This thing is immaculate. Love the video and style. Seeing the combination of custom fabrication and filmmaking just hits different. Gets me excited to work on my own stuff. Keep cracking on!
I think this is singlehandedly THE most professional FPV video I've ever watched. Usually everything that has something to do with FPV has at least one point which is like "meh, I just hope and pray it works out" but damn, this build was on point!!!
Mobile runs on 868MHz for FCC and 915 for CE, so it's not that much of an issue unless you're using the wrong band at the wrong time. Still incredible though!
I don't understand at all, what is it for? Anyway, the video link will fall off before the control. I would understand if the video was on a dual channel. But drone control..
@ mainly, this is more for LR autonomous planes. Dual band allows for double the packet transmission or more packet redundancy, especially on non-LoRa MAVLink modes.
I watched the video 3 times already ! Nothing to say but awsome i feel inspired to try something similar , i would love to get my hands on the frame 😍 absolutely top notch, keep it up ! We want more videos of this thing. Bravo
What an introduction of a new Micro TX 🔥🔥🔥 I just listened random FPV Videos and then this popped up. Instantly folowwed 😮 You're Frame is amazing 😍😍 Really the best build/test video in a long time. Very creative.
Beautiful Quad Mate! while appereance dont affect performace, this things a stunner. makes me want to build something similar to carry a mirrorless camera
Nice build - Refreshing to see someone bring back the carbon tube arms. Not sure if they are really practical but damn they look hell nice with those decals.
Wondering what are those black pole antennas inside the ziplock bags? I was hoping you would show us where you were going to connect which antennas to which ufl sockets on rhe dbr4.😢
I'm now getting to the point where I can design my own drone, I'd go for a dead-cat design but this one really looks strong and makes the more sense to make the drone bigger once you're designing it yourself and not going with the limitation of buying another's frame. Thank you for your video mate!
Brother I've been flying in sims for over 4 years now I need one of those fancy aircrafts to experience my first flight..man I don't want die before flying
Here the same😅,flying around 2month in sims. Now i have to start in realLive😊. I buy the walksnail goggles L, a babape 2 and the radiomaster boxer😅. (And sell all my rc-plane stuff from the last years😊)... Flying fpv copters are so much more fun than flying planes😅
I don't understand at all, what is it for? Anyway, the video link will fall off before the control. I would understand if the video was on a dual channel. But drone control..
I might need to get one of these receivers for my macro. This receiver being on $30 is so respectable. Excellent build btw, I thought it was a beast class at first
Thanks mate! It's a balance of enjoyment vs effort for me. I'm out there most days but if I was vlogging or editing 24/7 I'd probably burn out. I've been trying to get a few shorts up lately of just stick/raw flights though. Appreciate the comment.
I'm amazed that those 30x30 escs being used for huge quads - like this one - aren't burning out. It's really a testament to their durability if they're holding up over time. I'm afraid to use that esc in an 8S 1300kv 7" that I've been planning for a while... maybe I should try it..
@@ScottTomlinson Wow. Aikon has always been good... maybe the ratings aren't total BS.. That will definitely save me money and time... Good experiment - thanks for replying - very helpful.
I REALLLLLLLY enjoyed this video. 2nd time seeing it. Mind blown first time... but forgot about it until seeing it again. Will you be selling this frame... and where can I get one? Please and thanks. I build and fly.
Awesome flying man 🤙🏻. I wish your drone was premade and for sale cuz i would totally buy 2 or 3 even. I’m not confident with soldering and putting all this stuff together.
Yo.. that quad is a beast!! Will this frame be available?? Thanks for the awesome video, I've never seen a quad that big be so nimble. It would be awesome for drift car chases 😮. After this vid I'm a new subscriber. Keep them dope videos rollin!! 🔥 🔥
So I didn't showcase the true real world advantages in this video but it's significant in noisy RF situations, like events or commercial sets. It's going to have a big impact on the cinelifter side of things when adding broadcast/transmission components to the drone too (DJI SDR for example). Personally, the mental aspect of the system translates to my flying too, like, can this even failsafe? I definitely can't ignore how that confidence is perceived. Sending it deep into split level car parks or over ocean etc.. Who cares if 2.4 chokes, 900 will kick in...Confidence
I haven't prepared any files yet but possibly can. There's a few intricate bits in the design and I've found the tube clamps vary in dimensions so you would need to modify certain parts at least. I doubt it would be a frame that could just be sent to shop without testing clamp widths etc. I also had to machine a couple mm off the apex cam mount as the clamps aren't exactly 28mm tall.
