Best 3D Printing Ideas in 2022 - 3D Printed Trends (Part 2)

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ •

  • @1Darkmouse
    @1Darkmouse Рік тому +54

    Loved the editing, but the printing ideas felt like a waste of filament - most items seem quite impractical for real life appliance and only good for single-use entertainment.

    • @ademord
      @ademord 3 місяці тому

      same lots of crap here

  • @mikehen06
    @mikehen06 Рік тому +6

    The best part of this video hands-down is that the batteries are all turned the same way. My OCD thanks you for that.

  • @JaredC4
    @JaredC4 Рік тому +4

    What is the name of the tool used here? 0:42 for scraping the edge

  • @vick7172
    @vick7172 Рік тому +11

    Hey..you’re using a dry wall screws to mount the 3D printed things. You’re also using a drywall setting bit (used to prevent the screw from being screwed too deeply into the drywall.

  • @h.montgomery
    @h.montgomery Рік тому +6

    hello, what trick do you use to show an accelerated print with the printhead out of scope?

    • @headphonedog3180
      @headphonedog3180 Рік тому +1

      i think they have a tower in the corner of the plate that the printhead goes to every layer and simply take a photo of each layer of the main print when the printhead moves away to do the tower

  • @user-fj3gt2rj4e
    @user-fj3gt2rj4e Рік тому +2

    What was the chemical you used at the very start bc i usualy struggle geting my prints off the same bed

  • @davetriesthis
    @davetriesthis Рік тому +9

    Do you have a video of just the SD card holder? Would love to share with my photo-centric viewers.
    Also I have to figure how to modify that for CFE-A and CFE-B cards which I now have a lot of.

    • @HuFlungDung2
      @HuFlungDung2 Рік тому

      How useful is that really? Be better if you added a business card size slot alongside to add a label for each card.

    • @funkdaddyflex
      @funkdaddyflex Рік тому

      I think it would be cool for Nintendo switch games

    • @davetriesthis
      @davetriesthis Рік тому

      @@HuFlungDung2 Well I have four CFE-A cards and two CFE-B cards, so having a holder for those would be handy.

  • @UzLooKsiZ
    @UzLooKsiZ Рік тому

    Salomn oka yahshimisiz maslahat berolisizmi qanday modeldagi printer ogan yahshi

  • @Nameless-..
    @Nameless-.. Рік тому +18

    I honestly can’t wait to get a 3D printer, I don’t really care to build super big projects or crazy stuff but to learn and create things to help with everyday stuff, I definitely want to just make art for my Gaming room as well as around the house to add some authenticity

    • @thecateatingasian
      @thecateatingasian Рік тому +3

      did you get one?

    • @mitchellvolcano
      @mitchellvolcano Місяць тому +1

      @@thecateatingasian i think he did but he didn’t get the notification and i just ordered an A1 mini

  • @orifxonhotamovhayotivaijod5326
    @orifxonhotamovhayotivaijod5326 Місяць тому

    Qoyil shunaqa uzbek yigitlarimiz borligidan hursanman. English tilida kontent tayyorlash prosta respect.

  • @maximilianoscilingo4738
    @maximilianoscilingo4738 Рік тому +1

    Amazing idea, you have the stl of the inner ring updated of 26:30 minutes? Thanks

    • @UriyZ9mb8e
      @UriyZ9mb8e Рік тому

      i also would love to see this. if i find it i will paste the link here

  • @webpro607
    @webpro607 6 місяців тому

    11:52 can you please tell me what filament used here? Very beautiful..

  • @MATRIXISREAL-rb6gj
    @MATRIXISREAL-rb6gj 5 місяців тому

    what are you spraying on the build to remove it easily?

  • @traceurAlex
    @traceurAlex Рік тому

    0:31 what did you used there? 👀 Air spray to cool the bed? Wd-40? 👀👀

  • @creative3dstudio779
    @creative3dstudio779 4 місяці тому

    Assalomu Alaykum. Qoyil, ijodizga omad. O'zbekligizga hayron qoldim😮❤❤

  • @meharbankhan9203
    @meharbankhan9203 4 місяці тому

    Can you tell me what camera and lighting you used it with?

  • @dmakhkamov
    @dmakhkamov Рік тому +1

    Great to see an Uzbek guy to reach this level! Bosing!

