I had a border collie that would get behind the drivers wheel every time that i got out of the car like your dog does. He looked like he was driving the car. I was in Kingman az at a circle K getting a drink when i said out loud you can't drive you don't have a license when a cop look out at the car and started to laugh because it looked like he was the driver. He was trianed that he would not go thru the gate when they were left open. He would chase a dog to the gate and stop. If his ball went beyound the gate he would stop at the gate and look back at you to get his tennis ball.
My old 1997 had both windows shot out with tear gas grenade by sheriff as a meth addicted lady stole it and would not get out. Picked up one window at salvage yard yesterday. This will be a great assist in my installation. Thank you.
Nice work..I would suggest on these instructional videos to tag them with a few different terms..5 to 8 should be sufficient..this way they have a better chance of showing up when people search..just trying to help...keep up the good work..on a side note I have family in bridger valley so your videos give me a taste of home without all the calories i.e. snow and freezing cold weather lol
Man, I wish I had found your video a week ago. I took my truck to get that same glass repair, the idiot at the glass repair shop ended up "cutting and pulling" the whole frame out because he didn't take the time to go inside the truck and take the screws off, so once he removed the broken glass around the frame, he just cut and violently pulled the whole frame off the truck, literally pulled and cut the frame to get it out and totally damaged the frame, I could see the screws that hold the frame in place. I didn't get to him on time to stop him, when I did he was already tearing the last piece off the frame from the screw holding it to the truck, then he proceeded to cut the thin "exterior" part of the frame, the black thin part you see on the outside and placed the new glass on the empty space, empty metal, secured it to the metal with a ton of black silicone he put around the empty space, and when he was done, after four and a half hours he took fixing it, he threw the old rubber frame that was left from when he cut it, in the trash, he said "no need for that part now" and had the balls to charge me 90 bucks. I was so mad that I paid him and left because if I had stayed one more minute I would have punched the hell out of him and I'm a very peaceful man. He was a moron who kept bragging he was in the business 28 years, go figure.
Water pump on Ford 351w, if you get the bolts that go through the coolant passages out without snapping off you got it made. Major snow forcasted it hit Wyoming tues and Wednesday
major overhaul on the 7.3? More details please.The little F-150 is interesting but more of a yawn to me. The 7.3,being a real truck and not a sedan with a box on the back is what I'm waiting for. Other than that hope all is well there. Did manage to stick my JD 5320 the other day: still wet down here and drove into a hog wallow when mowing.
Good evening, I'm from Brazil and I was curious what year is this ford ranger and model, because I would like to put the safety belt on the back column where you released it before finishing, to have more security for those who are behind, thank you if you can tell me inform, and not forgetting it is possible to place this side glass but being from the mazda truck that opens on the ford ranger 97
@@GuyinWY I have the perfect project for you, it's going cheap for you only. Read my comment I posted and let me know if your interested. Thanks for the shows Blake.
Good job on that little window. U do very well at times. I was under the impression the Mighty F350 had minor issues. What ? Did u say OVERHAUL????? Lol I thought u were gonna delete the white ram ? Still waiting
Looks like you have a little automotive repair shop there!😃 Btw, is the mic on your camera dirty or something. Lately the sound isn't that good which is a shame because I like this kind of video
You did a perfect splice but your butyl tape was a little too thick. It can be pulled and stretched out...Normal sizes are 3/8, 5/16, 1/4 round or square.....
I had a border collie that would get behind the drivers wheel every time that i got out of the car like your dog does. He looked like he was driving the car. I was in Kingman az at a circle K getting a drink when i said out loud you can't drive you don't have a license when a cop look out at the car and started to laugh because it looked like he was the driver. He was trianed that he would not go thru the gate when they were left open. He would chase a dog to the gate and stop. If his ball went beyound the gate he would stop at the gate and look back at you to get his tennis ball.
My old 1997 had both windows shot out with tear gas grenade by sheriff as a meth addicted lady stole it and would not get out. Picked up one window at salvage yard yesterday. This will be a great assist in my installation. Thank you.
Might want to try an RV shop for butyl tape. Used quite often on them to seal the windows on them
Thanks man! I was gonna call a glass guy and have them do it but I decided to UA-cam it and boy am I glad I did!
I look forward to you videos all the time
You make it look easy. I'm doing my 1991 f150 window. I found a replacement window at the dismantling yard.
That was a pretty easy repair. Thanks for sharing!!
You saved me almost 500$ man. Thanks so much for the video!