I only use and recommend PEM broaching nuts. Especially for something like this where it's the critical point for securing the arms. I get them from Mouser - Part #153-KFS2-M3 for Stainless or #KF2-M3-ET for Carbon Steel.
That's correct. 4 in total. The right side is 900 (one on the arm and one up front) The left side is 2.4. That's just how I arranged it. I got matching sized whip antennas but obviously the 2.4 is higher gain. I just wanted it to look symmetric mostly. The rx is just u.fl so any antennas are fine.
Hi I was wondering where to start to get into FPV drones or like I would just like some guidance in general when starting to buy drones and the controller and etc if you could give me a way to dm you that would be greatly appreciated I know some of the basics of fpv and what i need and i have several ideas but i just need some guidance.
This thing is immaculate. Love the video and style. Seeing the combination of custom fabrication and filmmaking just hits different. Gets me excited to work on my own stuff. Keep cracking on!
Thanks mate! Always inspired by your stuff too!
haha the tango 2 in the bin 😂 that cut deep
Sorry not sorry haha
@@ScottTomlinson 🤣 to be honest seeing more and reasons every day to swap. Just need to save some $ for the switch
@@ScottTomlinsonbest place for it 🚮
Just don't like the need two units for mavlink
@@wakingdreamfpvJust add a module to the tango^^
I think this is singlehandedly THE most professional FPV video I've ever watched.
Usually everything that has something to do with FPV has at least one point which is like "meh, I just hope and pray it works out" but damn, this build was on point!!!
There is a LOT of awesome jammed into 8 minutes here! I would 100% buy that frame kit. 😎
It's hard to know what's too much or too little these days. Might need to make teaser 1 minute vids and deep dive 20 min vids in the future haha.
woah what a bad ass lookin quad, this is really cool! i love the dual band , mind blown , i need one!
Also, flying around a mobile tower like that is baller. So much noiseeeee.
Didn't even break a sweat haha. The future is now! Thanks for the comments and stopping by again.
Mobile runs on 868MHz for FCC and 915 for CE, so it's not that much of an issue unless you're using the wrong band at the wrong time. Still incredible though!
@@whatsthematter8767 Kind of the point though no? Now there is no wrong time.
I don't understand at all, what is it for? Anyway, the video link will fall off before the control. I would understand if the video was on a dual channel. But drone control..
@ mainly, this is more for LR autonomous planes. Dual band allows for double the packet transmission or more packet redundancy, especially on non-LoRa MAVLink modes.
I watched the video 3 times already ! Nothing to say but awsome i feel inspired to try something similar , i would love to get my hands on the frame 😍 absolutely top notch, keep it up ! We want more videos of this thing. Bravo
most beautiful fpv drone ive ever seen, i definitelly need one
What an introduction of a new Micro TX 🔥🔥🔥 I just listened random FPV Videos and then this popped up. Instantly folowwed 😮 You're Frame is amazing 😍😍 Really the best build/test video in a long time. Very creative.
Thanks heaps mate!
Damn that quad looks sick!
What a ripper! Man I would love to be able to design and manufacture my own quad like that! Maybe one day
Wezley is with you!
He's with us all =p
That chonky baby looks sick 🔥
Damn that drone is sick
Beautiful Quad Mate! while appereance dont affect performace, this things a stunner. makes me want to build something similar to carry a mirrorless camera
Nice build - Refreshing to see someone bring back the carbon tube arms. Not sure if they are really practical but damn they look hell nice with those decals.
Wondering what are those black pole antennas inside the ziplock bags? I was hoping you would show us where you were going to connect which antennas to which ufl sockets on rhe dbr4.😢
Can we buy the files for prints and carbon fiber to build our own?😮
I'm now getting to the point where I can design my own drone, I'd go for a dead-cat design but this one really looks strong and makes the more sense to make the drone bigger once you're designing it yourself and not going with the limitation of buying another's frame. Thank you for your video mate!
Awesome man! It's a fun thing to design your own stuff.
Nice Video Brother, keep it up! THe Tango in the bin killed it for me xD
I think that tubular arms must bee incredible. It' s more stable to flats arms. I wold be love if I had one.
Yeah tube arms are much better for bigger crafts
This one will be famous in the market ❤ love it
Can I buy a frame from you?
Woah, lovely build mate
Killer video. Love the frame too, wish I had to tools and skills to design something like this !
Gorgeous build dude
Brother I've been flying in sims for over 4 years now I need one of those fancy aircrafts to experience my first flight..man I don't want die before flying
Good luck. Enjoy your first crash 😅
Here the same😅,flying around 2month in sims.
Now i have to start in realLive😊.
