I've been searching for useful things to do with a 3-D printer. They are all like this, just cheap dollar store feeling plastic products, actually probably below a dollar store...
I'm sure he knows. Also, you don't need to dry the filament everywhere. Some places are very dry and it makes 3d printing easier. Some places may have humidity that could affect but not enough to require very constant drying like in some other places.
Hi, I'm thinking of buying flsun super racer. Did you get any problems during all these prints? Is the printer good? Any issues you had with this printer?
Don't use 3d printed anything on food unless it's single-use, which at that point just buy something permanent. 3D printed stuff is far too porus to be safely used with any kind of food. Eventually bacteria will find its way into crevices that can't be seen, but are there, and will contaminate anything the item makes contact with
This is very similar to a wood work project I have seen. The last one..... With a bit of work you could make it that the "Axel" part opens up to allow more storage as well. So it isn't just a tube. Though I did see you have access to it via one end, it is not as easy/nice as if that part opened up. Similar to this: ua-cam.com/video/WFhK3Tff3Do/v-deo.html
What are you using, here? I was wondering, after watching a lot of your new videos ( Aesthetically captivating 3d printing P O R N is what it comes to my mind when I watch them) and I wonder why your glass beds look so clean and how at the same time the filament get so well glued to it. It would be great to know because I also enjoy to keep my printer clean. And although with stick glue I can easily clean it with water, I would love to be able to have my bed that clean and pristine while printing too. Is it a mixture that you make? ua-cam.com/video/VWcFbo2nhaM/v-deo.html
Узпромстройбанк. То-то мне язык на корешках книг показался знакомым... Полезность - дело личное. Хирургу кузнечная кувалда бесполезна, равно как и кузнецу - скальпель и нтки для зашивания ран. Польза от таких подборок в том, что нет-нет, да и при просмотре натолкнёшься на что-то интересное.
What do you want to see 3D Printed in the next videos?
Amazing prints love it ❤️ Can you print Articulated Easter Dragon? It's on Cults3d
Another 3d printer upgrade
plez do a leg for my cat
Functional fully detailed roller coaster ... the kicker..... it has to p.i.p :)
@@thatbritishguy7042 do you actually need this? Be happy to do it :)
I want someone to trust me as much as this guy trust those Pla floating books
Lmfao
Lol
hahahaha!
My sides 🤣
Total garbage.
For the floating books I wouldn't use PLA, eventually it would bend and fail under the constant weight of the books
Yes, useful info, thanks!
Rolling storage box is a simply brilliant idea! Love that!
I appreciate you spreading your prints over different models.. definitely gives your setups/ settings alot of clout nicely done mate :)
Maybe wrap the bag starting from it's bottom and not handles ? Avoids having to pop the air bubble at the end which actually breaks the bag
The pistachio opener has some potential as a spudger/non-marring tool
1:34 > _"as you open the wallets the cars will go out stacked automatically"_
awesome
I liked the rugged desktop organizer 😎
Wow, this inspired me to become an inventor. Thank you!
Just got my printer today and that wallet is sick
That desktop organizer at 8:54 was the only thing that appealed to me.
what is this spray that you applied to the print table before starting the print?
Hairspray
Wow, I like these invisible bookshelfs!
Thank you, make sure to print them with tougher material :)
That shiny base layer is extremely satify8ng
Yes!
Hi! What is the stuff you spray on the glass before you print???
We absolutely love this video👏great job!
i like the little claw machine in the beginning it was cool. :)
@engineericly I think 4:21 should be “book” not “boom” I love the videos keep it up!
Fixed, thank you for your help!
You're welcome!
cool prints! I just ordered special filaments.. have to think about what to make of them
Вайвооо, ока. Ассалому алейкум)
Озимиздан экансизу, анчадан бери кораман сизи. Китобдан билиб колдм)
He k yeah buddy loved the video! And all the prints! Thanks for the hard work and effort!
Thank you so much:)
what is it that you were spraying on the glass bed?
Just found your channel and loving it. Thanks dude
Thank you for your feedback!
Pistachio opener is best I think xD
Es selamu aleykum!Great to see such books being put on the wall! Awesome ideas!
Just I would not use PLA for that!
i love the pleasing music
Assalomu alaykum. Kanalizni oldin uchratmagan ekanman. Gap yo'q.
Va alaykum Assalom, rahmat :)
Nice vid, I want to get into 3d printing, would a monoprice mini v2 be good enough to just get free prints online?
GREAT video. keep up the good work👊
Thank you!
2:34 in Video Duration, "Anoder" or is it "Another" I just heard a voice saying and where did the "D" come from
Wow! Very useful things.
Glad it was helpful!
i see ur Quran and other islamic books. May Allah bless you brother :)
I want to see a follow up on those floating books! lol
What spray was that you used on the glass plate in the beginning of the video?
Hello, it was 3D Printing glue
I've been searching for useful things to do with a 3-D printer. They are all like this, just cheap dollar store feeling plastic products, actually probably below a dollar store...
Friend,I really appreciate your work. We are looking for reviewers, would you like to review Longer's 3D printer & laser engraver?
