someone who used to work for my provider to once a month unplug my modem and router to stop static build up, which is worst in winter. I don't know about all of these things but it is all preventive things I do and they seem to be working well for me. Keep up the great work you do!! You are making a difference!
Strongly recommend... so we’ll go ahead and skip that 😂😂
Joshify 🤣😂🤣😂🤣😂🤣
Joshify 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
I'm still LOL!!
Hahahhahahaah love it
😂😂😂😂😂😂
Thanks Josh you’re past videos are helping my future store😁you’re the greatest!
Thank you for sharing.
Thanks!
THX Josh. A Rollo is on my wish list, and when I'm ready to pop for it, will come back and use your link. Meanwhile my printer works fine, but one day will skip the step of all that tape on my labels.
I just bought one and LOVE IT!
how does it do printing smaller barcode shipping labels
love your humor!! I wish all review videos were like this
I was going through one ink cartridge every 20 days just printing shipping labels. If you're selling five items a day you definitely need a thermal. Don't need ink and the labels are cheaper it pays for itself in no time
Thanks for your review 😀
The info on the easier way to print things towards the end was super helpful, thanks.
Strongly recommended .... we'll skip that. :) You are killing me. I expect you will one day have over 1 million subs. You are a natural. Keep it up.
Bought my Rollo 6 months ago and it has been rock solid. Love it!
Is it compatible with ecwid
yeah I've been selling on ebay since 99 and always just printed on a hp and scissored them out and package taped them on . i even remember when usps said "do not tape over label" and i was like okay how and what do you want me to attach this ebay generated piece of paper with? spit? went through that for like ten years without an issue and usps finally stopped saying that. now the only occasional issue is fedex seems to like to kick out a package for "shipping delayed - barcode label distorted had to reprint" like they just needed to send out some massive blast mail to say why they weren't going to get 20 million packages to their destination within a week. your video caught my attention through another one so i watched it and it was well made. i would like to have the ease of printing the peel and stick but not for 200 dollars up front. maybe if something comes up for little or no cost i will try it. if i can source the blank label relatively cheaply. T Y
The labels are very cheap
i save the silica gel packs and sometimes use them when i'm shipping out my own stuff - esp clothes if it's humid outside or something.
Great tip!
Hairy Tornado can you use it via wifi or Bluetooth?? Using just an iPad or iPhone?
I don't have a computer but sell online poshmark mercari vinted and kidizen and the shipping labels from all those sites are sent to my Comcast email
I currently have to dive 14 miles to town to the local library to print shipping labels and it's annoying
Rollo really neat have been using it for 8 months. The Best unit to buy. Reliable 100%
Another great video!!
⭐️⭐️⭐️⭐️⭐️
Not sure why I am awake at 3am researching for the 10th time which printer to buy. Lol But going right now and buying this one! Thanks!
Lol I’ve been searching forever too and always somehow end falling in love with the rollo. But what would be the perks of getting this vs a regular printer and lamenter for labels? That way I can print my product labels also
Amen Brother. I LOVE my Rollo.
FYI-You can get a box of 6000 4X6 labels from UPS for FREE (under supply's)(You must make a account)
Blank shipping labels for use with WorldShip, Internet Shipping and CampusShip. Prints barcodes and/or addresses using a thermal printer.(6,000 per Case)-02774006-4" x 6"
you might want to mention as in my case, not following all the directions, is that if you have been printing from a regular printer and cutting and taping the labels on a size 8x11, you do need to go to the selling platform and change the label size from 8x11 to 4x6, took me a few print failures to figure that out. And, you have to change the sizing before you hit print because it won't change to correct sizing after you hit print, one more thing to remember is to change your printer location depending if you're printing a regular sheet of paper from your regular printer or printing from Rollo. These simple changes got me everytime. Rollo is a great printer, love it, thanks for the demo, Can I insert a blonde joke here?
Great tips!
Thanks! So where's the blonde joke?
