Had one for a few years now! I put it aside and forgot about it actually. When I got it I thought that I didn't receive my carbides that I order so anyways 2 yrs later I run across this thing in a shop drawer and got it out and lowen behold I opened the pouch and started going through it and found my carbides in the inside pocket. I used it on my saw and its definitely is a Cadillac of sharpeners. Love it. Excellent product Timber line.
This sharpener works really well! The only thing these instructions don't show is that when you switch the handle to the other 30 degree hole, you are grinding against the direction you would normally go with a handheld sharpening steel. That threw me off, but really it doesn't matter when grinding down metal this way. This contraption put great sharp edges back on the teeth of the chain for both of my two Husqvarna saws, one is .325 tge other is 3/8ths. Wish I had bought this Timberline sooner. It keeps the sharpening angle level and right at 30 degrees. I cut up to 36" trees and when bucking them out making rounds, after having sharpened them with this thing, I get perfectly straight cuts. My only worry is that this company could go out of business (I have no idea how well these are selling, so I don't know), but I ordered a few extra carbide sharpeners so I can use this thing for the next 20 years just in case . The carbides are only $20.
BEWARE! I bought this sharpener in the UK and it was great to start with. However, the block and pawl (the part that holds the chisel against the sharpener) wears and stops you being able to fully sharpen the chain after awhile. I have tried and tried to get a replacement part, even emailing Timberline directly to as for a UK spares distributor. Timberline didn't even bother to acknowledge or answer my emails and so I don't know where to go next. This was a very expensive piece of kit (over £120) and so you would expect at least some basic customer service. There are similar devices in Amazon for a quarter of the price; I wonder if their customer service and spare parts are any better than Timberline.
The tool seems to be well made but I had a problem with the carbide cutter breaking after only sharpening a few teeth. I was following the directions so I don't know why it broke. I left the company two emails and one voice mail and never received a response. They are quick to sell the item but it appears customer service is non-existent after that.
I got mine earlier this week. I am a farm/ranch chainsaw user - so not pro or anything. So far, I am quite impressed with the product. I've been cutting some large oak, both crosscutting and ripping. The stuff is hard on chains. In just a few minutes I can use this little jewel to touch-up a chain - at least as good as new. Good job, Timberline!
This is the best sharpener I have found! If you follow the directions it works flawlessly! The instructions clearly state to adjust the center knob so it applies slight pressure only. My saw throws chips and cut true! Every neg post on every vid are from one guy. Don't listen to him.
I agree, with dozens of professionals saying how good it is, the only way this product could suck is if the directions were not followed, or misunderstood. This thing is perfect, and it should be pretty easy to use it perfectly!
cool glad to hear its a good product i use a die grinder with the Oregon stones works really well too but you need a power out let for it this would be better for in the bush
Sure no problem repairing chains that are badly "rocked" or that have it nails. It comes with 1 carbide file (you choose the size) and extra carbide files can be purchased individually. They last more than 10X longer that regular files. All have 1/4" diameter shaft so they are interchangeable with the tool.
what if some rocked cutters are worse than others? how can it adjust for cutting more or less metal depending on each cutter without having to reset the sharpener for each length?
I just used this same sharpener on my saw today. It wouldn't cut through paper it was so dull. But my nephew put this sharpener on it and it was cutting as good as new.
Does this file down the rakers and the tooth or just the tooth. It really looks like it could save me some time and money. I can use this in the field vs taking my chains in to the shop paying the service center for chain sharpening. It will pay for its self after the first few sharpening
@@yearginclarkeagreed it's easy. I don't touch them until every 3rd or so sharpen or when I feel there is not enough bite I've never measured it before 18" takes less than a minute.
@@glennimmortal Yeah that's about how I do it also. I go by how the chain feels when I'm cutting with it and touch them up accordingly. I've learned to definitely NOT file too much off or else you wind up with a chain that's too aggressive and jumpy, particularly when you're boring into something with the tip.
I am about to go out and try the one I bought a few months ago. I do note that the center black wheeled titghtener was not used nor was not discussed. It would be nice if this video addressed it.
From their website: The center knob is only needed if your bar is worn and the chain flops from side to side. It helps push the chain vertical when sharpening side A so that the carbide can be inserted into the chain without having to push it over with your finger.
Isn't the carbide portion supposed to get dipped into some oil first? I had done that when I started using it a couple years ago based on something I read or saw, but don't know if it is an official instruction or something I mimicked from someone else.