What is that spray? Is that a hairspray he's using?
What do you spray at the beginning of the video ? :o
it is 3D Printing glue
No container to put the plastic bags in after rolling them up? 🧐
Hello. There was some problems with stringing in 3:36. How did you fixed that?
Actually that PLA I used make stringing even retraction is calibrated, in this case it is better to print in lower temperature
@@engineericly oh okay, thanks
What is the point of the bag wrapper??
You should store your filaments in dry box because they absorb humidity and it destroyes filament.
I'm sure he knows. Also, you don't need to dry the filament everywhere. Some places are very dry and it makes 3d printing easier. Some places may have humidity that could affect but not enough to require very constant drying like in some other places.
i don't see clip for glass bed, how to keep glass bed stay on
It does have, please look at front right and back left, it has two black mate clipper
Hi, I'm thinking of buying flsun super racer. Did you get any problems during all these prints? Is the printer good? Any issues you had with this printer?
Should you be showing your credit cards like that?
They are not working anymore :)
@@engineericly Ah, glad to hear it.
Klasse Idee,
Da lassen sich gleich ganz neue Projekte planen... Die Ideenkiste ist jetzt offen ;)
#AMPrO3D_Kunststoffmetallisierung
Great quality!
Thanks!
really useful
Solving problems no one has
Bag need to be folded from the bottom, so the air would have a way to escape.
Nice video editing
What's the name and where can I get some of that spray?❤
It is a 3D Printing glue
Don't use 3d printed anything on food unless it's single-use, which at that point just buy something permanent. 3D printed stuff is far too porus to be safely used with any kind of food. Eventually bacteria will find its way into crevices that can't be seen, but are there, and will contaminate anything the item makes contact with
The title should be: Random stupid things compilation 2022
I am opening pistachio with another pistachio shell
Genius :)
Pistachio Protip: Use a shell to open another shell.
Assalomu Alaykum
bu wallet dan buyurtma qilsak bo'ladimi ?
Va alaykum Assalom, yoq uzur buyurtma qabul qilmaymiz, birorta 3D printeri bor tanishizdan chiqartirib olishiz mumkin
Please tell me those cards aren't active!
I do :)
THIS FALL 3D PAINT FUNNY BAD 1:57
3d printer Narxi qancha
عجبني زيت النعناع.
Интересная подборочка на полке
Maybe the Printed Secret Bookshelf is not to hide from the thief but your wife😉
What are you spraying in the beginning of the video
Assalamualaikum Brother Well Done Always waiting for your new video ..!
Happy EID Mubarak In Advance ❤️🇵🇰
Va alaykum Assalam, thank you brother, Happy EID :)
@@engineericly You're Welcome 🤗
how hard is it to print a cat leg prosthetic and what are my chances of someone doing it for a poor little cat
This is very similar to a wood work project I have seen.
The last one..... With a bit of work you could make it that the "Axel" part opens up to allow more storage as well. So it isn't just a tube. Though I did see you have access to it via one end, it is not as easy/nice as if that part opened up.
Similar to this: ua-cam.com/video/WFhK3Tff3Do/v-deo.html
Oh, yes similar
What printer is that?
Which one you mean?
If someone opens your rolling storage in a bad way and mix everyhing, it won't be all useful.
I use a knife to open pistachios.
Are any of these patented
i just love this videoooo so muchh, very cool and innovative prints, plz keep it up!!
Thank you so much:)
If you can't open pistachio with your hands, you don't deserve them.
Nice logic man!
you showed us you credit cad
Jahongir mengayam shunaqa wallet qibering
videodagisi boladimi aka?
What are you using, here? I was wondering, after watching a lot of your new videos ( Aesthetically captivating 3d printing P O R N is what it comes to my mind when I watch them) and I wonder why your glass beds look so clean and how at the same time the filament get so well glued to it. It would be great to know because I also enjoy to keep my printer clean. And although with stick glue I can easily clean it with water, I would love to be able to have my bed that clean and pristine while printing too. Is it a mixture that you make? ua-cam.com/video/VWcFbo2nhaM/v-deo.html
Привет славянам из России ✋
🔥💕👌👍
Thank you!
How many plastic waste...
TOP 10 INUTILIDADES
Русский клей для стола. Русская летиратура😁
молодец! давай эргономику в гараж и инструменты!
👍👍👍
Thanks!
3
Чел по книгам видно что ты не амереканец
Hiiii
Heyyy
Русский акцент все равно слышен)))
hi
Hey man!
🦔
Узпромстройбанк. То-то мне язык на корешках книг показался знакомым... Полезность - дело личное. Хирургу кузнечная кувалда бесполезна, равно как и кузнецу - скальпель и нтки для зашивания ран. Польза от таких подборок в том, что нет-нет, да и при просмотре натолкнёшься на что-то интересное.
**useless
полностью бесполезные вещи!
и качество печати...
how about a glock? (its a surprise tool that will come in handy later)
Никому не нужные вещи
music is crap muted
wait is the song singing octopi over and over again or am i crazy