I buy the walksnail goggles L,
a babape 2 and the radiomaster boxer😅.
(And sell all my rc-plane stuff from the last years😊)...
Flying fpv copters are so much more fun than flying planes😅
4 years on sims?? You’re going to be a pro already on your first flight
@@Mattylite_FPV jes,i think the same🤣👍
OMG the shrine to Wez 😂😂😂
Great video as always mate 👍👍
top video man. so much better than all those typical youtube drone pilots. Quad looks sick and it rips
Thanks for checking it out man, appreciate the comment.
That frame is fire. 🔥
Sick vid lads. Nice little build mate
Cheers man
The look was soo good 😊
is the frame release yet ? i've been waiting to get hand on it .. i love the design of that frame
"Praying to the quad gods man" 😅
Wouldn't want it any other way
Nice build, nice freaking flying.
What a cool build.
Solid video mate, Lucky the camera man never dies.
12S next?
At least I know you won't haunt me. Why stop there =P
@@ScottTomlinson Hello. Tell. Will you make the drawings of this frame freely available as you did in your previous projects? :D
well funny thing is I ve thought you are dead. Did not see any of your videos since 2 years. Resubbed!
I don't understand at all, what is it for? Anyway, the video link will fall off before the control. I would understand if the video was on a dual channel. But drone control..
Love it ❤
Completely lost my shit in the first lol
Appreciate all the hard work!
Wow you have the most amazing designs thanks for sharing i would love to build one of these as well!😎
Love this!!
that tango in the dust bin haha
I might need to get one of these receivers for my macro. This receiver being on $30 is so respectable. Excellent build btw, I thought it was a beast class at first
How cool!!
Any updates on the endurance quads?
DAMN THAT DRONE LOOKS BADASSSSS
This is so sick wish the frame was available for purchase
Love your edit. Lots of work and love went in to that edit and I can see it. the content was great as well. I subbed up, Good show sir..
Thanks for checking it out man! Appreciate the words too.
What keeps the carbon tube from rotating? Quite a build!
The clamps haha. No need to key the arms in for something this small. They're not moving.
Killer frame.
This thing is dope! Let me know if you get these beauty’s to production
very nice , what kind of antennas are those . is there any sma type 2.4ghz antennas ?
Nice work! I really liked the design and I would love to build one myself! Are You planning to release drawings for sale or sth like that?
I swear, was this an episode of not an engineer? Loved it!
Dude is awesome hey. Another Aussie back yardie haha.
God where can i get this frame i would love this beast
I love your style of flying. Why don't You post more?
Thanks mate! It's a balance of enjoyment vs effort for me. I'm out there most days but if I was vlogging or editing 24/7 I'd probably burn out. I've been trying to get a few shorts up lately of just stick/raw flights though. Appreciate the comment.
You can cut the antenna just like that? Learning new things every day lol
Yep! Sure can
I'm amazed that those 30x30 escs being used for huge quads - like this one - aren't burning out. It's really a testament to their durability if they're holding up over time. I'm afraid to use that esc in an 8S 1300kv 7" that I've been planning for a while... maybe I should try it..
Oh yeah they're fine until about 10 inch typically. I just pushed the Aikon 35A 20x20 to a smoke test. Peaked at 89A
@@ScottTomlinson The Aikon peaked at 89A total or per esc for a total of 356A?
@mlentsch I was just running a test. Single motor (a 5015 with 17 inch prop) on one channel yeah. Pretty crazy.
@@ScottTomlinson Wow. Aikon has always been good... maybe the ratings aren't total BS.. That will definitely save me money and time... Good experiment - thanks for replying - very helpful.
Awesome video. That frame available anywhere? Or files?
The frame is awesome, looking for publis or sale
I REALLLLLLLY enjoyed this video. 2nd time seeing it. Mind blown first time... but forgot about it until seeing it again. Will you be selling this frame... and where can I get one? Please and thanks. I build and fly.
Wow..... just wow!!!
Hey Scott, Brilliant dude! I would love to get some of those frames! Let me know how to ?? 🙂
Hello blogger, it's great to see such a wonderful video May I ask what the weight of this aircraft without batteries is in grams thk
Amazing drone, its frame is available to buy? Where is the shop and shut up and take my money
Working on it mate.
@@ScottTomlinson is amazing if you do not develop the product, please sell to me this frame, please
Real talk. This is one of the coolest frames I've ever seen. NEED IT.
@@cllgscreative Me too!!!