I've just got mine and it works pretty good, the only thing I am finding is that the guides are getting really sticky and metal seems to be wearing out of them. I have put oil on the shaft of the carbide to try to lube it but it doesn't seem to help.
cormus1 that’s because u carbide cutter is dull. Order a new cutter bit & u will instantly remember what u forgot @ well this thing worked when it was brand new. Tool is flawless - even brand new (like straight out of the package) chains can b improved by this tool. We throw chips the size of beer cans now with noticeably less stress on saw, motor, & humans alike. The cutters rehab old chains with all sorts of tooth damage. The cutters don’t last anywhere near as long as the company’s self acknowledged ‘best case scenario ‘ but they definitely pay for themselves several times over.
I ordered this chainsaw Asscessories kit with tool bag for $ 38.71on the web site back in January 28th. And been taking out of my bank account. So I was wondering what is the problem with my order and now it is March 4th
Y'all need to update this video for better quality and to make some things clearer - like that stopper that never seems to engage the tooth without getting in the way. Oh, and get these things in stock... trying to find them against the generic, low quality (useless) knockoffs has become pretty pointless.
Hello everybody. I am looking for chainsaw sharpener for my Ms201. Where can i get this tool and related carbide? Saw depth is 3/8". Do they have that size carbide?
I was wondering the same thing. Can it reshape a tooth that has a chip in it? Does it come with files for different sized chains or do you buy them separate?
Cool tool! But why is a different company selling this EXACT same tool WITH four cutters for $59.99, on sale for $29.00, and you sell it for $129.99 with ONE cutter?
I saw this tutorial and bought this gadget. I have tried three different ones before. All were just a gimmick and did not make my hated job of sharpening any easier . So yeah I got exited about this one and low and behold, it is useless and is already in the bin with the others. I am now using hand file and keep doing the job I hate the classic way!
Cuts in opposite rotation. Also look closely at the pitch. I was sharpening the point of the tooth one side but only the heal the other. I’m giving it one more try and paying clover attention. Perhaps after the pitch is recut I will have better results.
Either tighten the middle knob or your bar might be shot. I had the same issue with an over worn bar (which was causing cutting issues anyway). Replaced the bar, cutting and sharpening issues solved.
Had one for a few years now! I put it aside and forgot about it actually. When I got it I thought that I didn't receive my carbides that I order so anyways 2 yrs later I run across this thing in a shop drawer and got it out and lowen behold I opened the pouch and started going through it and found my carbides in the inside pocket. I used it on my saw and its definitely is a Cadillac of sharpeners. Love it. Excellent product Timber line.
This sharpener works really well! The only thing these instructions don't show is that when you switch the handle to the other 30 degree hole, you are grinding against the direction you would normally go with a handheld sharpening steel. That threw me off, but really it doesn't matter when grinding down metal this way. This contraption put great sharp edges back on the teeth of the chain for both of my two Husqvarna saws, one is .325 tge other is 3/8ths. Wish I had bought this Timberline sooner. It keeps the sharpening angle level and right at 30 degrees. I cut up to 36" trees and when bucking them out making rounds, after having sharpened them with this thing, I get perfectly straight cuts. My only worry is that this company could go out of business (I have no idea how well these are selling, so I don't know), but I ordered a few extra carbide sharpeners so I can use this thing for the next 20 years just in case . The carbides are only $20.
So to sharpen the other side tooth, all you have to do is change the handle you don’t have to do anything else to the sharpener?
You’d be able to order from place that precision machine work with tungsten and carbide
Just bought this…doesn’t say anything about filing the rakers down…does this do that too?
BEWARE! I bought this sharpener in the UK and it was great to start with. However, the block and pawl (the part that holds the chisel against the sharpener) wears and stops you being able to fully sharpen the chain after awhile. I have tried and tried to get a replacement part, even emailing Timberline directly to as for a UK spares distributor. Timberline didn't even bother to acknowledge or answer my emails and so I don't know where to go next. This was a very expensive piece of kit (over £120) and so you would expect at least some basic customer service. There are similar devices in Amazon for a quarter of the price; I wonder if their customer service and spare parts are any better than Timberline.
I just got mine. They upgraded my order for me with brass angle guides. Looks & feels like quality build. Looking forward to do some sharpening.
The tool seems to be well made but I had a problem with the carbide cutter breaking after only sharpening a few teeth. I was following the directions so I don't know why it broke. I left the company two emails and one voice mail and never received a response. They are quick to sell the item but it appears customer service is non-existent after that.
You were turning it in the wrong direction. Destroyed one of my bits that way
I got mine earlier this week. I am a farm/ranch chainsaw user - so not pro or anything. So far, I am quite impressed with the product. I've been cutting some large oak, both crosscutting and ripping. The stuff is hard on chains. In just a few minutes I can use this little jewel to touch-up a chain - at least as good as new. Good job, Timberline!