@@joenwc A blonde woman decides that she is sick and tired of all the blonde jokes and how all blondes are perceived as stupid, so she decides to show her husband that blondes really are smart. While her husband is off at work, she decides that she is going to paint a couple of rooms in the house. The next day, right after her husband leaves for work, she gets down to the task at hand. Her husband arrives home at 5:30 and smells the distinctive smell of paint. He walks into the living room and finds his wife lying on the floor in a pool of sweat. He notices that she is wearing a ski jacket and a fur coat at the same time. He goes over and asks her if she is OK. She replies yes. He asks what she is doing. She replies that she wanted to prove to him that not all blonde women are dumb and she wanted to do it by painting the house. He then asks her why she has a ski jacket over her fur coat. She replies that she was reading the directions on the paint can and they said, "For best results, put on two coats."
@@VictoriaRickert lol!!! Good one!!! Thanks!😂😂😂
Very informative and helpful.....thanks Hairy Tornado! I heard those Rollo printers are really nice.
I love unboxing videos!
I just picked up a refurb Rollo printer (from Rollo) and it’s great!
Thanks for the info, I have been looking at the Rollo printer, for the very reason that you can use cheaper labels than brand name labels.
You can even get free labels from ups
Thank you, this is going on my "buy soon list"... !
It's awesome!
Don’t put clear tape over the label when shipping. Some how the ink disappears under it after awhile.
For those who is trying to print a label return from amazon, you have to hit shift +command 4 on the mac to select the image to capture the label first, save then print, I couldnt figure it out at first, because you get a label and a upc along with the label , so you have to select the label first, just a fyi, I enjoy my rollo! Thanks for the video!
Awesome man. It’s great watching your channel grow. Inspiring!
Prints fast! Can't wait to get my Dymo from you 🙌
Just bought one last week, love it! 👍
ANYONE ELSE HAVE THIS PROBLEM?
I work with a 501c3 and we ordered this and it came without a power cord....
We called and they said WE would have to find one!
I am starting to wonder where the owner of the company ordered it from after watching Josh at Amazon returns store 🤔
Yep. I’ve owned my Rollo for 6 months. Actually ordered and received the free (they overnighted a case) labels from UPS before I even bought the Rollo from Amazon (warranty). I think it was $160 and that was my only cost. Never had a problem with the label or the printer. It’s so fast and quiet. Winner all the way. DYMO is just a machine to get you to buy their overpriced labels.
Can you please send me the link where you got your rolo printer
@@sumanshrestha7916 I got it from Amazon.
Great thanks..this comment was 1 year ago ddnt expected a reply.. thankyouu:) 😀
@@sumanshrestha7916 you’re welcome. Good luck to you.
@@sumanshrestha7916 2 month old but you can get them manufacture refurbished on ebay with a 6month warranty for over 30% off retail price
Great review. I can't wait before I grow up and can get one!
Is there a way to make this wireless?
Unfortunately no. They are supposed to come out with a wireless version soon but no date it set yet
Sorry forgot the question 🫤any advice on affordable labels for the Rollo?
We just buy them on Amazon. You don’t have to use rollo branded labels. Any 4x6 thermal labels are fine
Glue Stick!! I print on regular paper, cut sheet and glue stick it to the box. Works for me.
Also... I could just buy some Fan-Fold Labels and feed them through my printer as I do with envelopes.
It works, but that's a lot of time
@@HairyTornadoActually not really. I don't sell much. I just ordered Avery labels 2 up on a sheet, 50 of them for $6 at walmart
really easy after you get it set up. But like you said, you have to be selling lots of stuff to require a label printer.
WOOF, WHAT A CUTIE!! Thanks for the review of this printer. I"m looking to buy one, too.
Haha your gay comment didn’t receive a heart
@@persiphoneisadude4547 LOL
Just got my Rollo today…$30 less than regular price…Amazon Warehouse “Used-Like New” 😉 Now to start my art/doll/etc. business! Thank you for the info! 🙏
I wish this was bluetooth so I can print from my iPad
Thank you for the info on the printers. I haven't had the pleasure of using one yet.
Do you know if its compatible ith chrome book?
