I have the same issue 20 times over in my yard from 2 massive 80' silver maples. The reason I haven't done the same thing is that those roots are anchor roots. They keep the trees from falling over in high winds. My plan is to regrade top soil around the roots. It's a lot less risky than removing the roots.
I have had the same problem for years with a pine tree but the hurricane blew the tree down two and a half years ago so now I will deal with the root this way.
I am a low-tech tiller (and an older woman, so the work goes a bit slow). My tools are initially a shovel and I try to pull up the roots high as I can (if I can) and expose them as much as possible on sides and underneath. Most of the ones I am dealing with are less than an inch diameter and of course the thicker they are the harder to deal with. I have a hard mallet (of hard plastic) and a heavy butcher knife that I used in the past to open those white Thai coconuts. You set the heavy knife on the coconut and steady it and bang, bang, bang over the top of the knife blade. It works. I resorted to that on a root a neighbor was going to help me with (but wasn't sure he was going to show as he was a day late) and I tried this method and was able to cut through the root. Fantastic! I'll be doing that again in my backyard tomorrow. For thinner roots I use a pair of hedge clippers. Shocking how many roots there are to deal with! Can't afford machinery and enjoy working in the yard, so it all works out.
You put a blade under your exposed root? Can you elaborate because I’m trying to remove a mini bamboo Forrest in my landlords yard here in Florida. Thank you
@@SunofYork Proof of suffering and mystery in this world is NOT proof there is no God. It IS proof we live in a fallen world, where for example large companies full of greed and ulterior motives poison our food, the drugs they sell for ridiculous amounts and more. Cancer even in children is proof of evil in this world -- a highly intelligent and psychopathic evil.
South GA resident here.....alot of my cypress knees around my ponds are pretty and out of the way but some are constantly getting shaved down with my mower. Will definitely be using this method rather than risking breaking a spindle! Thanks for the idea!
Here in South Texas we use the flat end of a pick axe or garden planter ($15.99 harbor freight tool). Takes 2 minutes to work on those roots you had. But this is good too.
This is a great idea for the roots you just can’t get out. I use a sawzall with the new pruning blades, they don’t get wiped right away when you hit the dirt. It does a great job and then this would sure do a hell of a job finishing off the leftovers. Thanks.
it is much faster to get a pick, sharpen it and cut off the root on both ends. Then use the pick to lift the section and lever the ground after. Works for me on cottonwoods. I removed roots 8 inches wide. Also, you can use farmer's jack and a piece of chain linked in a loop to lift the root if it is hard to lift with a pick
I watched your video and REALLY NEED YOUR ASSISTANCE! Can you tell me the model of the angle grinder and approx how much it is? Also does it automatically come with the diamond circle that grinds….or will I have to ask Lowes for it? If I have to ask, can you tell. Me how to identify the item to tell the Lowes worker what I will need? I have a piece of a tree root that unbeknownst to me has circled in one of my metal dog kennel panels. I have tried a hand drill, an axe, a small saw and am considering burning it in a small fire….but I’m afraid of it leading to a LARGE fire that I wont be able to control. Im a woman and am not adequately enough familiar with tools to to know what my best option will be. I have tried until I was drenched in sweat and had to stop. Please tell me what to do. I didnt know the damn roots could encircle a kennel panel….
@@1lightspeed If you haven't already found out, it will take forever to try to burn those roots down. It's a physics phenomenon like trying to burn a dollar bill when it's wrapped around steel. You'd be better off smearing peanut butter on it every day and letting the wood peckers take it down.
I found it much easier to just use my stump grinder or fecon. I will admit the fecon digs up an 8ft wide section of yard and doesn’t go as deep n precise as the stump grinder though 😆
Bro. This is genius. If you saw how many pine trees with roots I have in my yard and how many mower blades it has cost me in 17 years, you’d be so happy for me. I’m going to get this tomorrow morning. YOU ARE THE MAN! 👊👊👊👊👊
This was a fantastic idea. I have about 30 tree roots in my front and back yard and they're tearing up my mower. Just ordered the tools for this and can't wait to finally get rid of them. THANKS!
This is brilliant. I have live oak roots that I have dulled axes and chainsaw blades on. That wheel is made for rock so the dirt shouldn’t dull it. I’m glad I accidentally came across this! Guess I’m adding one more thing to my things to get done tomorrow now.
Nice if you like looking at them , I just used a reciprocating saw on my exposed ends, wet the ground and the ones I could not pull up by hand I used a farm jack , less than half hour easy work . and some were a foot round .
I've had the same problem for years. I'm going first thing in the morning to get one of those heads. I've chopped them with an axe and even used a wood chisel trying to get rid of these roots. Thanks for the idea and the video. Greetings from New Site Ms.!
I like the way you think and talk. You’d be a great neighbor. The part about you having only one yard with thousands of exposed roots and that you wouldn’t care if you had a thousand yards with one root made me laugh out loud and I don’t do that very often. I’m gonna hang around cause you seem like a no nonsense/with humor kind of guy I can identify with. Thanks mate.
