I have owned this tool for 5 years and it is fantastic it has never let me down i have used it for so many projects including driving deck screws and lag bolts and it still keeps going
Umm ok. Why hasn’t this channel got like 50k subs... such a professional in depth review, exactly what I was looking for and I was shocked at the likes and subs... deserves so much more
I really like this screwdriver because of the mechanical clutch! The new ones have E’Clutch (electronic clutch) and I just don’t feel they’re accurate.
People are asking why this instead of just using a drill with the clutch setting. Well most drill are still more powerful at the lower setting. Especially for AIRCRAFT PANELS!. this tool is perfect for the aviation industry
There's nothing more annoying than having to hand-screw something together ua-cam.com/users/postUgkx1McjgiqTNcTjrhvRvJWcrk5bzTeQW-Wn except for the pain in your wrist that is. This addition to my tool kit is great and I can get a lot done without all the pain and annoyance. The battery last's a long time and I have yet to run out of power when doing a small project (granted I am saying small project because I'm no construction worker). The only thing that I wish it had was an LED or pair of LEDs to indicate when it was charging and whether or not the charge was complete (or full).
Does this drill make that impact noise ?? Or no because the only reason i want to get this is because sometimes i work in a costumer house and they dont like the noise that my surge does
No, it does not make the same noise as the impact drill or the surge. However, it does make a lower clicking noise when it’s met the limit of the setting that you have it dialed into. Thanks for commenting and consider giving me a thumbs up and subscribing!
It's nice for its purpose, but I already have the m12 fuel 1/4 impact that has the 4 settings on it and on setting 1 is great for little screws and smaller precise jobs. Plus the other settings will get you up to what an 18volt impact will do👍.. I cant see spending the extra money on this for me..that said if the first version kit of this screw driver is in the store again for 50$ like around this last Thanksgiving with the two 1.5 amp batterys charger and bag...I'd get that one just cause..its a deal at that price.
It still isn't as low torque and as small as the screw driver. Don't be stubborn and cheap, buy one and you'll use it. Got mine in the kit with charger and 2 batteries for $69.00 a few weeks ago.
@@rtgray7 Your absolutely right, I'll get one eventually. I can see how they can be very useful for low torque applications. I am cheap😄 lol, But when I do buy somthing its usually pretty expensive. So I've got to cut cost where i can when i can..
This is the one I really wanted I got the brushed version....it's really good though I'll probably still buy this and keep the brushed version for in the house stuff
I get why this exists but can you just feather the impacts or set the speed on it and do the same job as this will? I mean if i were to get a fuel screw driver i would get the installation one for the angles.
Impact doesn’t have different clutch settings. The installation driver has the forward reverse switch on the top of the tool. I prefer the normal switch on this tool. I have the 1 speed brushed version but wonder if this is worth the upgrade.
no mate, to be honest no tool or method replaces what this one can do and do so well. to everyone asking why not just use, etc etc etc, you would need to use this one to answer all your Q'S it's an all in one tool drills, screws, 2 speed, adjustable clutch, compact and more.
My question is how good is it on delicate stuff ? I need something that can also go very easy on small screws with a soft setting on the clutch and good trigger control? All the videos I’ve seen so far is going on on how powerful it is witch is actually besides the point of this gun ?? If I want a powerful gun I’ll get the M18 impact driver because it’s made for it …..🤨
Yes, I think it will do what you need to do for sure. But in the end I ended up going with the Dewalt Xtreme screwdriver. Because I needed something to be delicate, where I can control the torque. Dewalt extreme screwdriver fit the bill. Thanks for commenting, consider subscribing and l consider leaving me a thumbs up.
Yes, this was one of my favorite tools but I ultimately ended up taking it back and got the Dewalt Xtreme drill. You’ll be very happy with the Milwaukee! Thank you for commenting consider giving me a thumbs up and subscribing!
Thanks for commenting. The biggest difference is one is fuel the other is not, which is a signature of the new lineup. Also the fuel has more torque. Consider giving me a thumbs up and subscribing.
it only runs for about 30 minutes of good use. but it has plenty of power and is very nice to carry and use on smaller projects. mine has given me great service and has paid for itself many times over. I've had mine for about 3 years. its held up very well.