Nice work..I would suggest on these instructional videos to tag them with a few different terms..5 to 8 should be sufficient..this way they have a better chance of showing up when people search..just trying to help...keep up the good work..on a side note I have family in bridger valley so your videos give me a taste of home without all the calories i.e. snow and freezing cold weather lol
Dude.. thank you. After seeing this, im off to fix my leaking side window.
Man, I wish I had found your video a week ago. I took my truck to get that same glass repair, the idiot at the glass repair shop ended up "cutting and pulling" the whole frame out because he didn't take the time to go inside the truck and take the screws off, so once he removed the broken glass around the frame, he just cut and violently pulled the whole frame off the truck, literally pulled and cut the frame to get it out and totally damaged the frame, I could see the screws that hold the frame in place. I didn't get to him on time to stop him, when I did he was already tearing the last piece off the frame from the screw holding it to the truck, then he proceeded to cut the thin "exterior" part of the frame, the black thin part you see on the outside and placed the new glass on the empty space, empty metal, secured it to the metal with a ton of black silicone he put around the empty space, and when he was done, after four and a half hours he took fixing it, he threw the old rubber frame that was left from when he cut it, in the trash, he said "no need for that part now" and had the balls to charge me 90 bucks. I was so mad that I paid him and left because if I had stayed one more minute I would have punched the hell out of him and I'm a very peaceful man. He was a moron who kept bragging he was in the business 28 years, go figure.
You make that look way too easy. Good information that's for sure. Thanks for sharing. Stay safe.
Water pump on Ford 351w, if you get the bolts that go through the coolant passages out without snapping off you got it made. Major snow forcasted it hit Wyoming tues and Wednesday
Good tutorial Blake, thanks for the window video
Look like you are having fun doing repair work. Jim s in CS.
Thanks for the video, just changed my window, Ford RANGER
major overhaul on the 7.3? More details please.The little F-150 is interesting but more of a yawn to me. The 7.3,being a real truck and not a sedan with a box on the back is what I'm waiting for. Other than that hope all is well there. Did manage to stick my JD 5320 the other day: still wet down here and drove into a hog wallow when mowing.
That's very helpful thank for doing this. I got a 00 model but I have a better idea now. God bless.
Yep be interested in the Ford 7.3
Would love to have those side mirrors have a 97 OBS f350 stroke here in pa you can't find a good set anywhere
If you need a set, email me at guyinwy at gmail. I’d be glad to grab some next time I’m out there and send them your way.
Good evening, I'm from Brazil and I was curious what year is this ford ranger and model, because I would like to put the safety belt on the back column where you released it before finishing, to have more security for those who are behind, thank you if you can tell me inform, and not forgetting it is possible to place this side glass but being from the mazda truck that opens on the ford ranger 97
Thank you for sharing, appreciate it!
Napa has the sealing tape, $18
Do not over lap the tape like that, thats most likely why your window was not sitting flush. Just butt the two ends tightly together.
It settled in flush with the nuts snugged down, but good tip for the future!
@@GuyinWY Keep up the great content man, I love it!
I found my window tape at NAPA.
My local store just had urethane windshield adhesive, which isn’t ideal for this job.
@@GuyinWY I have the perfect project for you, it's going cheap for you only. Read my comment I posted and let me know if your interested. Thanks for the shows Blake.
@Billy Elkins what brand of tape did you use?
My ACE hardware carries Butyel tape
Good job on that little window. U do very well at times. I was under the impression the Mighty F350 had minor issues. What ? Did u say OVERHAUL????? Lol
I thought u were gonna delete the white ram ? Still waiting
Lots of stuff is about to break loose I think.
Found you a gold mind
Great help!!
Looks like you have a little automotive repair shop there!😃 Btw, is the mic on your camera dirty or something. Lately the sound isn't that good which is a shame because I like this kind of video
Thank You 🙏🏽
Would this whole process work on a 1998 Ford Ranger?
Thanks for the video!
Nice, thanks
Hi Do you no how to remove the molding division that goes on top of the window of the ford f150 1991
By the way very helpful video Think you so much
Your link says it’s for a windshield?
Blake how about Steele rubber?
Thanks!
What size of butyl tape?
Thanks for info .
You did a perfect splice but your butyl tape was a little too thick. It can be pulled and stretched out...Normal sizes are 3/8, 5/16, 1/4 round or square.....
How much arw those windows
oh boy first today!!!!!!!!!!
Go to a dealership i know Chrysler dealers have it
Blake
Mike awesom Steele rubber products
First but don't care.