Thank you for watching and the feedback Robert. If my neighbors sale their house I'll let you know. You seem like you would be a great neighbor as well lol thanks again brother and God bless
@@YardEnvy …….yes, let me know, heh heh heh. And May God shine his face and favor on you and your family in the time to come. Merry Christmas and a Happy New Year friend.
This is a great solution. My issue is with roots headed toward the sidewalk/concrete damage, but used in combination with cutting some out and grinding others down, this should work well! Thanks for posting.
I use my cordless sawzall with a diablo pruning blade (9 or 12" about $2 ea. ) to cut out my maple tree roots. Works really good. You can plunge the blade into the ground to make the cuts. Then pull the root section out and backfill/seed. I've cut roots up to 5-6" diam.
@@meabob I ordered mine from Home depot online. This was probably a couple years ago. I paid $10 for the 5pk of 9" pk and $15 for the 5pk of 12" but I see HD doesn't offer them anymore. I see Acme Tools has the 9" 5pk for $13 and the 12" 5pk for $20. These are the Diablo Fleam pruning blades.
I do have a sawzall but do not have that thingy this man used. I’m an old lady with no upper body strength so I’ll have to find a “friend” to help me. Pine roots are taking over my front lawn but don’t want to cut trees.
I bought a disc like yours for my 7 inch grinder, it worked, but was slow. I got out my 7 1.4 inch saw, I had the blade set to one quarter of an inch, I made a cut, and then moved the saw side ways. That worked better for me. Take it easy, so you don't cut your self. John
@@cbr1thouI have taken out some major rocks building a fire on the rocks, removing the coals, applying water, using sledge and then repeat. You can have a truck loaded down with rock in no time.
Friend, thanks for this tip. We took down an ancient ash tree in the front yard and even though we had the stump ground down, the darned roots are starting to surface as the ground settles. They really do play hell with mower blades.
Haha! Da ending!!! I thought I moved to a quiet cul-de-sac 8 yrs ago... nuthin but NOISE. 4 wheelers, motorcycles in da driveway... barking out of control dogs and fights between Father and son! He's a single father, so gave him a lot of slack... now I know he's da problem! Tree roots are the least of my worries!!! Haha... great video... gonna give it a try.
Fantastic! I love it! I have always wondered what the heck i was going to do with the HUGE bayon tree roots! and here i have had all the tooling in the garage to begin with long ago. Thank you, GREAT video!
Effin genius. I have an angle grinder and a similar disc for concrete. There are a few tree roots lifting my driveway apron and I've been contemplating how to address it. Will give it a shot. Thanks for sharing.
A nice idea and I went out and bought a grinding wheel to try on a root that has annoyed me for years. It does work but it is much slower to achieve the desired result than expected. After a while it occurred to me that it would be much easier simply to use my Bosch three inch hand held planner. This worked spectacularly well in half the time and gave a much more consistent finish. Thanks for the video as it helped me to think about the problem and how to deal with it.
@@darktoadone5068 Hi, My planner is an old Bosch PHO 15-82. It is rated at 500 watts 2.8 amps. It is however 240 volts as I live in Scotland. Hope that helps.
I invested in one of those high-priced disks, and the process of shaving down the Silver Oak roots was incredibly time-consuming. It turned into a labor-intensive task that felt more frustrating than productive, especially since I had to deal with an electric cord that limited my movement. In hindsight, I realized that using a battery-powered reciprocating saw would have been much more efficient. Not only is it faster, but the blades for this type of saw are also more affordable, making it a far better option for tackling such tough work.
That Allet is nice! Here I also took the tree roots out. Well actually, I used an axe and took it all out. the whole lawn was tree roots. So when I installed the irrigation I had to cut most of the roots. And then after seeding and all, I came back with the axe to take a few larger roots I left. I was tired of hitting the roots with my mower. lol. And I didn't notice any stress on the trees. That said it was in the fall and I also trimmed the trees.
I have a Kutizall very coarse Extreme disc (the black one) and it won't do what that thing did. I'm getting one like this used. And the chainsaw one dulls once you hit dirt and grinding roots, your''re gonna hit dirt.
That's what I do too. I just commented on this as well above. A Sawzall works wonders. I even but the Pruning blades on Amazon for them. It is like having a very light portable chainsaw.
I would have used a bench planer. Shaves off wood like butter. Adjust your settings I used it on my deck here. It’s easy for me as a woman to use but not many people know about it. Good to know about the tool you have… now I want one.
Interesting method. I had the same problem with some eastern whit pines. Dug out the turf around the roots put an ole blade on the Stijl and no more root. Did it 5 years ago a d the damn pine is healthy now with less roots. Haha.
I had an ornamental plum tree that had roots that were ruining my lawn, dropping messy little fruit and attracting messy birds and causing me to rake a ton of leaves. I had it cu down 3 years ago. Life is so much better, my lawn looks great, no leaves, no messy birds or unedible fruit.