Different uses imo. This is better for precise work than the install driver. That said you could probably get the brushed version of this for that, what I have.
Sounds like one heck of a deal and you can’t go wrong with Milwaukee m12! lineup. Consider giving me a thumbs up, subscribing and thanks for commenting.
@@COR0NAD0 yeah, I had given the thumbs up 👍🏾. I had already bought the impact tool only from Amazon for $79. The surge is like $150 though. Forget a bunch-a-that.
Yes, it does have a clutch setting at the very top. You can move it from 1 to 2, depending on what you’re working on. Thanks for commenting consider giving me a thumbs up and subscribing.
This has an adjustable clutch that goes from very minimal torque to high torque. It allows you to put screws in without risk to damaging the material you’re working with. It’s a over glorified screwdriver that easier to control. Thanks for the comment.
I don't own a regular drill because I have drill bits and spade bits that have a hex end. So to me this is my drill, but it's also what I use for driving screws with the clutch settings, and I even drive larger fasteners instead of picking up my impact. It kinda does everything!
That’s correct this is a cordless drill. However, there are more compact Milwaukee drills available that would definitely beat this one. Thanks again for commenting, consider subscribing and thanks for watching!
I bought it on sale for $120 but I had to order it online because they don’t carry in stores. Thanks for commenting, consider subscribing and leaving me a thumbs up.
I got the Milwaukee originally which is an M12. However, even at its lowest setting it was still going through delicate wood. It’s actually a great drill and just too powerful even on the lowest clutch study. If you look at my latest video I returned it and stated this and ended up getting a DeWalt Xtream 12v cordless screwdriver drill.
@@jesterraj There are a multitude of reasons to get the screwdriver instead of the drill. I’ll start off by saying I own Bosch tools. 1. Weight, (The difference between a (Bosch) 12 V drill and a (Bosch) 12 V screwdriver from Bosch it is 2 pounds with battery vs 1.6 pounds with battery) 2. Chuck damage, If you’re working on a customer/end-users cabinet or piece of furniture you can damage the finish with your chuck (especially if it is a all metal Milwaukee chuck) 3. Size, I can fit my hand (I can palm a basketball) and PS 32 with a 6 inch paddle bit and a 6 inch extension into a hole that you would cut for an LV1 or an old work box to be able to drill down to be able to pull up wire or cabling. This is not something that you can do with any of the other 12v platforms. If you’re using a drill with a chuck on it this means that instead of being able to keep two things that would fit into your toolbelt like a paddle bit and a 6 inch extension that you’re now heading back out to the van/truck to get a 4 foot flex bit and then after utilizing this bit you then have to figure out where you’re going to put it down where you’re not going to damage flooring or furniture. 4. Delicate, like the reviewer already said it’s just more precise tool.
The dewalt xr screwdriver is much smaller and lighter then this Milwaukee. But I believe this Milwaukee has more power. But I have to admit dewalt has the most comfortable grips.
If you watch my other videos I did pickup a DeWALT XTREME (12v) screwdriver for the exact reason you mentioned. Thank you for commenting and consider subscribing!
@@COR0NAD0 knowing that you have used the Milwaukee one , do you think it's necessary to have the dewalt as well ? As a tool guy I find myself finding any reason to buy another tool that I don't need or replacing one that is perfectly OK with a new one .
Wow , why you need screwdriver with 2 speeds and brushless version of it??????? It’s pointless for you because you are DIY guy , you not the factory worker who needs second speed for a tough conditions they have....
But in case I need it, I have it. Doesn’t cost extra to get it or not comes with it automatically. Thanks for commenting, consider giving me a thumbs up and subscribing!
I have owned this tool for 5 years and it is fantastic it has never let me down i have used it for so many projects including driving deck screws and lag bolts and it still keeps going
Does it have an electronic clutch?
Milwaukee for DIY is NOT overkill. Buying crap for DIY is stupid. You did good.
Agreed. Buying crap is always more expensive.
Thank you for such an honest review bro!! Getting into the fuel line soon!