I know i have been leaving lots of comments lately but I'm new and really like the way you conduct yourself. You seem to be so happy with life, your surroundings, and your friends. The past 2 weeks have been really good for me reselling. I'm getting 2 to 5 sales per day. Can build from that. I use many of your suggestions. Thank you for all you do to help. Hope to shake your hand one day as a colleague rather than student.
Been cutting and taping labels for 3 years, just got one these last week. Most labels ever tapped in a morning = 48
If you want it you'll get it the printer don't make the business.
Think about all the time you spent cutting and taping though. A label printer would pay for itself in a month.
@@HairyTornado nah I'd rather not think about it, this way it's time I didn't need to spend meditating. Plus now I can package any item perfectly. A frequent feedback is wow packaged so neatly. Wouldn't have happened without the investment.
I also didn't start watching others until two years in. Was a blessing to learn for myself niches. Appreciate the reply guy 👍 our stores the same size brother.
I just upgraded the Rollo last week. Actually got it at a discount too from Ralli Roots’ discount code. Had I known you were going to have an affiliate link I would’ve more than happy purchased it from you. I wouldn’t of mind buying it full price, I just like to support. Previous to the Rollo I did the two label per sheet method on my ink jet. Gotta say I love it.
I really like the review of the Rollo, Although I would love to have the Dymo, I think that the Rollo is the way to go for a full time seller. I am not there yet but glad that you are willing to really put it out there.
Yay thank you for this just bought
went to my local goodwill outlet today. What an experience! The saddest thing was finding a TI Scientific Calculator but the battery cover had fallen off at some point it was nowhere to be found.
Then as I made my way to the register my full shopping cart was only a little over 5 dollars! I think the cashier just guessed as a price since she did not weigh anything. I will be going back!
Exactly which model number of ROLLO printer is this please ??
I don't know of any other rollo printer. It's the one on Amazon for $189
I want to find a printer to print labels for my products. Does this type printer allow for light grays or "depth" for lack of a better term? My labels have a diagram built in solid works that allows the consumer to see how the product is installed. I'm already printing on peel off labels but like the efficiency of this type printer. Currently print 500-750 labels per month. Should be at 1250 in the next few weeks.
Does it come in a Bluetooth or wifi option?
Hey Josh, your videos and social media have been very informative. I have been watching a lot of other people and you seem to be able to answer most of the questions I need answers to. Been on Ebay for years and recently retired and looking for something to do as my boys have left for college. You may have saved my marriage.
Ive had a brother printer for about 9 years and never had a single problem with it. do you think this printer will be as reliable?
I sell on a platform that sends me shipping labels in PDF format. How easy is it to reformat a shipping label from a 8.5x11 size PDF file to fit into this 4x6 size thermal printer? Thanks!
yeah well i have to print uphill both ways barefoot in the snow lol. the rollo looks very slick nice review. i still use my canon inkjet and hasnt failed me yet.
Nice! Thanks for sharing!🤗
Wholeheartedly agree with the half sheet label option. I did that for a long time before I bought the Rollo (which I LOVE!) Another thing about the Rollo is that if you ship a lot through UPS you can get FREE labels! So your only cost would be the printer itself. Also, they are coming out with a WIFI option and my understanding is that they will give you the hardware to make this one backward compatible on request.
But that Rollo isn't Bluetooth like the Beeprt 426BT and the Beeprt 426BT is a lot cheaper than the Rollo at $149 just saying.
Do I have to cover the shipping label in a plastic slot bag or is it fine if I leave it. I just don't want any lost packages...????
Good video.
Bought a Rollo and 2k labels yesterday, make sure you get your cut. And your close out music reminds me of 90s Black porn.
I bought a remanufactured one from amazon. saved about $50. I ship UPS, FedEx, and USPS. I ordered labels from UPS for free. And I will probably get hate of this, but I use them for everything. I am not going to switch out labels for each package. You can if you like. I have been finding that flat rate on UPS is getting better, so I use them more. It is like 4000 fanfold labels or you can get roll labels.
