RESTORATION OF Abandoned ANTIQUE CHAIRS IN A FIREWOOD KITCHEN - INTERIOR RESTORATION

Поділитися
Вставка
  • Опубліковано 25 чер 2024
  • Hello everyone !
    Today I restored an antique chair with good quality wood, even if left outside in the rain and sun, it is unlikely to be damaged or termite-ridden. It consisted of many damaged chairs so the owner put it in a wooden warehouse. I reused the parts that fell off and pieces of old wood that were the same type of wood as it but couldn't match the color because of time. different pieces of wood. I had to use a wood stain to clean the missing piece of wood in a different color so it would closely match the wood color of the chair. In the end it was finished beautifully, almost like new although the cracks were still visible. I use rudimentary tools so I cannot avoid mistakes and imperfections. I hope to receive everyone's comments and sympathy to gradually improve. Thanks a lot.
    Everyone who watches the video, remember to leave a comment telling me which country you are from. Wishing everyone a good day.
    - TimeStamps Chapters :
    00:00 RESTORATION OF ANTIQUE CHAIRS (Preview)
    00:37 Vacuum dust from old chairs
    01:10 Vacuum the wooden planks that fell off the old chair
    01:20 Remove the remaining planks on the old chair
    01:39 Use a drill to loosen rusty nails stuck to wood
    01:48 Remove rusted screws from old chair
    01:54 Remove the barrier holding the wooden board under the seat
    02:23 Use wood glue and screws to reinstall the two broken chair legs
    03:02 Use processed sandpaper to clean the wood on the bottom of the old chair
    03:38 Use wood glue and air nails to install chair boards
    04:54 Cut a piece of old wood of the same type to replace the damaged board
    07:28 Use a small piece of wood and quick glue to fill gaps in wooden boards
    07:55 Install an additional wooden bar to hold underneath the cracked wooden board
    08:01 Use paint remover to remove the old paint on the old chair
    11:47 Fill wood seams and cracks with quick glue and sawdust
    12:30 Use a grinder and vibrator to smooth the surface of old wood
    14:16 Use homemade rotary sandpaper to clean and smooth the wood surface at the bent corners of old wood
    15:41 Wipe a color on a wooden board that is different from the color of the old chair
    16:53 Apply paint to wood joints and cracks to conceal imperfections
    18:27 Use fine sandpaper to smooth out the painted paint in the cracks so it is uniform in color and free of ripples
    19:02 Repaint a restored antique chair with gloss paint
    21:27 Final performance on the reconstruction and restoration of a damaged antique chair
    #restoration #Furniture Restoration #woodworkingrestoration
  • Навчання та стиль

КОМЕНТАРІ • 61