If this had a built-in rake guide it might be worth the price.
Brilliant tutorial. No fuss, no waffle. Thank you.
Cheers dude this was very helpful. I bought one off eBay and the instructions were in German 🤣 I didn’t fancy translating the whole manual 🤟🏻
This is the best sharpener I have found! If you follow the directions it works flawlessly! The instructions clearly state to adjust the center knob so it applies slight pressure only. My saw throws chips and cut true! Every neg post on every vid are from one guy. Don't listen to him.
Yeah, that Taskerer guy is trolling. This sharpener is great.
I agree, with dozens of professionals saying how good it is, the only way this product could suck is if the directions were not followed, or misunderstood. This thing is perfect, and it should be pretty easy to use it perfectly!
Video does not say anything about middle knob
I understand the price IF it’s made in the USA as wages and material are much higher than over seas!
Love this sharpener. Extremely high quality!
cool glad to hear its a good product i use a die grinder with the Oregon stones works really well too but you need a power out let for it this would be better for in the bush
Gdje se ovo moze kupit
Ordered mine a few days ago and I can't wait to try it!
The best chainsaw sharpener in the world. I use this in Romania
Stop-Forward prevented me from sharpening one side. A flat-head screwdriver became the stop-forward and functioned just fine!
You forgot to even mention the balance point. Such a pro lmao
Sure no problem repairing chains that are badly "rocked" or that have it nails.
It comes with 1 carbide file (you choose the size) and extra carbide files can be purchased individually. They last more than 10X longer that regular files. All have 1/4" diameter shaft so they are interchangeable with the tool.
what if some rocked cutters are worse than others? how can it adjust for cutting more or less metal depending on each cutter without having to reset the sharpener for each length?
Woo-Hoo!!!!!! :) Best cordless sharper ever used :) Imma order some more Carbide cutters Justin Case..
I just received a brand new kit today for free. It looks pretty interesting I'll definitely be testing it out soon.
I just used this same sharpener on my saw today. It wouldn't cut through paper it was so dull. But my nephew put this sharpener on it and it was cutting as good as new.
Just got mine read the directions and it sharpens flawlessly gues those who dont like can read!!!
What background music are you playing???? Love that and your vid!
I cannot seem to get the tool to seat on the chain. It seems the gap is to tight
Alright I’m sold. Imma order it
Does this file down the rakers and the tooth or just the tooth. It really looks like it could save me some time and money. I can use this in the field vs taking my chains in to the shop paying the service center for chain sharpening. It will pay for its self after the first few sharpening
It's a shame it doesn't address the depth gauge tooth as well.
This is most important
@@bronoi ...no it's not, can easily be done by hand
@@fm1224 Yes rakers are pretty easy to deal with.
@@yearginclarkeagreed it's easy. I don't touch them until every 3rd or so sharpen or when I feel there is not enough bite I've never measured it before 18" takes less than a minute.
@@glennimmortal Yeah that's about how I do it also. I go by how the chain feels when I'm cutting with it and touch them up accordingly. I've learned to definitely NOT file too much off or else you wind up with a chain that's too aggressive and jumpy, particularly when you're boring into something with the tip.
I am about to go out and try the one I bought a few months ago. I do note that the center black wheeled titghtener was not used nor was not discussed. It would be nice if this video addressed it.
From their website: The center knob is only needed if your bar is worn and the chain flops from side to side. It helps push the chain vertical when sharpening side A so that the carbide can be inserted into the chain without having to push it over with your finger.
Isn't the carbide portion supposed to get dipped into some oil first? I had done that when I started using it a couple years ago based on something I read or saw, but don't know if it is an official instruction or something I mimicked from someone else.
I've just got mine and it works pretty good, the only thing I am finding is that the guides are getting really sticky and metal seems to be wearing out of them. I have put oil on the shaft of the carbide to try to lube it but it doesn't seem to help.
cormus1 that’s because u carbide cutter is dull.
Order a new cutter bit & u will instantly remember what u forgot @ well this thing worked when it was brand new.
Tool is flawless - even brand new (like straight out of the package) chains can b improved by this tool. We throw chips the size of beer cans now with noticeably less stress on saw, motor, & humans alike.
The cutters rehab old chains with all sorts of tooth damage. The cutters don’t last anywhere near as long as the company’s self acknowledged ‘best case scenario ‘ but they definitely pay for themselves several times over.
When i turn clock wise, It end up biding as i go threw. what am i doing wrong?
Video leaves a lot necessary things to be had
How about ripping chain? How hard could it be to make one for ripping chain?
I'm interested in a ripping sharpener too.