So this is not Wi-Fi compatible them? I'm looking for a wireless label printer any ideas? The World Wide Web has been useless on this one.
This is not wireless. Brother makes a wireless printer but it is rarely in stock and costs close to $300
I don't know man, having a thermal printer for an eBay, etsy, et al business is a BIG DEAL. The amount of work and time it saves me is insane. It's the single best investment to an online retail business anyone can make, especially if you use sticky labels, which why wouldn't you?
I have a Dymo 4XL. Other than some occasional issues when loading a fresh roll, it's been a great work horse, but this Rollo does intrigue, although it is a little pricey.
I've been using a regular printer, cut/tape...for a long time. But I don't sell enough atm where I'm doing more then 1 maybe 2 a day. (working on listing 10 a day now) But something you didn't mention, is the SIZE & SPACE a regular printer takes up... I have a really nice Brother color printer that I got out of a Storage unit I bought, but it's HUGE! And ink is expensive even on eBay. So there's a lot of advantages to switching to a thermal. Great quick concise review! Thanks ..:)
As a kid I was out on a family camping trip. My dad accidentally cooked our dinner with one of those do not eat packets. We ate it and survived lol.
I’m in Australia and I don’t have a desktop/laptop system I only have my Apple iPhone and iPad devices so I was looking for a wireless/Bluetooth thermal printer to print my labels. I found one that seem to be amazing however to print one label from the time you press print from the app it took 65 seconds for the printer to start printing. And when I contacted the company they said that that was normal. So I quickly returned it because it was 10 times quicker for me to print with my usual printer onto paper and sticky tape it to the parcels as I’m really not sending more than a couple of items per day.
Just bought it through your link.
Thank you!
Dope! Man I want one so bad. I’m forcing myself to wait until I hit a certain level, then I’ll reward myself.
Ha dont be scared to invest otherwise you never will.
@@melbournestacker The sooner you do it the more money you save over time :) plus its a 100% write off on your taxes
I use a Brother laser jet printer right now. I use the 8 x 11 sheets that have two labels per sheet. I have to cut the sheets in half because when printing through ebay, half the page is like instructions and a receipt so it basically wastes a label. But cutting the sheet in half I am able to use both labels.
Hope I made sense.
I'm thinking that Rolo printer is the way to go.
There are settings on Ebay to where you can choose not to print all that extra junk at the bottom of the page. I dont know exactly where it is, but it's somewhere haha
@@HairyTornado I'll have try and find that.
I told myself when I sold X amount of $ I would invest in the Rollo. Think of it like this, if you pay $1 for an item and it sells for $10 (roughly $9 profit) and you do that 18 times you've paid $18 for a $162 printer. 18x9=162
I went for the Rollo after seeing Ralli Roots had it, reviews on the Rollo convinced me more than Dymo even though everybody I follow has Dymo. And (knock on wood) it has been great so far. Halfway through the 500 box of labels and love it!
Great video! I have a Rollo printer as well and love it! 🙌🏼🙌🏼
Thanks, How muhc is the ink cost?
It doesnt use ink
Does the Dymo takes less space on the desk comparing to the rollo + paper?
Slightly, yes
The Rollo is Awesome. I've had no problems at all. Good video who are unsure which thermal printer to get for their reselling business.
I wish somebody just answered just one question that no is even stating. Can a phone be use instead of a disk too to print???
No. You have to have it plugged in to a computer to print. The only thermal label printed that prints from a phone (that I'm aware of) is the one from Brother. But it is also like $100 more expensive than the rollo
I love my rollo. Thermal printers are a real game changer. Great video Josh. I struggled with the paper size at first too. Other then that it was a very easy install
Could you do a video on the different apps and websites you use to increase your productivity and profit.
Cover Girl has entered the chat. 👀 lol... No but in all seriousness, the Rollo thermal printer design is the superior design over the Dymo 4XL, and the worst thing about Dymo is that they're price gauging and taking advantage of the huge influx of resellers buying thermal printers and their asking price is ridiculous; also the only printer you ever hear of having issues is the Dymo; not the Rollo.
