Josh you gotta give yourself more credit buddy, you aren’t an amateur anymore! All that matters is that you do the best you can with the time parts you have on hand and that’s something to be proud of. I love your solo episodes because they feel so genuine. Can’t wait to see the FC come to life!!
Josh my man. You’ve succeeded with this build!! One of my favorite cars that get over looked by nicer fancier shit. Glad to see you build this into something that’ll get used.
Little tip with rivnuts Especially for kits Once you’ve drilled the holes Small amount of pain from a brush in the whole 2 part epoxy around the edge of the rivnut when you instal Stops them spinning and also reduces the chance of the holes rusting
Great video josh, for someone that is not qualified to do what you have done with the car is amazing, as you said it might not be perfect but you can take great pride in knowing you did it all yourself, great work, can't wait to see it finished and looking forward to seeing your choice of wheel to fit under those wide arches
You’re better at this than you think Josh…especially with little to no experience. You’ve got drive and a vision for the results! Keep at it!! You’ll end up amazing everyone in the end!
TIP. When fitting up a kit like that start from the rear and work forward 😉👍 i think you said something n realized that at the end but its what iv learned after working on a dozen or so different kits with my mates.
Is there technically any qualification for bodykit fitting anyway :D ..You are doing fine Josh. Only thing was that legit before and after pics of the trunk would have been cool. It is a major change for a couple quid.
Have import and domestic in my lineup. But my 87 fc se (stock 4lug, slick top , manual rack and windows ) is my favorite child lol . Now 5lug swapped to turbo2 bits and diff . 6port turbo with a holset hx52. Down on a new rebuild port setup. Bought it in 2004 bone stock .He’s a keeper . Respect from Austin Texas USA 🇺🇸 . Rotary for life 🦾🔧🖤🍻
Your gona love the 13b turbo Josh! some engine upgrades and it will hall ass! You should compression test engine to give you an indication of condition of engine/life.
That kit is very subtle but makes a huge difference. Now it’s begging for a spoiler, some volk wheels or a set of work meisters and a good set of coil overs. But it looks great for only two days into the build. What power adders are planned?
Good shyt man, great work on the festivities and glad to see the 7 come along. I would love to have another crack at an fc. Learned how to slide in a white gxe myself. Edit: love the sex spec kit
I’d need that right fender and front bumper for my red crash damaged FC. If you still have the boxes from the kit and want to send it to me (I cover shipping), let me know 🙃✌🏻
What do you think guys? Will it be a show-stopper by the end?
Looking cool so far. Good work Josh. Insane how busy you guys have been.
My dream car 💜
Hell ya it’s going to be crowd pleaser
It will if he manages to grow back the Ronnie !
it's an Irish car after all
Josh you gotta give yourself more credit buddy, you aren’t an amateur anymore! All that matters is that you do the best you can with the time parts you have on hand and that’s something to be proud of. I love your solo episodes because they feel so genuine. Can’t wait to see the FC come to life!!
Josh my man. You’ve succeeded with this build!! One of my favorite cars that get over looked by nicer fancier shit. Glad to see you build this into something that’ll get used.
Little tip with rivnuts
Especially for kits
Once you’ve drilled the holes
Small amount of pain from a brush in the whole
2 part epoxy around the edge of the rivnut when you instal
Stops them spinning and also reduces the chance of the holes rusting
roll Cage on a convertible fc is just pure summer dream :p i would do that just to troll supercars at Sundays cars and coffee 😂
Great work Josh really looking forward to seeing this come together! Lz fest was awesome fun was great to see some of you guys in real life!
Great effort for two days work Josh, she's coming along nicely so far!
Great video josh, for someone that is not qualified to do what you have done with the car is amazing, as you said it might not be perfect but you can take great pride in knowing you did it all yourself, great work, can't wait to see it finished and looking forward to seeing your choice of wheel to fit under those wide arches
You’re better at this than you think Josh…especially with little to no experience. You’ve got drive and a vision for the results! Keep at it!! You’ll end up amazing everyone in the end!
Nice work Josh. Car looks a lot better. Keep it up
Well done on doing it 👏👍. Like the bodykit
Give yourself more credit mate...great job...👍
Your car is looking somewhat sweet, love watch your vids keep up the quality work 👍
Steam is you're best friend with that carpet josh. Covered a camper in It years ago. It stretches and settles quiet nice with a bit of steam
TIP. When fitting up a kit like that start from the rear and work forward 😉👍 i think you said something n realized that at the end but its what iv learned after working on a dozen or so different kits with my mates.
yup.... realised that at the end haha
Is there technically any qualification for bodykit fitting anyway :D ..You are doing fine Josh. Only thing was that legit before and after pics of the trunk would have been cool. It is a major change for a couple quid.
