Really depends on the filament type. PETG can handle higher temps than PLA and TPU is even more resistant than PETG. So it can definitely be melty if you use the cheap and abundand PLA, but if you havr a capable printer for something a bit more... durable... then you can definitely it work.
Assalomu alaykum aka yaxshimisiz.Men temir odamning bosh kiyimini yasamoqchiman ENDER 3 Pro 3d printerimiz bor . qanday qilishni o'rgata olasizmi? iltimos
@@isthattrue1083I said might. It depends on the settings used when printing. Not enough infill, and it'll leak. You also want to use something that's actually safe to eat from, as I'm not sure many if any filaments are. We're trying to LOWER the amount of plastics we accidentally ingest, not intentionally have more with our morning coffee.
@@isthattrue1083 just because it is water tight it doesn’t mean it is safe. You should never eat or drink directly from 3D printed objects hence it should be coated in a food safe resin.
The first object is dangerous, PLA or PET will simply melt above 40 or 60°C. Using 3D printed objects for food is also extremely dangerous if you don't want to eat micro-plastics.
That popup drawer looks really poorly designed. The bottom part is almost useless, as it would be very difficult to get anything out of it, and you couldn't store anything thicker than a pen in it because the upper draw needs to come back down on top of it when it closes. This seems really pointless.
I'd imagine you just tip it upside down and slightly shake so they fall out of the hole? If they fit in that way, they must also fit out that way too xD
If you don't know, ideas or not his, you can find a lot videos with the same prints. There is origin and there is a lot off people like "Engineericly" who just make video to get followers.
If you have to ask in a UA-cam comments section then trying to start a business probably isn’t a good idea. It is never a good idea to start a business with something you know absolutely nothing about. Get yourself a printer first and learn to use it and then you will have some idea of what you need to start a printing business. Your budget isn’t enough to start a business either, that’s barely enough for an entry level printer and some filament.
Someone has to be a real idiot to install a jacket hanger this much close to a wall. Would be much more cost efficient just to print 2 brackets to extend it.
are you saying "clotheses"? there's just one "es" there. "clothes" Also, "bowl" is pronounced more like "b-oh-l" not bowEl .... bowels are part of your guts...
The radiator hooks are a Tiking time bomb
I put my clothzez in the dryer.
🫣
He doesn't seem to understand that if it is too hot for clothes to catch fire, it is too hot for most filament!
i put mine behind my servers rack... Best efficiency ever ;)
In the dryer!? You weirdo! 😉
@@cybergnetwork588with that logic dryers wouldnt even exist
😂😂😂😂the hello part killed me, amazing!
Jazakalluhukhairan
Lekin sizga qoyilman omadizi bersin✊️
8:55 what a tasty microplastic 🤗
Most 3d printer aren’t food safe so don’t use them to hold in wrapped snacks but 3d printing is a hobby to get into
assalamu aleykum akhi, you have good examples to print. Thank you.
Great idea! 👍
0:24 and melt the hooks as well
Really depends on the filament type. PETG can handle higher temps than PLA and TPU is even more resistant than PETG.
So it can definitely be melty if you use the cheap and abundand PLA, but if you havr a capable printer for something a bit more... durable... then you can definitely it work.
You're not using the screw claws when installing the Drawer?
that is the first think I thought when I saw it (happy that someone else also noticed)
Lame of you not to give a shout out to @simonegiertz for being the original designer/inspiration for the foldable clothes hanger. Disappointing.
Exactly what I thought when watching it.
He most likely didn’t know that nvm he gives out the creds
exactly!!
I’ve seen numerous people make videos about how they come up with the idea but Simone def had the idea first.
You can always try crying about it if that makes you feel better little bro
Gracias!!
9:13... I know that gernade from thingiverse... that's a grinder isn't it?
Assalomu alaykum aka yaxshimisiz.Men temir odamning bosh kiyimini yasamoqchiman ENDER 3 Pro 3d printerimiz bor . qanday qilishni o'rgata olasizmi? iltimos
assalamu alaykum good luck
Va alaykum Assalom)
The mug might require coating it with a food safe resin(I think those exist?) to seal in the plastics and make it water tight
They do
I printed it water tight no problem.
@@isthattrue1083I said might. It depends on the settings used when printing. Not enough infill, and it'll leak. You also want to use something that's actually safe to eat from, as I'm not sure many if any filaments are. We're trying to LOWER the amount of plastics we accidentally ingest, not intentionally have more with our morning coffee.
