TRMS Clamp meter | HTC Instruments CM2016 | How to use in Tamil
Вставка
- Опубліковано 14 жов 2024
- #CLAMP METER
#HTC_Instruments
#HTC_CM2016
#Budget_Clampmeter
#Featured_Clampmeter
#AC_current_measurement
#DC_current_measurement
#auto_ranging_meter
#600A_current_measurement
#frequency_measurement
#temperature_measurement
#capacitance_measurement
#diode_test
#ncv
#true_rms_meter
#auto_power_off
#relative_measurement
Follow our channel #NammaVeetuVinghyaani
HTC Instruments CM-2016 600A AC/DC Clamp Meter
*****************************************
ONLINE BUYING LINK
TOOLWORLD : www.toolworld....
AMAZON : www.amazon.in/...
*****************************************
HTC Instruments DM 97 Multimeter Part 1
• TRMS multimeter | HTC ...
*****************************************
HTC DM97 Digital Multimeter advanced features
• TRMS multimeter | HTC ...
*****************************************
SPECIFICATIONS
Y6 Digit Clamp Meter with Backlight
5,999 Count & Polarity Display
Clamp Torch
Jaw Open : 28mm
Auto Power Off. (APO)
Duty Cycle / REL & Data Hold
Non Contact Voltage (NCV) 5 Ranges
True RMS- Reading
TECHNICAL DETAILS
DC Voltage: 600mV/6V/60V/600V
AC Voltage: 600mV/6V/60V/600V
DC Current: 600A
AC Current: 600A
Resistance: 600/6k/60k/600k/6m/60m
Capacitance: 60nF/600nF/6uF/60uF/600uF/6000uF
Frequency: 20 Mhz
Temp: (-40- 1000) Celsius
Sampling- 3/Sec
AC Frequency: 50- 400Hz
Power: AAA X 2
Diode Test
Function Protection
Continuity Buzzer
STANDARD ACCESSORIES
*Soft carrying case
*User manual
*Test lead
*TP04 Temperature probe
DIMENSIONS
35(H) X 123(W) X 270(D) mm
Instagram profile link
...
Very thank you Sir and can you help me informing one thing that is , when I am measuring ac current with 100 watt bulb the current consumption should be 450 milliamps for 100 watt bulb but this clamp meter is showing 100 milliamps. Here difference is 300 milliamps from actual consumption to htc clamp reading. can you cheek this it, is that happening to your meter or not ? If you inform me then it will be very helpful for me.
1. Check whether AC mode is selected before measuring (press "select" button once)
2. Press "range" button once and then measure the same
@@nammaveetuvinghyaani2040 sir I have done it many times result is same. Sir can you check this for once using your meter with 100 watt bulb. ?
sir is there is any problem of mismatch in ampere reading when connecting to the positive or negative wire because i get different reading in different wire
No there shouldn't be any difference except the polarity sign for DC measurement.
If the issue persists, press the delta symbol which removes fluctuation and puts the meter to zero. Then start measuring and if same issue persists, try it with different power sources.
Even after the same issue repeats then try calibrating the meter with service team support.
Bro dc clam meter vangalanu irukken
Intha HTC CM2016 vangalama 36 BL vangalama bro
hi sir your videos are very helpful for me and i want to know which is the best among 3 models
CM2016, CM2046, CM2056. could you tell me the cheapest AC/DC AMP CLAMP METER in any other brand waiting for our reply thankyou
Cheapest would be HTC CM2016
But featured will be HTC CM2056 sir
HTC will be the cheapest and featured of all brands available in market
@@nammaveetuvinghyaani2040 thanks again for your reply
This is really good explanation da. I would suggest you to explain why and how they can be used and then go deeper because the ones who doesn't belong or have studied this could not get it in the first time
Sure da I'll take ur words n incorporate it in my upcoming videos
Sir, I have purchased this meter and how will I understand battery is charging and drawing current to run inverter?
1. The left of Jaw clamp meter sign is positive what is reason?
2. When you was checking ampere at battery right side it was showing negative ampere and right side positive , can you explain this clearly?