Mini Stump grinder. I try to axe the root somewhere close to the tree to kill the root. I’m going to get one of those grinder disks. Those Magnolias are big leaf droppers. Great tip thanks.
Yes! any saw, ax. knifed, cutting tools are always dangerous; OK so i tried this on my craftsman cordless, and it seems to grind away the Red oak/Ohia hardwood pretty nicely; these however are NOT carbide teeth but do a great job on grinding hardwood stump like a fast file; I will try it again on the wet tree roots out in the orchid and will get back to you in a few days. but for right now it seems to be working pretty well
@@YardEnvy What I think he is describing is called a San Angelo It is my go to, especially for roots that come up and then go back down into the soil. Take the flat end of the San Angelo and run it down the top surface of the root until you are 2” below the surface of the soil, then thrust the bar into the root at an angle away form you. Much, much faster that the technique presented
I used a sander like that to level some concrete I patched. That sander with the right wheel is better than a sawzall. I've cut notches in cast iron pipe to snake out line when no clean out was available, also to replace rotted sections fast.
When you use the Scarifier on the Allett remove the static rake behind the front roller. Also make sure the Grass Box is resting properly on the tabs protruding from the cartridge for proper airflow and collection.
I got a Magnolia growing in my yard here in Fort Worth and the roots are trying to make it to heaven. I swear those suckers don't know which way to grow its like they go straight up. Ill give this a shot.
I appreciate that bit of info I deal with the same thing I’m going to lowes tomorrow and get one I’m tired of bouncing over thes toots an hanging my mower deck. Thanks again
So, the link he posted was to a $30 disk for sanding masonry. I found one for a lot less at around $10 that supposedly does the same thing. It worked "somewhat" on the roots but it took off very little very slowly so I gave up on it. Then I tried a "cut-off" wheel on the angle grinder, and it worked a little better. Then I tried my electric chainsaw and just lightly touched the end of the blade at a slight angle to "just the root" keeping it out of the dirt. The chainsaw did the trick and made quick work of the root issue. (pun intended). If you are slow and careful, the chainsaw is the way to go IMHO.
The key words in your post about using a chainsaw are 'keeping it out of the dirt'. Most people are not aware that you can dull a sharp chain in seconds once it hit the dirt. Just thought I would emphasize that for anyone wanting to go that route.
Thanks Koven!! Yeah when I saw this disc the idea hit me lol. I'm glad it worked. Also thanks for watching. Love your vids. I've been watching you since I got interested in all this.
Recently cut down a couple trees. Due to snow a couple high roots at the base were missed when stump grinding. Initially I was thinking belt sander until I saw this video and comment lol
That was great! I was going to use my chain saw to gradually shave the roots to ground level. But that grinding wheel seems a lot safer. Thanks for the tip! Also, I don’t think that would damage the tree because it wouldn’t be any different than cutting off a branch.
I had thought about using one of those chainsaw discs but I already have a couple of the concrete discs, so I'll give those a try first. That chainsaw disc kind of makes me nervous. LOL
Actually, this would be a great way to introduce decay and root rot into the tree, which down the road, can compromise structural integrity of the roots and make a tree fall right over. He mentioned putting dirt down at the end. That's the real solution in the first place. Put down dirt so that the root is buried, then put new grass over that.
@@ninascherry3274 Cutting or grinding into wood, whether it's a root, branch or otherwise is creating a wound. A wound creates an opening for infection and decay. Some trees handle decay well, others not so much. If enough root damage is done, the tree could eventually become unstable and collapse under the right conditions. To avoid any eventual risk, don't grind, and just cover root with dirt and grass seed.
GRAFF’s speed cutter 5” cutting disc with a wood shaping blade is also an excellent option. If the root is HARD wood it takes forever to grind it with this diamond blade. The speed blade can be extremely dangers to use so if you are not a DYI guy/gal with experience or comfortable with open blade tools, DO NOT USE, use caution ⛔️
@Rick-the-Swift I think you are right! I finally was able to get Maple tree roots off of at least three of my outdoor kennels. I used a reciprocating saw and it still took me three blades and thought I was going to die I got so hot! Hell I’m old….but Im moving soon and I need those kennels!
Thank you! I considered trying a chainsaw to bring the roots down, but this looks much easier to pull off. It doesn't remove all anchoring from the roots too, so win-win.
As a professional landscaping contractor, we use a sharp set of teeth on a stump grinder. Works fast, is far more safe using it than hand tools and offers an easier deeper cut if warranted. Next, clean up the wood shavings and dirty soil, lay down nice black topsoil and overseed the area. Perfect every time. The one thing we have to watch carefully is for cutting off too much of the supporting roots so that the tree cannot go over in a wind event or storm. We have a special procedure for this as well.