Thank you for commenting and consider subscribing and giving me a thumbs up!
Good review, smart move covering serial numbers on the web 👍🏽
I have the non fuel screwdriver but i love it its an awesome combo and im an electrician
Umm ok. Why hasn’t this channel got like 50k subs... such a professional in depth review, exactly what I was looking for and I was shocked at the likes and subs... deserves so much more
Still true!
🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
He threw the instructions
I do hvac and I feel like this would be practical opening closing ac cabinets doing everyday service / installs
I have had this for years this is the most widely used tool I can't imagine life without it the clutch is so useful
SIR James. Much respect to you from northern California
Can we be homies
I really like this screwdriver because of the mechanical clutch! The new ones have E’Clutch (electronic clutch) and I just don’t feel they’re accurate.
New subscriber!.thanks for the video
People are asking why this instead of just using a drill with the clutch setting. Well most drill are still more powerful at the lower setting. Especially for AIRCRAFT PANELS!. this tool is perfect for the aviation industry
People are obstinate and cheap bro! If they get one of these, they'll swear by it...
@@rtgray7 I fucken love my m12 screw driver, I have the m18 fuel combo and I my screw driver is my favorite, perfect for car panel removals.
@@deeshnutsh just why not? its smaller, lighter, and even faster because you wont deal with destroying screws
There's nothing more annoying than having to hand-screw something together ua-cam.com/users/postUgkx1McjgiqTNcTjrhvRvJWcrk5bzTeQW-Wn except for the pain in your wrist that is. This addition to my tool kit is great and I can get a lot done without all the pain and annoyance. The battery last's a long time and I have yet to run out of power when doing a small project (granted I am saying small project because I'm no construction worker). The only thing that I wish it had was an LED or pair of LEDs to indicate when it was charging and whether or not the charge was complete (or full).
@coronado does this have a mechanical or an electric style clutch? Thanks!
Hello, can you tell if your one is wobble (runout) when newly purchased?
awesome
Does this drill make that impact noise ?? Or no because the only reason i want to get this is because sometimes i work in a costumer house and they dont like the noise that my surge does
No, it does not make the same noise as the impact drill or the surge. However, it does make a lower clicking noise when it’s met the limit of the setting that you have it dialed into.
Thanks for commenting and consider giving me a thumbs up and subscribing!
It's nice for its purpose, but I already have the m12 fuel 1/4 impact that has the 4 settings on it and on setting 1 is great for little screws and smaller precise jobs. Plus the other settings will get you up to what an 18volt impact will do👍.. I cant see spending the extra money on this for me..that said if the first version kit of this screw driver is in the store again for 50$ like around this last Thanksgiving with the two 1.5 amp batterys charger and bag...I'd get that one just cause..its a deal at that price.
Was it a “fuel” tool?
@@dumdiversaspapalbull1452 yes it was. Now that fuel screwdriver kit is back to 99$ pretty sure.
It still isn't as low torque and as small as the screw driver. Don't be stubborn and cheap, buy one and you'll use it. Got mine in the kit with charger and 2 batteries for $69.00 a few weeks ago.
@@rtgray7 Your absolutely right, I'll get one eventually. I can see how they can be very useful for low torque applications. I am cheap😄 lol, But when I do buy somthing its usually pretty expensive. So I've got to cut cost where i can when i can..
I’ll stick it in my electrical kit. Impact is in the case with the hammer drill/driver.
This is the one I really wanted I got the brushed version....it's really good though I'll probably still buy this and keep the brushed version for in the house stuff
I get why this exists but can you just feather the impacts or set the speed on it and do the same job as this will? I mean if i were to get a fuel screw driver i would get the installation one for the angles.
Impact doesn’t have different clutch settings. The installation driver has the forward reverse switch on the top of the tool. I prefer the normal switch on this tool. I have the 1 speed brushed version but wonder if this is worth the upgrade.
no mate, to be honest no tool or method replaces what this one can do and do so well. to everyone asking why not just use, etc etc etc, you would need to use this one to answer all your Q'S it's an all in one tool drills, screws, 2 speed, adjustable clutch, compact and more.