  • @kjadskcn
    @kjadskcn Рік тому

    Could someone tell me, if these projects work equally well with Resin printers, Thank you.

  • @chandanraj5778
    @chandanraj5778 6 місяців тому

    Hi, which 3d printer is best with high accuracy?

  • @daniilkrivonos1157
    @daniilkrivonos1157 Рік тому

    How do you clean your printing bed from those marks?

  • @jaume748
    @jaume748 Рік тому +2

    Hi! I loved the tool that you used to clean the piece at 0:42. Could you please send a link or name it? Thanks

    • @jaume748
      @jaume748 Рік тому +5

      for those who are still in doubt: is a deburring tool

  • @Kady3DPrinting
    @Kady3DPrinting Рік тому +1

    Very good items

  • @colinnowak2832
    @colinnowak2832 Рік тому

    0:42 what is that scraping tool I got to get one of those.

  • @ShashwatKumar
    @ShashwatKumar Рік тому

    Whats the screw size used at 17:29

  • @DeanNutz
    @DeanNutz 9 місяців тому

    Im new to printing, what ever app you use to make this stuff is it user friendly?
    I dont want to get a printer an cant use the software lol

  • @jstipsits60
    @jstipsits60 Рік тому

    what are they spraying on the plate?

  • @JuzziKing
    @JuzziKing 4 місяці тому

    Where i can get the design of the wallet showed in the video??

  • @antoniocardenas4678
    @antoniocardenas4678 Рік тому

    What kind of material? Is it toxic?

  • @nishita3753
    @nishita3753 Рік тому

    Can u please provide the video procedure of making of thumb saver.

  • @VaughnCampbell
    @VaughnCampbell Рік тому

    Where did you get those plastic bags? Would love to find some of those up here in Canada....

  • @jaggercarpenter
    @jaggercarpenter Рік тому

    what website do I go onto to download the Gyroscup

  • @purvislewies3118
    @purvislewies3118 4 місяці тому

    i have a ender3 v2 and help with the settings,bed and print settings

  • @IcxnicCloud
    @IcxnicCloud Рік тому

    Guys My Tech teacher in middle school and I were talking abt 3d printers when he said this is something that really matches you he sends me a mail where you could apply for building a 3D printer by now 1st day passed of building I am 190% of what we needed to make this week it’s really fun and I’ve seen it in action works like a charm so if the wallet at 7:04 is PLA I’m making it for sure when i finish building (11th of march 2024 is exam so basically the ending)
    Could someone tell me if 7:04 is pla

  • @goitiaquispemichaeloscar9287
    @goitiaquispemichaeloscar9287 10 місяців тому

    cual es el programa que usas para diseñar?

  • @tripax3d363
    @tripax3d363 20 днів тому

    Hi where do you buy your lime please?

  • @craftingwithus917
    @craftingwithus917 9 місяців тому

    Ajoyib.Siz qanday material ishlatyabsiz

  • @DmitrySholokhov
    @DmitrySholokhov 2 роки тому +17

    Massage tool usage had me laughing :D

  • @GrayFox45
    @GrayFox45 Рік тому

    what is that beautiful filament at 11:31?

  • @Moebius_84
    @Moebius_84 5 місяців тому

    Hola, de casualidad estan para descargar?

  • @adroziy_live
    @adroziy_live Рік тому +1

    very well. amazing. thankyou for hard work

  • @morphiz
    @morphiz 8 місяців тому

    I know how much work and effort has been put into this. Good job!🥰👌

  • @haugenx
    @haugenx Рік тому

    Can you share your settings used for the wallet.

  • @paladinew
    @paladinew Рік тому +2

    Wow, really incredible job! On your Aquila, what are you using to keep the glass bed down? I didn't see any clips... Thank you!

    • @engineericly
      @engineericly  Рік тому

      I use some black clippers with threads, take a look closer :)

  • @ThePooTubeChannel
    @ThePooTubeChannel 14 днів тому

    What software is that

  • @nikm5628
    @nikm5628 Рік тому +2

    Dude... That "massager" is a weapon 😂

  • @Superarabr
    @Superarabr Рік тому

    What Is The Printer With The X On It

  • @michaelmain2557
    @michaelmain2557 Рік тому

    can you put the dimensions and other stuff to print the wallet

  • @MarcoCesenatico
    @MarcoCesenatico Рік тому

    Hello, you are a grown-up, which silk filament do you use?