Congradulations on ur purchase
1. The +ve sign on left jaw is for denoting the electron flow direction (i.e: if a DC current is measured, it'll indicate the current flow direction)
It is not left jaw for +be and right jaw for -ve, but the entire top surface will be +ve and bottom side will be -ve
2. I was measuring my UPS, when my battery was charging
That right side and left side of battery measurement is nothing but the entire clamp meter will get changed for holding the wire
So when I placed my meter's clamp at first it showed a -ve symbol and it's because I placed it opposite to current flow (since it was charging current flow is from UPS to battery)
Later when I revered the clamp no -ve symbol was shown since it's inline with the current flow
Brother accuracy Apdi iruku, warranty iruka
Capacitor relative measuring ∆
Clearly explained and very useful Prasana..expecting more videos😇
Tqsm 😇
Overload protection yes no and bazzr mode test ac metre was dead yes no
Bro please tell me about low AC current values( 0.1 A to 2 A) accurate?
My 150 rupee meter is giving me accurate voltage, I compared it with the TNEB energy meter.
My requirement is to measure current drawn by appliances 10 W to 200 W.
Will it do that accurately?
I bought metravi dt 725 and it was not able to read low AC currents, returned it,,,
For lower current measurements u should go for a multimeter and not a clamp meter
Kindly check out my video on HTC DM-97 multimeter
ua-cam.com/video/Qv09MWEadRM/v-deo.html
This will give u expected accuracy
Enga vaangurathu bro
Very useful video keep rocking bro.. 😇
Tq thambi 😇
Sir is it working properly now
Yes sir it's working properly till now,
@@nammaveetuvinghyaani2040 ac&dc ampher
Yes sir
Semma Bro..👏👏 how to contact you bro..?
Instagram page bro
Sir u check capacitor valu not correct one capacitor up valu one capacitor down valu not correct valu i am general motor problem attand work main capacitor chek frequently chek so u meter fan 2.5 capacitor. Chek correct not correct please reply
Sir all capacitors are manufactured with a tolerance value (differs from value mentioned in capacitor)
So this meter gives actual value
Example : for 10microF capacitor it may have 5-10% deviation so meter reads 9-11microF
Which is not meter fault
For any capacitor according to its manufacturer has a deviation (tolerance value stated in %)
@@nammaveetuvinghyaani2040 ok thanks இந்த மீட்டர் வாங்கலாம நல்ல இருக்க நான் கெப்பாசிட்டர் அதிகமாக chek பண்ணுவேன் வாங்கலாம pleases reply
S sir, but what is your capacitor measurement range?
This meter is measures between 60nanoF to 6000microF
And if you want to go beyond 6000microF then please checkout for HTC DM-97 multimeter
Congratulations for 1k na...😍
Tnx da thambi 😉
Keep it up da 💥💥💥👍🏻👍🏻👍🏻
Tq da for sure 😇
Sir, I had buyed the same clamp meter, While seeing ammeter reading its showing - 6.8 amp . Whats that?
R u measuring any live wire current? Or is it showing that 6.8 Amps without checking any load?
How is accurate this clamp meter for all measurement ? and is it reliable for long lasting ?
For AC/DC current measurement it's accuracy is +/- 2% and for capacitance it's +/- 3-5%
+/- 1% for everything else
@@nammaveetuvinghyaani2040 Can this meter measure to 100 to 1000 milliamps ? can you check this using this meter for milliamps and you can reply me here if it measure below the 1 ampere.
No this meter is not for Milli & micro Amps measurement
100mA is the least resolution
It can measure anything above 100mA
Where is the product made in ?
It is a Mumbai based manufacturer, started in 2008
V useful.
Good work
Tq sir 😇
Meter still working?
S sir it's working fine,
@@nammaveetuvinghyaani2040 thanks for this information 🙏
Don't know Tamil. Is it available in English?
We are really sorry for the inconvenience sir, but the channel is intended in conveying the Engineering concepts in Tamil
We will try to put a subtitle at the earliest sir
Well Explained
Tq da thambi
Price
Range button anik puriyile
Well explained😇 👌
Tq 😇
Anna keep going 🔥🔥🔥🔥🔥🔥
Sure sis tq 😇
Pl. translate in English it will attract all people of our country who are interested like me.
Tq for your valuable comment,
But this channel is intended in delivering tech contents in Tamil, but will surely add subtitle at the earliest,