Rear Park Aid Warning FIXED 2011-2016 Ford Super Duty - Backup Sensors
Вставка
- Опубліковано 29 лип 2024
- Check Rear Park Aid problem showing up on my 2015 F-250.
Was getting quite annoyed with the warning constantly popping up. Mine happened to only be a failed backup sensor. Extremely easy fix, don't even need any tools to fix.
Chapters:
0:00 Check rear park aid
1:15 Checking sensors
2:15 Dorman replacement
2:34 2015 mid year sensor
3:26 Install
5:12 Test
5:30 Final Thoughts
Check out our channel: / @treasurestatetoolbags
Please like and subscribe if you want to see more!
#ford #f250 #6.2 #f350 #superduty #diy #automotive
Disclaimer:
Under no circumstances will Treasure State Toolbags (TST) be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by TST or a third party. In no event shall TST be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of TST, it cannot guarantee against improper use or unauthorized modifications of this information. TST assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. TST recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of TST, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not TST. All opinions are truthfully my own. This is an educational video I made for fun and not meant to be a step by step how to. - Авто та транспорт
This video saved me probably $500 to diagnose and replace the sensors. I had the same warning coming up. I did a search, found this video. I got 4 replacement sensors on Amazon for $20.00. I didn’t have a mic to test but I easily replaced all 4 in 10 minutes. Problem solved. Thank you 🙏
Nice! Glad it worked out for youI just had another one of the original sensors fail recently. I'll probably just do the same thing and get a cheap set and do them all. Thanks for watching!
Thank you for this,
Straight forward well done!!!
Thanks for the video! I can hear all of mine clicking but I still get the warning message. Any ideas?
Also, the exact same sensor is half the price on Amazon for anyone looking. Cheers!
There could be a lose or intermittent connection. Check for corrosion on the connectors, they may be powered (clicking/vibrating) but not being sensed by the PAM (parking assist module). I did find that the cheap bluetooth OBD2 scanner from harbor freight is actually really powerful and will scan all the modules in the truck and give you some more insight.
What if i dont have a mic like you had ? Should i beable to hear without ?
So, an interesting thing I should have had in the video... you can feel the sensor with your finger and feel it vibrating. You can also take a quick video with your phone or a camera up really close and hear it there. Hope that helps!
i can't hear anything from any of them. bigger problem or odds of all being bad?
I wouldn't think all 4 would fail at once, it may take some in depth troubleshooting with a multimeter or a scanner. Most bi-directional scan tools will pinpoint the specific sensor or if it's a larger issue with the parking module.
I changed all of them still hearing the tic noise but the truck still have the fail code
Sounds like you may have a bigger issue with the PAM or parking assist module. They can go bad or lose communication. May be worth getting a scanner or having it scanned to see if it's throwing codes.
SAME THING HERE! I replaced all FOUR (4) sensors, but still get message.
What did you use to test them?
I used a mic attached to my camera. You can take a video with your phone up close to each sensor to hear it. You can also feel the sensor with your finger and feel it vibrate or not. The easiest way is with a scan tool - this will diagnose individual sensors or indicate if there is a bigger problem.
Dealer was going to charge me $400 to replace my sensor 🙄
Ouch, yeah that seems expensive for just a sensor replacement, if that's all they had quoted.
ASSMAN