Commerical Mower Spindle Rebuild
Вставка
- Опубліковано 29 лис 2024
- amzn.to/3fsfREu Non Aerosol Spray Can
amzn.to/3uUdlgq Milwuakee Fuel 1/2 Hi Torque Impact Gun
amzn.to/3breeFG 10' chain hoist 1 ton
amzn.to/3htaGXc Spindle Bearing Kit
amzn.to/2SWuaJJ Loctite Red
amzn.to/3bwsgFZ The Right Stuff RTV sealant
In this video, we replace the bearings in a tractor blade spindle.
Help support Doublewide6 Repairs LLC by sponsoring his Patreon Account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.
Tools and Parts:
amzn.to/3fsfREu Non Aerosol Spray Can
amzn.to/3uUdlgq Milwuakee Fuel 1/2 Hi Torque Impact Gun
amzn.to/3breeFG 10' chain hoist 1 ton
amzn.to/3htaGXc Spindle Bearing Kit
amzn.to/2SWuaJJ Loctite Red
amzn.to/3bwsgFZ The Right Stuff RTV sealant
Thank God there's still some fathers teaching their boys lessons on transitioning from boys to men. It's rare. I sure was blessed to have my daddy in my life to teach me things like this.
It was great having your Son help you with the job. Good work Bobby.
I’m happy seeing the young man learning from Dad, that’s how it’s supposed to be ❤
Very nice having your son going hands-on with you DW, its these small things he'll remember you for in years to come. Thanks for being that special daddy, wish there were many more out there. Keep it up bud, you make a difference for all of us.
🙄🫨cutoff wheel an air chisel cheaper to buy a bearing puller an not damaged shaft with cutoff wheel . Remove inner seals an ad a grease fitting give ten times longer life when you can grease the bearings regularly
Nice having your son helping in the shop. I lose my helper to video games as well. Hope we can keep them interested in learning how to..... I have rebuilt sever decks using the same approach on Craftsman, Yard Machines etc. Not worth buying new decks or spindles for these units. Haven't repaired any zero turn decks yet. But as more & more home owners are buying them it won't be long.
Stay safe, Joe Z
Great to see Bobby helping you in the shop. Good to see him doing well. I think I like the spindle design om my Exmark better that on that Kubota. I have only had to replace the bearings on one spindle on my 2003 Turf tracer and haven't had to replace any on my Zero turn yet. Hope every one is doing well. Have a great day. God Bless!
I watch all your videos and glad to see Bobby doing so well the kids sure grow up fast .keep up the great videos.
Good to see the lad helping you out.. another professional job done.. wow That's expensive for a pulley.
Good one Bob! After watching you use your chain fall for several jobs I did the same thing in my garage...what a difference...no jacks, jack stands or blocking needed. Thanks!
Still use jack stands, my chain block failed and unwound itself. No tool with moving parts is infallible
@@bruceaskin9645 Point taken, thank you!
Yikes, loctite on bearings. Never seen that before. Pitty the next guy changing those bearings out.
GREAT FIX MY FRIEND .AWESOM FROM DOUG
The wire wheel, one of the most useful tools in the shed. Use mine everyday for something
Top work Bob . Good to see your son .
Expensive spindle that is no longer available. Sounds like planned obsolescence.
That chain hoist looks like it earns its keep! Nice to be able to lift from above the machine, instead of blocking your access beneath the machine. Kind of surprised to see you driving a bearing by its inner race, though, yikes!
Awesome video! Who plays video games instead if playing in that Awesome shop!
good helper knows his tools
That is a good fix for a part being $240 thats crazy at least u had bearings on hand to fix it there for awhile
Nice repair. Thanks for posting
Great job
Why did you use Red Loctite instead of Blue? Not having any grease fittings, it appears that the next person to work on it will even have more trouble.
Using that wood chisel to try and drive the bearing shell out hurt
good job guys.
Hi mr Ur my tech Ed teacher
I’ve never heard of 50/50 acitone. What is it?
Is there a dust cup shield missing? The older zd331 and 326 I’ve worked on have a dust cup shield between the blade bearing housing.
nice video
so are the bearings in the description the ones you used or different ones? because the numbers are not the same?
should you press the bearings into the spindle using the inner race or the outer race?
outer
Outer! Cringed like crazy watching the hammering. That will brinell a bearing quick. Then you get to find out how much heat it takes to break the bond of red loctite!
Both, make 1/4" thick washer O.D. undersized, bore oversized
Should remove the inner bearing seal and install a zerk on the housing.
Dad. Don’t stop the kid from working. Just wait and let him learn. That’s what I think 🤔
Not being a ahole but it’s worth your time
chances are the other two spindles aren't too far behind that one...
Loctite and silicone do not mix .
Kubota an Husqvarna are not in the same quality Husqvarna is cheap manufacture vs Kubota