Was thinking this was the type of approach to take. Thanks for confirming. I have many more roots around my yard though. Whenever I cut a branch I typically use a pruning sealer. Was planning to seal all the roots I grind then put down sod and soil. Thinking the sealer might protect the tree if needed. 🤷♂️
I was thinking that this may be inviting pests and possible diseases into the roots of the tree, but not sure how much of a risk that is since it's only a few roots out of the gazillion the tree has
I bought the concrete disc and a wood carving disc from Harbor Freight, the wood disc is infinitely faster than the concrete disc. The wood carving disc will become dull after 15 minutes or so, just keep the grinding disc handy and re-sharpen it with a quick hit on each tooth and go for another 15 minutes. No idea how many roots and brush stubs I cut in a couple of hours, but well over 200' of fence line.
You win the Nobel Prize for putting the coolest thing on a sander that's not sanding discs.
You can also use a reciprocating saw. Cut into sections and then pry up with a pick axe or digging bar. Then fill with topsoil. Worked well for me
I do it the same way with reciprocating saw! Works for me!
Much better than leaving them in the yard like the video showed. Grinding them down level looks like horse manure.
Make Sure you buy carbide tipped reciprocating blades.
@@c50ge why?
@@Shubbyshoinks
They will last much longer when you are cutting in the dirt
A grinder is the most useful tool to have, I have just learn a new use for it, Thank You.
I have the same issue 20 times over in my yard from 2 massive 80' silver maples. The reason I haven't done the same thing is that those roots are anchor roots. They keep the trees from falling over in high winds. My plan is to regrade top soil around the roots. It's a lot less risky than removing the roots.
Sometimes you have no choice. Roots in our front yard are about to clash with our driveway so they got to go!
Hey, do those roots come up for oxygen, or is it just a grading issue? Thanks 👍
Aerate around the base really well with an airspade
Thanks it works very well!! Stump grinder one day rental $100. Grinder attachment $65 and will last good while.
I have had the same problem for years with a pine tree but the hurricane blew the tree down two and a half years ago so now I will deal with the root this way.
I am a low-tech tiller (and an older woman, so the work goes a bit slow). My tools are initially a shovel and I try to pull up the roots high as I can (if I can) and expose them as much as possible on sides and underneath. Most of the ones I am dealing with are less than an inch diameter and of course the thicker they are the harder to deal with. I have a hard mallet (of hard plastic) and a heavy butcher knife that I used in the past to open those white Thai coconuts. You set the heavy knife on the coconut and steady it and bang, bang, bang over the top of the knife blade. It works. I resorted to that on a root a neighbor was going to help me with (but wasn't sure he was going to show as he was a day late) and I tried this method and was able to cut through the root. Fantastic! I'll be doing that again in my backyard tomorrow. For thinner roots I use a pair of hedge clippers. Shocking how many roots there are to deal with! Can't afford machinery and enjoy working in the yard, so it all works out.
You put a blade under your exposed root? Can you elaborate because I’m trying to remove a mini bamboo Forrest in my landlords yard here in Florida. Thank you
There is no god...hence childhood cancer
@@SunofYork Proof of suffering and mystery in this world is NOT proof there is no God. It IS proof we live in a fallen world, where for example large companies full of greed and ulterior motives poison our food, the drugs they sell for ridiculous amounts and more. Cancer even in children is proof of evil in this world -- a highly intelligent and psychopathic evil.
South GA resident here.....alot of my cypress knees around my ponds are pretty and out of the way but some are constantly getting shaved down with my mower. Will definitely be using this method rather than risking breaking a spindle! Thanks for the idea!
Here in South Texas we use the flat end of a pick axe or garden planter ($15.99 harbor freight tool). Takes 2 minutes to work on those roots you had. But this is good too.
This is a great idea for the roots you just can’t get out. I use a sawzall with the new pruning blades, they don’t get wiped right away when you hit the dirt. It does a great job and then this would sure do a hell of a job finishing off the leftovers. Thanks.
What brand sawzall do you have?
it is much faster to get a pick, sharpen it and cut off the root on both ends. Then use the pick to lift the section and lever the ground after. Works for me on cottonwoods. I removed roots 8 inches wide. Also, you can use farmer's jack and a piece of chain linked in a loop to lift the root if it is hard to lift with a pick
I use the same method on roots in our local mtn bike trail, works great. I have a special tool just for that.
I watched your video and REALLY NEED YOUR ASSISTANCE! Can you tell me the model of the angle grinder and approx how much it is? Also does it automatically come with the diamond circle that grinds….or will I have to ask Lowes for it? If I have to ask, can you tell. Me how to identify the item to tell the Lowes worker what I will need? I have a piece of a tree root that unbeknownst to me has circled in one of my metal dog kennel panels. I have tried a hand drill, an axe, a small saw and am considering burning it in a small fire….but I’m afraid of it leading to a LARGE fire that I wont be able to control. Im a woman and am not adequately enough familiar with tools to to know what my best option will be. I have tried until I was drenched in sweat and had to stop. Please tell me what to do. I didnt know the damn roots could encircle a kennel panel….