  • @MenemonGamer
    @MenemonGamer Рік тому

    What filament brand you use?

  • @Pisto48
    @Pisto48 Рік тому

    Which software do you use to desing ?

  • @NarcissistRecovery
    @NarcissistRecovery Рік тому

    What printer is that

  • @jasonproulx1231
    @jasonproulx1231 Рік тому

    He's taking all the red tea !!!!!!

  • @thortaub5464
    @thortaub5464 Рік тому +1

    The device you made so that you could sit on the couch And have a cup there reminds me of that thing so that babies don't spill cereal everywhere

  • @thebuzzbeekeeping3589
    @thebuzzbeekeeping3589 Рік тому

    The best cool Prints

  • @eresalgo21
    @eresalgo21 Рік тому +3

    your print are awesome!! did you mod the firmware of the voxelab aquila?

  • @masonhildebrand2869
    @masonhildebrand2869 Рік тому

    What is the stl file for the wallet you made

  • @zillpatel201
    @zillpatel201 6 місяців тому

    No lie I would actually use some of these contraptions pretty cool!

  • @mohammadhoseinkazemi4797
    @mohammadhoseinkazemi4797 Рік тому

    You are the best Man

  • @smallthings1984
    @smallthings1984 Рік тому

    I'm new to 3d printing. It's so much fun. Sub.

  • @Raimen_
    @Raimen_ Рік тому

    Para que sirve ese mod del minuto 9:11?

  • @jeditor8960
    @jeditor8960 Рік тому

    Really cool

  • @AeroCraftr
    @AeroCraftr Рік тому

    thanks for the idea

  • @0ne_fa
    @0ne_fa Рік тому

    Thanks i'll use it for my new videos

  • @AdobadoFantastico
    @AdobadoFantastico Рік тому +2

    The pen launcher made me chuckle.

  • @flo0079
    @flo0079 Рік тому

    Great video

  • @mazzzavaley349
    @mazzzavaley349 Рік тому +1

    uzbek inson kilgan ekan bu videoni, baraka topsin, meni fikrimcha agar plastik shtamplar ishlab chikarishni yolga kuysa shu printerda ancha pul topsa buladi, salomat bulinglar!

  • @KevinMilanFranando
    @KevinMilanFranando Рік тому

    Super camera angles bro

  • @Magmaboy2222
    @Magmaboy2222 7 місяців тому

    Hey, are you Turkish? Because I saw Turkish letters on teabags. For egsample, it writes kuşburnu on teabags.

  • @omarhamzatg8833
    @omarhamzatg8833 7 місяців тому

    Hello from Algeria this invention is wonderful how much do I want one 😊

  • @mark897
    @mark897 7 місяців тому +2

    Mit nem normalen Bett, oder einem guten Boxspringbett verrutscht da nix.
    Da kann man ja auch gleich auf ner Luftmatratze schlafen, die rutscht auch nur rum.
    Und mit nem Zirbenholzbett bewegt sich im Schlaf fast niemand mehr.
    Reinlegen, einschlafen und völlig erholt in der exakt gleichen Position aufwachen, in der man eingeschlafen ist. ❤

    • @goilo888
      @goilo888 3 місяці тому

      WTF, did you even comment on the correct video?

  • @tenxengineer
    @tenxengineer Рік тому

    Absolutely amazing!

  • @DullestMass11
    @DullestMass11 Рік тому

    what is that stuff you spray

  • @biagioschena4268
    @biagioschena4268 Рік тому

    Ma se uno vuole creare da sé che software ideale per modelli 3d

  • @nano7586
    @nano7586 Рік тому

    Damn this is so satisfying to watch

  • @lenokeyy
    @lenokeyy Рік тому

    how do you get your prints to come off so easy ???

    • @zinput
      @zinput Рік тому

      Glass and pei self release most of the time when the surface cools.

  • @audreybossman8369
    @audreybossman8369 8 місяців тому

    Thanks a ton! Fantastic set of prints. I'm printing the Parametric Battery Box now because I have been looking for a fantastic solution to my plethora of batteries. Just downloaded the Gyroscup files because that is just super rad.
    Update: The Gyroscup is fucking amazing! It was a little tight at first, but a quick zip zip with a 1/4 drill bit and now everything is free floating. It works like a dream.