My question is how good is it on delicate stuff ? I need something that can also go very easy on small screws with a soft setting on the clutch and good trigger control? All the videos I’ve seen so far is going on on how powerful it is witch is actually besides the point of this gun ?? If I want a powerful gun I’ll get the M18 impact driver because it’s made for it …..🤨
Yes, I think it will do what you need to do for sure. But in the end I ended up going with the Dewalt Xtreme screwdriver. Because I needed something to be delicate, where I can control the torque. Dewalt extreme screwdriver fit the bill. Thanks for commenting, consider subscribing and l consider leaving me a thumbs up.
Did not know this thing existed, thought they only had a brushed version
Yes, this was one of my favorite tools but I ultimately ended up taking it back and got the Dewalt Xtreme drill. You’ll be very happy with the Milwaukee! Thank you for commenting consider giving me a thumbs up and subscribing!
How's this different from the M12 BD?
Thanks for commenting. The biggest difference is one is fuel the other is not, which is a signature of the new lineup. Also the fuel has more torque. Consider giving me a thumbs up and subscribing.
Wish they updated it. Make it shorter more powerful. I went with the Gen 3 hammer drill driver instead.
Try the m12 multitool... it's awsome
Will have two take a look at it. Thanks for watching and commenting!
I was thinking of getting the multi too. How long can u use the multi tool with the 2.0 battery? Thanks!
it only runs for about 30 minutes of good use. but it has plenty of power and is very nice to carry and use on smaller projects. mine has given me great service and has paid for itself many times over. I've had mine for about 3 years. its held up very well.
Is this tool made obsolete with the installation driver now?
Different uses imo. This is better for precise work than the install driver. That said you could probably get the brushed version of this for that, what I have.
I don’t like the forward reverse switch on the installation driver. It is on the top of the tool.
Nah, different tool.
Dude you don’t know the clutch settings from the speed settings
Surge kit on sale at The Home Dumpot. Tool, 2 m12 batteries, charger, and 👀 like zip up 💼 for $179.
Sounds like one heck of a deal and you can’t go wrong with Milwaukee m12! lineup. Consider giving me a thumbs up, subscribing and thanks for commenting.
@@COR0NAD0 yeah, I had given the thumbs up 👍🏾. I had already bought the impact tool only from Amazon for $79. The surge is like $150 though. Forget a bunch-a-that.
Will a 1” Hex bit fit without an extension?
As long as it’s a 1/4 bit, it should fit. So to answer your question yes, a 1 inch will fit completely with no issues.
He pry means the length. If its not long enough it will engage and not be sticking all the way out of the chuck pain in the butt to get out
This was an unboxing. Not a review. You can’t review something if you haven’t used it.
That’s great, thanks for pointing out the difference. I appreciate it, consider given me a thumbs up and subscribing.
He didn’t say it was a review
Shots fired
This dude will squeeze your head until ooze comes out your eyes
Look into the M4 power screwdriver
That thing is a fucking rip off and the M4 batteries aren't interchangeable with anything else, so why?
Just order one fuel are the future
Is it variable speed?
Yes, it does have a clutch setting at the very top. You can move it from 1 to 2, depending on what you’re working on. Thanks for commenting consider giving me a thumbs up and subscribing.
@CORONADO76 thanks for replying so quick! So variable speed in both settings?
I bought both the brush and the brushless m12 screwdriver I also bought the Dewalt 12v brushless and I like the Dewalt xtreme feels better and cheaper
Agree, I also bought the Dewalt Extreme as well after renting my Milwaukee drill. More comfortable and better priced.
Xtreme line is excellent as well!
Can’t be cheaper if you have to buy a whole different setup. If you already have Dewalt then it might be.
@@COR0NAD0 Which has the finer trigger control, so you can really fade smoothly and easily from slow to fast?
Why does my charger light turns red and green?
If RED and GREEN LED’s begin to flash simultaneously the battery pack is damaged or faulty and will need to be replaced.