Have import and domestic in my lineup. But my 87 fc se (stock 4lug, slick top , manual rack and windows ) is my favorite child lol . Now 5lug swapped to turbo2 bits and diff . 6port turbo with a holset hx52. Down on a new rebuild port setup. Bought it in 2004 bone stock .He’s a keeper . Respect from Austin Texas USA 🇺🇸 . Rotary for life 🦾🔧🖤🍻
Your gona love the 13b turbo Josh! some engine upgrades and it will hall ass! You should compression test engine to give you an indication of condition of engine/life.
Love this stuff Josh, please keep it up if possible 😁
That kit is very subtle but makes a huge difference. Now it’s begging for a spoiler, some volk wheels or a set of work meisters and a good set of coil overs. But it looks great for only two days into the build. What power adders are planned?
Looking good Josh can't wait to see it with a nice set of rims 🤟🤙
This is going to look good! Hope you paint it white!
Good shyt man, great work on the festivities and glad to see the 7 come along. I would love to have another crack at an fc. Learned how to slide in a white gxe myself.
Edit: love the sex spec kit
Nice work love it 👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾
Fair play josh doing a stellar job keep it up. :)
Grand job fair play 👍👍
You need to get a motor from PPRE here in New Zealand for the RX7 . !!!!
Need to build it as a sleeper drift car. The opposite of flashy... Just open the baffles and let her rip!
3 rotar and cage ... josh needs a nuts build
Nicely done
Wanna to take my car just so i can see it transform lol. Class work lad
Good job Josh👌. What's wheels gonna be fitted?
We all didn’t have to say it now go crazy
I saw u guys go past my road
Stick a big wing on the back and it'll be grand 😉
Love it. Definitely keep it street though
What is the theme in the shop honeycomb hideout
Yeeessss more VERT videos 🤤
The rx7 is sick
Love it!
Any update on the rx8 you guys bought awhile ago?
He sold it ages ago
And the moor mount motors has it
@@atk2110 Ahh, I tried to find a second video of it but couldn't find anything.
I was hyped to see them tackle an rx8, but the fc is rad!
Cool car good job
I've got a 5.0 in my RX-7 drop top id like to relocate the radiator to the trunk any help
One for spares would be handy
hmmmmmm
Link for the bucket seats?
www.optiondrift.com
did you ever find what seats they were man?
Josh starting to become a bit of a dab hand. Inspiration for all the weekend warriors and have a go heroes.
Ronnie-X7.
Well done Josh
The Ronnie disappeared half way through vlog 🤣😳👀🤯
Build a car to go fast around the corners. Key word corners!!!
Solid 🤘🏽
I’d need that right fender and front bumper for my red crash damaged FC. If you still have the boxes from the kit and want to send it to me (I cover shipping), let me know 🙃✌🏻
That’s a gp sports my guy
Is the bit the carpet went over not completely rotten?
Also give yourself more credit, great job
nope... no rot in the car, just dirty haha
@@joshholdsworth4110 ideal. It looks great
Does anyone think Josh's RX7 needs a 326 power wing to compensate for the super wide fenders?
hmmm it needs a spoiler and that just may work.
Dubai should be the next location 😂
nice job
I want this
What car is that at 0:15
s12 Silvia
@@Macdrift85 thanks mahn
Haha, Dave's cars are "finished" 👀🤣
nice!
With that bodykit, roll cage, no top,
big wheels, slammed and straigth pipe
a very nice summer car🔥🤙
that's the plan!
FC love ftw
Love that 2 stroke brap brap brap sound 🤤
👍
Ayyyy 👌
Hiya, Can I have ur little redbull fridge plz 😁 I will sweep the yard for an hour for ye 🙂
🙌
GRIP ROYAL DO NOT SHIP TO THE UK
Cage it Dailyable drift car
Josh …. Start of video u didn’t have black eye and 6min in u do 🤗 did ya walk into something and not tell 😂🤷🏻♂️
probably haha
Josh fuckin fair play to ya lad it doesn't need to b pristine as long as it looks good from a far fuck dave and the pristine yokes lol DIY jobs lmao
🤤🤙
Hey guys did I win something on your last video? Just wondering because I never used telegram before
No, it's bots. Unfortunately they never used to infest this channel.
@@dkinclonberne thanks for letting me know
:)