@@1lightspeed If you haven't already found out, it will take forever to try to burn those roots down. It's a physics phenomenon like trying to burn a dollar bill when it's wrapped around steel. You'd be better off smearing peanut butter on it every day and letting the wood peckers take it down.
This is the perfect time to rent a couple goats 🐐🐐🐐🎉
I found it much easier to just use my stump grinder or fecon. I will admit the fecon digs up an 8ft wide section of yard and doesn’t go as deep n precise as the stump grinder though 😆
Bro. This is genius. If you saw how many pine trees with roots I have in my yard and how many mower blades it has cost me in 17 years, you’d be so happy for me. I’m going to get this tomorrow morning. YOU ARE THE MAN! 👊👊👊👊👊
How did it go?
Aerate around the base of trees with an airspade and do deep watering at the base... fix the cause not the result.
This was a fantastic idea. I have about 30 tree roots in my front and back yard and they're tearing up my mower. Just ordered the tools for this and can't wait to finally get rid of them. THANKS!
How’d it go
@@tysonkuresa5830better off to get a stump grinder.
This is brilliant. I have live oak roots that I have dulled axes and chainsaw blades on. That wheel is made for rock so the dirt shouldn’t dull it. I’m glad I accidentally came across this! Guess I’m adding one more thing to my things to get done tomorrow now.
Nice if you like looking at them , I just used a reciprocating saw on my exposed ends, wet the ground and the ones I could not pull up by hand I used a farm jack , less than half hour easy work . and some were a foot round .
I've had the same problem for years. I'm going first thing in the morning to get one of those heads. I've chopped them with an axe and even used a wood chisel trying to get rid of these roots. Thanks for the idea and the video. Greetings from New Site Ms.!
Thanks Jack
I like the way you think and talk. You’d be a great neighbor. The part about you having only one yard with thousands of exposed roots and that you wouldn’t care if you had a thousand yards with one root made me laugh out loud and I don’t do that very often. I’m gonna hang around cause you seem like a no nonsense/with humor kind of guy I can identify with. Thanks mate.
Thank you for watching and the feedback Robert. If my neighbors sale their house I'll let you know. You seem like you would be a great neighbor as well lol thanks again brother and God bless
@@YardEnvy …….yes, let me know, heh heh heh. And May God shine his face and favor on you and your family in the time to come. Merry Christmas and a Happy New Year friend.
This is a great solution. My issue is with roots headed toward the sidewalk/concrete damage, but used in combination with cutting some out and grinding others down, this should work well! Thanks for posting.
I use my cordless sawzall with a diablo pruning blade (9 or 12" about $2 ea. ) to cut out my maple tree roots. Works really good. You can plunge the blade into the ground to make the cuts. Then pull the root section out and backfill/seed. I've cut roots up to 5-6" diam.
you got Diablo blades for $2? Where? I love those blades but they cost me $6 for 9 inch and $8 for 12 inch.
@@meabob I ordered mine from Home depot online. This was probably a couple years ago. I paid $10 for the 5pk of 9" pk and $15 for the 5pk of 12" but I see HD doesn't offer them anymore. I see Acme Tools has the 9" 5pk for $13 and the 12" 5pk for $20. These are the Diablo Fleam pruning blades.
I'll do that in the follow up video George. Thank you. May even give you a shout out. 👍
I do have a sawzall but do not have that thingy this man used. I’m an old lady with no upper body strength so I’ll have to find a “friend” to help me. Pine roots are taking over my front lawn but don’t want to cut trees.
Use a carbide tipped blade.
I bought a disc like yours for my 7 inch grinder, it worked, but was slow.
I got out my 7 1.4 inch saw, I had the blade set to one quarter of an inch, I made a cut, and then moved the saw side ways.
That worked better for me.
Take it easy, so you don't cut your self.
John
Thanks for the idea! With this being a masonry tool, it should also help with the large protruding rocks in my yard.
Sledge
@@cbr1thouI have taken out some major rocks building a fire on the rocks, removing the coals, applying water, using sledge and then repeat. You can have a truck loaded down with rock in no time.
Friend, thanks for this tip. We took down an ancient ash tree in the front yard and even though we had the stump ground down, the darned roots are starting to surface as the ground settles. They really do play hell with mower blades.
Thanks for watching Ken. In done cases you may want to use a sawzall to cut them and rip them up
What a great tool. I have 7.5 grinder I used for cleaning mortar with a diamond blade like yours. I was going to get rid of it. Thanks
Haha! Da ending!!! I thought I moved to a quiet cul-de-sac 8 yrs ago... nuthin but NOISE. 4 wheelers, motorcycles in da driveway... barking out of control dogs and fights between Father and son! He's a single father, so gave him a lot of slack... now I know he's da problem! Tree roots are the least of my worries!!! Haha... great video... gonna give it a try.
Fantastic! I love it! I have always wondered what the heck i was going to do with the HUGE bayon tree roots! and here i have had all the tooling in the garage to begin with long ago. Thank you, GREAT video!
Thank you Ray! Did it work?
Thank you for the magnificent way of removing roots from the lawn. I am going to buy the tools tomorrow. Thank you!!!