@@isthattrue1083 just because it is water tight it doesn’t mean it is safe. You should never eat or drink directly from 3D printed objects hence it should be coated in a food safe resin.
@@TheLukemcdaniel it doesn’t matter if a filament is food safe, the process of FDM printing isn’t.
Good
The first object is dangerous, PLA or PET will simply melt above 40 or 60°C.
Using 3D printed objects for food is also extremely dangerous if you don't want to eat micro-plastics.
womp womp
as if your body wasn’t already full of microplastic
just seal them in food-grade epoxy if you want to eat out of them
استمر وفقك الله❤
That popup drawer looks really poorly designed. The bottom part is almost useless, as it would be very difficult to get anything out of it, and you couldn't store anything thicker than a pen in it because the upper draw needs to come back down on top of it when it closes. This seems really pointless.
It is pointless
I printed that phone arm thing four times for friends now 😂
How do you do all of this
What is the print model? I want to print it for myself
Where do I get the stl
How do you get the coins out of the coin vortex piggy bank?
I'd imagine you just tip it upside down and slightly shake so they fall out of the hole? If they fit in that way, they must also fit out that way too xD
Where i can buy this pen
Thank you for the idea's
You’re welcome 😊
If you don't know, ideas or not his, you can find a lot videos with the same prints. There is origin and there is a lot off people like "Engineericly" who just make video to get followers.
Yeah, I just showcase the models@@vikis9
looks really interesting
I love your jobs, your test your presentation. Now ı see you are muslim, I became happy too.
Wow I liked this invention bro. Good luck
When I was younger, charities used to have giant ones of that vortex bank for donations. I used to beg my mom for coins to put in them.
Best engineering
Thank you!
Mashaa Allah, 3 sips sunnah
blud went slurp slurp, slurp.
Aka O'zbekcha kantent ham qiling please❤😅😊
8:55 microplastic
Bro I will to start 3d printing business with 50 thousand rs budget
Which 3d printer is suitable for it
If you have to ask in a UA-cam comments section then trying to start a business probably isn’t a good idea.
It is never a good idea to start a business with something you know absolutely nothing about. Get yourself a printer first and learn to use it and then you will have some idea of what you need to start a printing business.
Your budget isn’t enough to start a business either, that’s barely enough for an entry level printer and some filament.
@@conorstewart2214 very much thank you for your great advice sir ...🤝🤝😌
Music name ?
Have an upvote for your funny remarks. 3D prints are cool too.
Where you from😊
Someone has to be a real idiot to install a jacket hanger this much close to a wall. Would be much more cost efficient just to print 2 brackets to extend it.
Which 3d printer is best ? Could you give me list
This is like asking what vehicle manufacturer is best.
If you can't type that same question in the UA-cam Search bar, please don't buy a 3D printer.
Well I could but he has experience that’s way I was asking and I wrote him several times with asking same question but no answers
@@farhodhamidov5498 then stop asking him ? just look on youtube, people will usually also have experience
@@zakzac1Toyota,Honda. Pretty easy
cnc kitchen ist deutsch, bist du auch deutsch?
Where are you from bro
Uzbekistan
Good video
7:50 Simone Giertz has entered the comments section
Uzbek sila
Please do not eat out of 3d prints!!!! They are NOT food safe! 2:14 and 8:30
Yeah, we should use food safe filament
🎉
9 minutes for simply print via v400?
i spent 12 minutes for standard benchy on k1 max)))
come back in a month and tell us how great it is then (note: its probably not gonna work anymore)
google image - sunflower teeth where
🔥🔥🔥
❤❤
🤔🤔🤔
stopgreenscreenkids
simone giertz invented and designed the real foldable clothes hanger and not even a single peep about her, sucks.
For the first thing, what happened if the 3d print part went on fire? 😂😂😂
Слава Украине
I need me some golden life
are you saying "clotheses"? there's just one "es" there. "clothes"
Also, "bowl" is pronounced more like "b-oh-l" not bowEl .... bowels are part of your guts...
i'm first😅
Good job!
You are morally corrupt.
You realy have nothing to do in your life huh?
Please learn the pronunciation of "th"
Hes obviously not american
Let’s see you learn another language or two. Guarantee you won’t be fluent or without mistakes in a second language.