@@ScottTomlinsonhi man! So I'm wondering when you are ready to sell it? Please remember me for one unit, please don't forget it
Yoooo sigil of Wesley got me. lol
45º camera tilt 😂that is mad! how fast are you flying! Wkd build
Awesome flying man 🤙🏻. I wish your drone was premade and for sale cuz i would totally buy 2 or 3 even. I’m not confident with soldering and putting all this stuff together.
So... Where can we buy that frame at? Because it looks lovely...
awesome. mind sharing stl or profile.
How much for the frame?! I love the tubular design that cuts through the air
Rubberquads was the first one i loved flying but hard AF to put together
I’ve been flying a Flywoo explorer but man does your drone make me want to build ine with tubular arms looks sick
must say that is a rad build, frame design is nice as. you selling these scott?
Hello what is the name of that hardware you use to mount plates on tubes ? Thanks
What’s the advantage of those 2 caddx vista vtx antennas over the single stock dji one?
This frame looks cool how can we get this frame
Where is we can buy or download frame?
Great work! What is the G10 isolation mentioned around 2:04?
Isolates the O3 ground from the frame.
Where can I order this frame? Can you send a link?
We need to know runtime of that 8s china battery setup . Definitely should carry molicel built pack . What kind of amps it sucking down ?
Yo.. that quad is a beast!! Will this frame be available?? Thanks for the awesome video, I've never seen a quad that big be so nimble. It would be awesome for drift car chases 😮. After this vid I'm a new subscriber. Keep them dope videos rollin!! 🔥 🔥
素晴らしい👍
8inch 4S.6S.?
飛行時間は？
8S! About 5 minutes with 3300
Thank you for your kindness.🫶
that is a pretty sick setup - are you going to sell that frame?
I mean cool but, the vtx is always gonna go out way before the rc link no? What's the point?
So I didn't showcase the true real world advantages in this video but it's significant in noisy RF situations, like events or commercial sets. It's going to have a big impact on the cinelifter side of things when adding broadcast/transmission components to the drone too (DJI SDR for example). Personally, the mental aspect of the system translates to my flying too, like, can this even failsafe? I definitely can't ignore how that confidence is perceived. Sending it deep into split level car parks or over ocean etc.. Who cares if 2.4 chokes, 900 will kick in...Confidence
Awesome! that smoke does not look healthy😂
Yeah that's not one you want to huff too often haha
I want that FRAME, also just ordered my nomad and dbr4 receiver.
Wow, what a beautiful drone! Have you shared the plans somewhere? Or are you planning to do so?
I haven't prepared any files yet but possibly can. There's a few intricate bits in the design and I've found the tube clamps vary in dimensions so you would need to modify certain parts at least. I doubt it would be a frame that could just be sent to shop without testing clamp widths etc. I also had to machine a couple mm off the apex cam mount as the clamps aren't exactly 28mm tall.
where the frame i can get like that..
Amzing work, One question popped tho, you're not limiting your ESC for those motors in 8S ?
No need, they are capable of that no problem. The motors are only 1010kv.
Lmao that intro. 😂😂 Spilled my drink all over. Worth it!
Haha glad it had an impact. Thanks for stopping by again man!
Hey Scott Love your work!! any chance you can share a source for press nuts?
I only use and recommend PEM broaching nuts. Especially for something like this where it's the critical point for securing the arms. I get them from Mouser - Part #153-KFS2-M3 for Stainless or #KF2-M3-ET for Carbon Steel.
@@ScottTomlinson Cheers! I've had them sitting in my cart for weeks hahahah :) thought you may have a better source.
The build books great? Is this frame for sale?
really great
I want this!!! For real i want this
Oh the folding gimbals on the t2 are so you can fit more in the garbage can.
I thought it seemed more empty than usual! Haha. I did love the T2. Just a little outdated now
So on the rear arms there are 2,4 and 900 antennas and that two huge one on the front are also one in 900 and the second 2,4?
That's correct. 4 in total. The right side is 900 (one on the arm and one up front) The left side is 2.4. That's just how I arranged it. I got matching sized whip antennas but obviously the 2.4 is higher gain. I just wanted it to look symmetric mostly. The rx is just u.fl so any antennas are fine.
@@ScottTomlinson could you, please, provide links to these antennas?
Where can I buy this frame?
are the TE Connectivity whips dual band? or one whip on each frequency? and are they hinged??
One for each frequency. Not hinged, no.
such a sick looking quad, fuckin nice build
Hi I was wondering where to start to get into FPV drones or like I would just like some guidance in general when starting to buy drones and the controller and etc if you could give me a way to dm you that would be greatly appreciated I know some of the basics of fpv and what i need and i have several ideas but i just need some guidance.
Joshua Bardwell on UA-cam.