Effin genius. I have an angle grinder and a similar disc for concrete. There are a few tree roots lifting my driveway apron and I've been contemplating how to address it. Will give it a shot. Thanks for sharing.
A nice idea and I went out and bought a grinding wheel to try on a root that has annoyed me for years. It does work but it is much slower to achieve the desired result than expected. After a while it occurred to me that it would be much easier simply to use my Bosch three inch hand held planner. This worked spectacularly well in half the time and gave a much more consistent finish. Thanks for the video as it helped me to think about the problem and how to deal with it.
Awesome! Hey if nothing else I got your wheels turning lol. Glad I could kinda help👍. Thanks for watching
How many amps is your planner, mine is only 4. Do you think that would work?
@@darktoadone5068
Hi,
My planner is an old Bosch PHO 15-82. It is rated at 500 watts 2.8 amps. It is however 240 volts as I live in Scotland. Hope that helps.
Never thought about your application, creative...I feel the same way about trees & the mess they make for me in my pool. Have a good summer.
Thank you, and you too John
I invested in one of those high-priced disks, and the process of shaving down the Silver Oak roots was incredibly time-consuming. It turned into a labor-intensive task that felt more frustrating than productive, especially since I had to deal with an electric cord that limited my movement. In hindsight, I realized that using a battery-powered reciprocating saw would have been much more efficient. Not only is it faster, but the blades for this type of saw are also more affordable, making it a far better option for tackling such tough work.
Mildly satisfying to watch. I cannot wait to do this in my own yard! Roots be damned. I will prevail. Thank you!
Your welcome Amanda. Thank you for watching!
High five. I'm on it too 😉
That Allet is nice! Here I also took the tree roots out. Well actually, I used an axe and took it all out. the whole lawn was tree roots. So when I installed the irrigation I had to cut most of the roots. And then after seeding and all, I came back with the axe to take a few larger roots I left. I was tired of hitting the roots with my mower. lol. And I didn't notice any stress on the trees. That said it was in the fall and I also trimmed the trees.
Wood carving discs for angle grinders are also an option. They're a metal disc with chainsaw chain about the circumference.
I have a Kutizall very coarse Extreme disc (the black one) and it won't do what that thing did. I'm getting one like this used. And the chainsaw one dulls once you hit dirt and grinding roots, your''re gonna hit dirt.
@@bltefft thank you for this comment. Saved me from wasting $60
Good way to control roots without pulling them out and at the same time still hold the main structure of the tree ❤👍
In the past I have used a sawzall with an aggresive Diablo blade and perhaps a little digging to get the root out. No more!! Thanks to your video.
Awesome, thanks for watching Sam!!
That's what I do too. I just commented on this as well above. A Sawzall works wonders. I even but the Pruning blades on Amazon for them. It is like having a very light portable chainsaw.
I use the sawzall on smaller roots, but I’ve got some 6” that I think the grinder will do better, to take off a inch or 2, if I can find the disc?
Nice ! Not only roots but also for grinding and trimming down thick branches and shit ! Thanks !
Looks like a great way to take care of a problem most people have, thanks for sharing.
Count me in too but apparently not any of those from the tv show Sharks ‘cuz they turned the guy who put together Roothog down.
Thank you for what I hope is the answer to my Cyprus knees/roots!
It's essentially a hand-sized stump grinder. It works the exact same way.
I would have used a bench planer. Shaves off wood like butter. Adjust your settings I used it on my deck here. It’s easy for me as a woman to use but not many people know about it. Good to know about the tool you have… now I want one.
Spray a little medium green paint on those roots and when the grass fills in, Bam! Looks good and no roots! Great video!
Thank you
I just want to thank you and appreciate you I just bought a home and there is roots sticking up out of the grass big ones
If they are bigger than the ones I have you may want to use a sawzall to cut into them and pull out the large pieces
Those blades are pretty expensive, but I can't be against your creativity. Thank you for sharing.
Thanks for watching Sebastian
You can get them for $10
Interesting method. I had the same problem with some eastern whit pines. Dug out the turf around the roots put an ole blade on the Stijl and no more root. Did it 5 years ago a d the damn pine is healthy now with less roots. Haha.
I had an ornamental plum tree that had roots that were ruining my lawn, dropping messy little fruit and attracting messy birds and causing me to rake a ton of leaves. I had it cu down 3 years ago. Life is so much better, my lawn looks great, no leaves, no messy birds or unedible fruit.
Mini Stump grinder. I try to axe the root somewhere close to the tree to kill the root. I’m going to get one of those grinder disks. Those Magnolias are big leaf droppers. Great tip thanks.
Great idea! I did this to all the roots I could find in my neighborhood and then finished the job with napalm and cluster bombs. Those roots are gone!