@@COR0NAD0 it’s new
@@salazar3089 documents.milwaukeetool.com/TIY476.pdf
Battery is fubar. (Fkd up beyond any repair)
Speed control not clutch setting
Thanks for the comment and viewing!
why would you need this as opposed to a drill or impact driver
This has an adjustable clutch that goes from very minimal torque to high torque. It allows you to put screws in without risk to damaging the material you’re working with. It’s a over glorified screwdriver that easier to control. Thanks for the comment.
You need something with low torque precision for interior work. Dash and trim screws are fragile compared to bolts
Lighter, smaller, quieter than an impact, and has a clutch.
I don't own a regular drill because I have drill bits and spade bits that have a hex end. So to me this is my drill, but it's also what I use for driving screws with the clutch settings, and I even drive larger fasteners instead of picking up my impact. It kinda does everything!
Don't understand, it looks like a cordless drill but somewhat smaller...not much....most drills have clutches...
That’s correct this is a cordless drill. However, there are more compact Milwaukee drills available that would definitely beat this one. Thanks again for commenting, consider subscribing and thanks for watching!
Need to make the charger a little beefier
This is pretty standard build on chargers. Thanks for commenting and consider subscribing!
1/4 inch hex
You go over everything except for price. Why most videos never say more details.
I bought it on sale for $120 but I had to order it online because they don’t carry in stores. Thanks for commenting, consider subscribing and leaving me a thumbs up.
The model number is my birthday so I should get one for free
Great idea! Thanks for commenting and consider given me a thumbs up and subscribing.
But if you havea M12 drill why bother getting this? The drill have the cluthch as well...just my 2 cent....nice review thou.
I got the Milwaukee originally which is an M12. However, even at its lowest setting it was still going through delicate wood. It’s actually a great drill and just too powerful even on the lowest clutch study. If you look at my latest video I returned it and stated this and ended up getting a DeWalt Xtream 12v cordless screwdriver drill.
@@COR0NAD0 understood.
@@jesterraj There are a multitude of reasons to get the screwdriver instead of the drill. I’ll start off by saying I own Bosch tools.
1. Weight, (The difference between a (Bosch) 12 V drill and a (Bosch) 12 V screwdriver from Bosch it is 2 pounds with battery vs 1.6 pounds with battery)
2. Chuck damage, If you’re working on a customer/end-users cabinet or piece of furniture you can damage the finish with your chuck (especially if it is a all metal Milwaukee chuck)
3. Size, I can fit my hand (I can palm a basketball) and PS 32 with a 6 inch paddle bit and a 6 inch extension into a hole that you would cut for an LV1 or an old work box to be able to drill down to be able to pull up wire or cabling. This is not something that you can do with any of the other 12v platforms.
If you’re using a drill with a chuck on it this means that instead of being able to keep two things that would fit into your toolbelt like a paddle bit and a 6 inch extension that you’re now heading back out to the van/truck to get a 4 foot flex bit and then after utilizing this bit you then have to figure out where you’re going to put it down where you’re not going to damage flooring or furniture.
4. Delicate, like the reviewer already said it’s just more precise tool.
@@thetruth5210 ok great thx...im sure other ppl were thinking the same..
@@thetruth5210 which bosch driver you using that is 1.4lbs with battery?
Let me show you how to read em 😂😂😂😂
Thanks for the comment!
The dewalt xr screwdriver is much smaller and lighter then this Milwaukee. But I believe this Milwaukee has more power. But I have to admit dewalt has the most comfortable grips.
If you watch my other videos I did pickup a DeWALT XTREME (12v) screwdriver for the exact reason you mentioned. Thank you for commenting and consider subscribing!
@@COR0NAD0 knowing that you have used the Milwaukee one , do you think it's necessary to have the dewalt as well ? As a tool guy I find myself finding any reason to buy another tool that I don't need or replacing one that is perfectly OK with a new one .
The chargers kind of cheap
Thanks for commenting consider subscribing!
Wow , why you need screwdriver with 2 speeds and brushless version of it??????? It’s pointless for you because you are DIY guy , you not the factory worker who needs second speed for a tough conditions they have....
But in case I need it, I have it. Doesn’t cost extra to get it or not comes with it automatically. Thanks for commenting, consider giving me a thumbs up and subscribing!