I personally decided to go with Phomemo with my thermal printer purchase. It has the same printer layout/design as the Rollo, and arguably even nicer (in my opinion)! I actually released a video about it as well just a couple of weeks ago! Not sponsored. I love it. It's beautiful piano white & black, and it just works. Best part is, it was CAD$50 cheaper than the Rollo, and CAD$100 cheaper than the friggen Dymo 4XL. 😎👌
Jody Mitoma's Videos in your opinion you think I should go with the Phomemo printer over the Rollo?
Good review, I may be leaning a little more towards the Rollo over the Dymo once my business picks up a little bit.
It has been brought to my attention that you can order 4x6 thermal labels from UPS for free and they come in a case of 6,000! I just ordered my Rollo printer today, do you know if these labels work in the Rollo printer and can you use them to print labels for USPS labels as well even though they came from UPS?
The free UPS labels are meant for customers that use UPS to ship all of their items. It should be obvious that you UPS doesn't want you using their free labels to ship priority mail through the USPS which is how we ship 95% of our items. We just made a decision that aligned with our morals and ethics to just buy our own labels on Amazon. They are pretty cheap and I feel confident using them to ship with any carrier since we paid for them ourselves.
Thanks for the product review! Could you also just use a regular (non-thermal) printer for your individual bar code labels for Amazon FBA purposes?
Creeping up on 10 000 feedback and have handwritten every single one.....Might be time for a Rollo!
Does your wrist hurt? Haha
I hv been writting mines out as well..just recieved the rollo.
Ouch just the amount you would have saved by not paying the extra at the post office you could have bought like 10 rollos
“Nonetheless, you da best!” Is that a new catchphrase? I don’t know but I love it!😄 That rollo printer sure is pretty!😍 Thanks for sharing❣️
Can I print anything on the label? For example some stickers
No. It only prints greyscale. Really only used for shipping labels
Has anybody encountered the white line issue that occurs sometimes? I just got a real good deal on a pre-owned one because of the white line issue, I cleaned it with alcohol and it still prints a thin white line.. any idea?
Just bought a rollo! Thanks for the 10% code.
Thank you!
Hi Harry I know that you bought this printer over a year now,how it goes do you still recommend it or us there an upgrade to that Thanks
I still use it! It's great! :)
Have had mine for couple weeks now and the only issue I have is the poor quality of the print on Amazon shipping labels (FBA and seller fulfilled). Everything else comes out fine...eBay, UPS, FedEx. Also the free case of 6000 fan fold labels from UPS was enough to last for the rest of my reselling days. Can’t beat that.
How do you get the 6000 free labels?
Does it print in color?
No
Can you use a tablet cause i dont own a laptop or computer
You cannot
Can you connect with phone?
No :(
Do u know if this works with a chromebook?
It doesnt out of the box, but there is a workaround that I've seen college picker do, I think
can the roll printer connect to an iPhone 11?
Per Rolo they will have a wireless option in a few months
Love it.... I still want to win!
can i use a Chromebook ?
I don't think Chromebooks work with Rollo
Is it wireless ?
No
check your upgrades
What does that mean?
@@HairyTornado Yesterday there were several updates not just to Windows but for drivers. I do not know if it was because it was the shut off date for Windows 7 and someone had nothing better to do but sometimes when the drop updates they have bugs and a couple of days later will drop a fix as an update. Like next week your computer could be working perfectly normal.
I am not a professional at computers, I have a great IT guy and he helps me but he is the one who has taught me to wait after updates because of fixes coming out days later.
I sent you an email also on somethings I have gone through which has improved my internet after having a tech here at least once a month for the last year lol Only way I can get a man into my apartment hahaha.
I was also informed by someone who used to work for my provider to once a month unplug my modem and router to stop static build up, which is worst in winter. I don't know about all of these things but it is all preventive things I do and they seem to be working well for me.
Keep up the great work you do!! You are making a difference!
I must not be “anybody in the worrrrld” because I’ve had the rollo for a year now and I still can’t figure it out 😭
Sounds like I’ll go read the user manual again