  • @CrashPro1
    @CrashPro1 Рік тому +20

    Thumb saver is really awesome and definitely going to print! But it's too use on someone else, hence saving your thumb from the pressure 😆

    • @CrashPro1
      @CrashPro1 Рік тому +1

      BTW, you earned a sub! Love these designs and look forward to more.

  • @workinprogress9483
    @workinprogress9483 Рік тому

    i am in awe of your spring collection

  • @stevetaylor6008
    @stevetaylor6008 Рік тому

    Where can I find these files

  • @Guhhhhhhhhhhhhhhhhhhhhhhhhhhhh
    @Guhhhhhhhhhhhhhhhhhhhhhhhhhhhh 2 роки тому +3

    At what layer height did you print these, they look so smooth!

    • @urgamecshk
      @urgamecshk Рік тому +2

      0.1-0.16 look good. 0.1 is essentially flat

  • @ManoelaOrnelaAndradeLopes
    @ManoelaOrnelaAndradeLopes 2 місяці тому

    Alguém aqui sabe o nome dessa impressora?

    • @Reallyfastvideos
      @Reallyfastvideos 2 місяці тому

      El tiene muchos impresoras pero ambos son “ender”

  • @Tylox-7
    @Tylox-7 Рік тому +1

    The pen launcher is my childhood dream

  • @rabboniyustozlar1303
    @rabboniyustozlar1303 Рік тому

    Mashaalloh 👍 Alloh ajrizni bersin birodarim

  • @printo3d
    @printo3d Рік тому

    Have you already got the flsun v400? OMG :O

  • @Valentin-oc5nh
    @Valentin-oc5nh Рік тому

    pistaccio opener i would buy!

  • @mohammadhoseinkazemi4797
    @mohammadhoseinkazemi4797 Рік тому

    You are the best

  • @muhammadkarimov.b
    @muhammadkarimov.b Рік тому +1

    Ruxiy tarbiya digan kitobdan bildim admin uzbek

  • @EnergiZeScuba
    @EnergiZeScuba Рік тому

    "for your fingers" suuuure :D

  • @mavlonovoybek73
    @mavlonovoybek73 Рік тому

    shu narsalarni ishlab chiqarishni yo'lga qo'yganmisizlar?

  • @3.14_am
    @3.14_am 3 місяці тому

    21:40 Mind blowing solution: Cloth bag🤯😉

  • @ForTheEraOfLove
    @ForTheEraOfLove 6 місяців тому +4

    books and humidity don't mix 🚫 and neither does PLA and food safety

  • @harikriz369
    @harikriz369 2 роки тому

    Wow .. really nice . .!! May I know which camera you are using for your studio ?

    • @engineericly
      @engineericly  2 роки тому +2

      Hello, as this video includes several footages in 2022, these videos were recorded using Firstly Redmi Note 10 pro, Sony ZV E-10 and Canon R5

    • @harikriz369
      @harikriz369 2 роки тому

      @@engineericly Wow great !!! Thanks ..

  • @mohammadhoseinkazemi4797
    @mohammadhoseinkazemi4797 Рік тому

    Very Nice

  • @Bristle_Ezx
    @Bristle_Ezx 28 днів тому

    На каком пластике ты печатал, ответь пжпжпжпжпжпж

  • @tylerschmit2447
    @tylerschmit2447 Рік тому

    Would you be able to quote me on 3d printing some parts for me? If not, could you recommend someone or a company? I'm looking to prototype a product.

  • @kozuch2710
    @kozuch2710 Рік тому

    Go with karambit keychain spinner, viewers will love it

  • @serenedaoud
    @serenedaoud 6 місяців тому

    For the attachable cup-holder, the heat from the cup would melt the plastic.

  • @276matto
    @276matto Рік тому

    Teas from my country 😍Turkey ❤❤

  • @Bmerchin
    @Bmerchin Рік тому

    I’ve never seen someone take a blowtorch to remove a print from a build plate before. I have questions 😅

  • @misslies84
    @misslies84 Рік тому

    Why do you humidity your books? 😅 Great video for the 3d