Must have been some bad roots🤣🤣🤣🤣🤣🤣🤣🤣
Yes! any saw, ax. knifed, cutting tools are always dangerous; OK so i tried this on my craftsman cordless, and it seems to grind away the Red oak/Ohia hardwood pretty nicely; these however are NOT carbide teeth but do a great job on grinding hardwood stump like a fast file; I will try it again on the wet tree roots out in the orchid and will get back to you in a few days. but for right now it seems to be working pretty well
Try using a B'root bar root cutting tool. It's not for everyone but it's our go to tool in the fence industry.
Awesome! I'll have to check that out. Thanks Brad!
@@YardEnvy What I think he is describing is called a San Angelo
It is my go to, especially for roots that come up and then go back down into the soil. Take the flat end of the San Angelo and run it down the top surface of the root until you are 2” below the surface of the soil, then thrust the bar into the root at an angle away form you.
Much, much faster that the technique presented
I used a sander like that to level some concrete I patched. That sander with the right wheel is better than a sawzall. I've cut notches in cast iron pipe to snake out line when no clean out was available, also to replace rotted sections fast.
When you use the Scarifier on the Allett remove the static rake behind the front roller. Also make sure the Grass Box is resting properly on the tabs protruding from the cartridge for proper airflow and collection.
Thank you
Please put a link for where one might be able to find that disk?
Dude the pine tree is so beautiful.I hope you keep it
I got a Magnolia growing in my yard here in Fort Worth and the roots are trying to make it to heaven. I swear those suckers don't know which way to grow its like they go straight up. Ill give this a shot.
Lol yeah they can be a pain
I appreciate that bit of info I deal with the same thing I’m going to lowes tomorrow and get one I’m tired of bouncing over thes toots an hanging my mower deck. Thanks again
Did it work?
@@DAS-Videos yes it did thank you
Thanks for this, I'm going to do the same thing and bring them down a bit lower and dress them with top soil and seed. Great idea!
Thank you for watching gman
I’m looking for the grinder disc, I have tried TSC and Amazon, where can I get the disc?
I just used my axe the other day. I had no clue if that was going to work. BAM! All three gone in 20 minutes. They were about 4 inches in diameter.
Great idea! I have a similar situation in my Kentucky yard, where a tree was removed, but not all the roots.
So, the link he posted was to a $30 disk for sanding masonry. I found one for a lot less at around $10 that supposedly does the same thing. It worked "somewhat" on the roots but it took off very little very slowly so I gave up on it. Then I tried a "cut-off" wheel on the angle grinder, and it worked a little better. Then I tried my electric chainsaw and just lightly touched the end of the blade at a slight angle to "just the root" keeping it out of the dirt. The chainsaw did the trick and made quick work of the root issue. (pun intended). If you are slow and careful, the chainsaw is the way to go IMHO.
The key words in your post about using a chainsaw are 'keeping it out of the dirt'. Most people are not aware that you can dull a sharp chain in seconds once it hit the dirt. Just thought I would emphasize that for anyone wanting to go that route.
This a great idea. I tried using my belt sander, didn't work too well.
Thanks Koven!! Yeah when I saw this disc the idea hit me lol. I'm glad it worked. Also thanks for watching. Love your vids. I've been watching you since I got interested in all this.
Recently cut down a couple trees. Due to snow a couple high roots at the base were missed when stump grinding. Initially I was thinking belt sander until I saw this video and comment lol
Thanks for the video. I tried sharpening the azde on an axe mattock. Your way is better, faster and appears much easier.
That was great! I was going to use my chain saw to gradually shave the roots to ground level. But that grinding wheel seems a lot safer. Thanks for the tip! Also, I don’t think that would damage the tree because it wouldn’t be any different than cutting off a branch.
Exactly holiday. Thank you for watching
I had thought about using one of those chainsaw discs but I already have a couple of the concrete discs, so I'll give those a try first. That chainsaw disc kind of makes me nervous. LOL
Actually, this would be a great way to introduce decay and root rot into the tree, which down the road, can compromise structural integrity of the roots and make a tree fall right over.
He mentioned putting dirt down at the end. That's the real solution in the first place. Put down dirt so that the root is buried, then put new grass over that.
Wait are you saying doing all that grinding and putting dirt grasss seed over the grinded root would kill a tree like my 20 year maple tree😫
@@ninascherry3274 Cutting or grinding into wood, whether it's a root, branch or otherwise is creating a wound. A wound creates an opening for infection and decay. Some trees handle decay well, others not so much. If enough root damage is done, the tree could eventually become unstable and collapse under the right conditions. To avoid any eventual risk, don't grind, and just cover root with dirt and grass seed.
Great idea mate.
Wrecked my mower twice on holy roots now.Many thanks :^)
Your welcome Manic👍😎
Thanks for the tip mate- the bit about the wife's nail cracked me up
Lol thank you for watching Kevin
me too
Got a root problem myself. These South Mississippi pines don’t mess around.
@@hunterbeech6030 you right about that lol
If I tried that here in Kentucky somebody would call the law and tell them a meth head is mowing his yard with an angle grinder. Good idea by the way.