250 dollars canadian is just rediculous would love to buy this thing but at that price there are so many better options
What does the center knob do? Or is it just for looks
Puts pressure on the chain so the chisel stays level with the sharpener
I saw (pun intended) somewhere to take a sharpie and mark the first tooth as a starting point
i just picked one up on Amazon yes it kicks butt .Forget those filly files
Lil orange train does a great job!
As of 1/2022 your website has the price at $124.95 BUT it's being advertised online for $39.99, why can't we order directly from you for that price??
That’s an internet scam Numa
@@rsellers exactly
Sales video not user video. It's a bit more difficult to get it working than that I've found esp on a non new chain
how much are them sharpners i found some on ebay 2 for 17.90 with 3 cutters each
What about the rakers
coming soon to a logging shop near you!
Quite confusing IF you have read the print directions! Make up your minds on how to set this tool up please!!
Where can l but one of those, l am unable to find a dealer in Australia.
HOW COME I HAVE TO THROW AWAY CHAINS BECAUSE I CAN SHARPEN THEM ANY FURTHER AS TIMBERLINE WONT LET ME SHARPEN ANY FURTHER
HarrisonTaskerer Throbber
How about a demo on a chain that needs a little more work.
I was too aggressive with cutting back the teeth and my carbide burr has chipped teeth as a result. Go easy!
I ordered this chainsaw Asscessories kit with tool bag for $ 38.71on the web site back in January 28th. And been taking out of my bank account. So I was wondering what is the problem with my order and now it is March 4th
You probably ordered a fake from a non legit website!
Lot of scammers out there!
Y'all need to update this video for better quality and to make some things clearer - like that stopper that never seems to engage the tooth without getting in the way.
Oh, and get these things in stock... trying to find them against the generic, low quality (useless) knockoffs has become pretty pointless.
Hello everybody. I am looking for chainsaw sharpener for my Ms201. Where can i get this tool and related carbide? Saw depth is 3/8". Do they have that size carbide?
I was wondering the same thing. Can it reshape a tooth that has a chip in it?
Does it come with files for different sized chains or do you buy them separate?
YES NICK IT CAN RESHAPE A TOOTH THAT HAS A CHIP IN IT. I USE IT ON MY DENTURES ALL THE TIME AND IT WORKS JUST GREAT.
how is the spring clip installed?
Does it sharpen each tooth or do you have to change sides to sharpen next tooth
I was thinking that also ?
Cool tool! But why is a different company selling this EXACT same tool WITH four cutters for $59.99, on sale for $29.00, and you sell it for $129.99 with ONE cutter?
Chinese knock off. Buy the Timberline original and replacement parts and bits are available.
Haven't seen depth gauge sharpening.
I'd love to try one out. My family and I cut all are firewood for are hunting cabin this sure would save time sharpening are four saws.
Our not are. Just saying...
So... not even the company explains what the center knob does??
Stops the chain from leaning over.
Simple enough, do any of you guys sharpen the identical teeth first & then go to the opposite ones?
that's what the instructions say to do
I saw this tutorial and bought this gadget. I have tried three different ones before. All were just a gimmick and did not make my hated job of sharpening any easier . So yeah I got exited about this one and low and behold, it is useless and is already in the bin with the others. I am now using hand file and keep doing the job I hate the classic way!
I have used mine to great success,
How much
Its a good one
how to order this product
www.timberlinesharpener.com Thanks!
I am 15 i really want one for my chainsaws but it is pricey that is the only problem i see
this didn't explain anything. what about the opposite side?
Cuts in opposite rotation. Also look closely at the pitch. I was sharpening the point of the tooth one side but only the heal the other. I’m giving it one more try and paying clover attention. Perhaps after the pitch is recut I will have better results.
No precision height adjustment
I can’t believe people would pay that much for this, when you can’t even use it to file the drag teeth.
Non issue!
whats the sound track? thx
$125 and only comes with ONE cutter? That's crazy insane expensive. No thanks. I'll get the chynese knock off one for $20
So we aren't talking about the center knob at all?
$140? Yeah, won't be buying one of those. I'd go $50, but that's too high.
My chain wobbles side to side while sharpening
Either tighten the middle knob or your bar might be shot. I had the same issue with an over worn bar (which was causing cutting issues anyway). Replaced the bar, cutting and sharpening issues solved.
I think he got carried away there
Mixed reviews
👏👍👌🇳🇴. 😷
Beware of the cheap knockoffs. They are awful.
show me it sharpening a chain thats dull
Brainmalfuction Why would you sharpen a chain that isn't dull
Pure junk. I could have bought ALOT of files for what I paid for this.
Ill give you twice the going junk price for aluminum. Seriously, not joking.
Way over priced.
No!