Lmfao...
lmao
🤣🤣🤣
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
OMG I got a kick out of that LOL dammit man
Thanks Kevin! Always a good time.
Man, this is a great idea, just what I was looking for
Thank you Raymond!
You got me with....."she had to get her nails done." The grinder, nice idea....thx!
Lol you know how they are🤣🤣
It's about 18 months since this video was posted. Can we get an update on how the roots reacted to the flattop haircut?
What about a sawzah
@@RJLM330 zawzall?
The tree got an infection and rotted and fell on the room where he slept. R.I.P.
Had to go to Treehab.
That's great information, I have hit my lawn mower so many times on my fruitless mulberry tree, thanks.
Your Welcome👍
I have that same problem in my yard! Thanks for posting this.
Thank you for watching Andrew
My exact issue in my lawn...I've used a hand chisel to a chainsaw to help me manage/control my tree roots...will give this a try.
GRAFF’s speed cutter 5” cutting disc with a wood shaping blade is also an excellent option. If the root is HARD wood it takes forever to grind it with this diamond blade. The speed blade can be extremely dangers to use so if you are not a DYI guy/gal with experience or comfortable with open blade tools, DO NOT USE, use caution ⛔️
Mini handheld stump grinder! Genius!
Lol
I love what you did with the grinder. Need to get me one
It works great, Thank you for watching!
@@YardEnvy no problem have you on lock to receive all your videos
@Rick-the-Swift
I think you are right! I finally was able to get Maple tree roots off of at least three of my outdoor kennels. I used a reciprocating saw and it still took me three blades and thought I was going to die I got so hot! Hell I’m old….but Im moving soon and I need those kennels!
I don't mow trees - I mow grass 😂😂😂
Thank you! I considered trying a chainsaw to bring the roots down, but this looks much easier to pull off. It doesn't remove all anchoring from the roots too, so win-win.
As a professional landscaping contractor, we use a sharp set of teeth on a stump grinder. Works fast, is far more safe using it than hand tools and offers an easier deeper cut if warranted. Next, clean up the wood shavings and dirty soil, lay down nice black topsoil and overseed the area. Perfect every time. The one thing we have to watch carefully is for cutting off too much of the supporting roots so that the tree cannot go over in a wind event or storm. We have a special procedure for this as well.
Oh man ! This is great ! probably going to buy 2 of them I have so many roots.
Was thinking this was the type of approach to take. Thanks for confirming. I have many more roots around my yard though. Whenever I cut a branch I typically use a pruning sealer. Was planning to seal all the roots I grind then put down sod and soil. Thinking the sealer might protect the tree if needed. 🤷♂️
Yeah true, I didn't think of that 🤔. Great idea 👍
I was thinking that this may be inviting pests and possible diseases into the roots of the tree, but not sure how much of a risk that is since it's only a few roots out of the gazillion the tree has
What do you mean by sealing? Is there a chemical to do that?
That looks like it worked pretty well. Thanks!
At least now you can run a lawn mower without hitting the roots!
I will be trying this out for sure. The tree root trick. Not getting the nails done.
U did a great job and my nails look great! 😁😁😘
Thank you baby and your welcome 😘😘😘
Thanks, that is a great idea, I been waiting to figure a way to lower my tree stumps.
The smallest stump grinder on UA-cam👍🏻👍🏻
Thanks for watching brother
That’s a great idea! I’m in south Mississippi too and I’ve got pine roots that drive me crazy in my yard too. I’ll have to give this a try.
Wow I will definitely be using this!!! Thanks for sharing
Thank you for watching Ari
I bought the concrete disc and a wood carving disc from Harbor Freight, the wood disc is infinitely faster than the concrete disc. The wood carving disc will become dull after 15 minutes or so, just keep the grinding disc handy and re-sharpen it with a quick hit on each tooth and go for another 15 minutes. No idea how many roots and brush stubs I cut in a couple of hours, but well over 200' of fence line.
Thank you Sir...you da man, cause I’ve been trying to do something bout my roots😎
Your welcome sir
This is very useful got some problem roots myself from a giant sweetgum and some pines as well time to order a wheel ✌️
Very cool. We generally use a hatchet, works pretty fast.
Yep that will work as well. Got this wheel pretty cheap and just wanted to try it
I may or may never use that grinding wheel but what a fantastic idea. Cheers from Fairhope AL your neighbor!!
I think I would have dug holes where the roots disappeared and cut the roots with a saw and pulled out the part that was visible.
Was trying to do minimal damage to the grass and tree
He's got this speeded up. Doing this would take a long time with that many tree roots. Be great for small roots.
I am Not a tree guy , i am a grass guy. Lol
🤣🤣
Great alternative for the Fred Flintstone ax swinging method Barney's like me can barely swing an axe anymore haha
Also works great on removing paint from steps xx
Cool idea! A good, cheap alternative to renting a stump grinder.
Cool idea dude I just so happen to have a diamond disk from a project I did last year.. I’m gonna try this out!
Awesome glad I could inspire lol. Thanks for watching brother!