And these guys are getting paid by the hour on our dime....tsk tsk tsk, not saying that I agree with all their regs but some people did some stupid things and the govt decided we needed a law and here we are, exercise good judgement, pretend your family will be driving behind you the whole time.
A lot of people don’t know your binder technically has is max rated load capability when the threads are 1” from bottoming out. If they are sticking way out on the treads still maybe even half way (but tight)a dot officer can get you for improperly secured load.
Oil your binders and they wont be so hard to work. I also don't like to run my binders all the way out, especially on something really heavy. The more threads you have in your binder once you're done tightening the better.
pulled flatbed lower 48 n Canada 20 years and NEVER did that to keep the chains from turning SM EFFIN H. Duh. Great video. btw never had a damage claim, loss, wreck or shifted load.
It'd be nice to load and secure just one or two machines a day. Local Heavy Equipment Rental Drivers are delivering 4-8 times per day and Picking up the same.....60% of locations are downtown!! 😅 tendinitis is a guarantee
But at 3:45 is only 3300lbs not 6600 because it’s not going across the entire load. 3300 x 4 for all 4 corners is 13,200lbs. One chain going across the bucket with one binder so 6600lbs, there’s 19,800lbs. You have to do the front bucket so there’s 2 chains and 2 binders for each corner of the bucket, so 3300 x 2 = 6600 + 19800 = 26,400lbs. They need 50% of the backhoe weight and that weights roughly 27,000lbs like ours
That's right, u pencil pushers keep telling the working man how to do their job! Pretty soon when the older experienced operators are gone, all common sense will be gone too!
3:20 mark shows cross chains touching, a DOT infraction. Chains must have protection to prevent rubbing. 5:20 as well
And these guys are getting paid by the hour on our dime....tsk tsk tsk, not saying that I agree with all their regs but some people did some stupid things and the govt decided we needed a law and here we are, exercise good judgement, pretend your family will be driving behind you the whole time.
What's your reference for this? It is not in the FMCSA Driver's Handbook on Cargo Securement nor can I find any other supporting documentation.
A lot of people don’t know your binder technically has is max rated load capability when the threads are 1” from bottoming out. If they are sticking way out on the treads still maybe even half way (but tight)a dot officer can get you for improperly secured load.
WE ARE ALL VERY LUCKY THAT SWIFT DOES NOT HAUL HEAVY EQUIPMENT. !!!!
Yet haha
Straight chain pulls are more effective and safer than crossing chain tie downs !
very good video, very informative, about the subject.
Oil your binders and they wont be so hard to work. I also don't like to run my binders all the way out, especially on something really heavy. The more threads you have in your binder once you're done tightening the better.
Don't use oil, it attracts dirt. Use graphite powder spray instead.
When ever I cross chains I always put a plastic pallet in between to stop chains from rubbing.2x zippy ties to hold it on.
Plastic pallet angle sorry ,in regards to last comment.
What you are doing is something special and wonderful More info
Snaps are the best to use
pulled flatbed lower 48 n Canada 20 years and NEVER did that to keep the chains from turning SM EFFIN H. Duh. Great video. btw never had a damage claim, loss, wreck or shifted load.
Good information.
Great video well explained
It'd be nice to load and secure just one or two machines a day. Local Heavy Equipment Rental Drivers are delivering 4-8 times per day and Picking up the same.....60% of locations are downtown!! 😅 tendinitis is a guarantee
Thanks
But at 3:45 is only 3300lbs not 6600 because it’s not going across the entire load. 3300 x 4 for all 4 corners is 13,200lbs. One chain going across the bucket with one binder so 6600lbs, there’s 19,800lbs. You have to do the front bucket so there’s 2 chains and 2 binders for each corner of the bucket, so 3300 x 2 = 6600 + 19800 = 26,400lbs. They need 50% of the backhoe weight and that weights roughly 27,000lbs like ours
Amazing how many people haul this stuff and have no clue...
The backhoe bucket wasn’t all the way down against the trailer deck and dummy was chatting about making sure every thing was down and secure 🤣🤣😂
does the info and regulations on this video apply only Alaska or all 48 states? awesome video, very detailed...thanks
Load Securement Standard 10 is North America wide.
How to chain down my dad's kubtoa l5030 onto a flat trailer
I can’t hear the guy talking over the stupid disco music
15 feet is piss all.
That's right, u pencil pushers keep telling the working man how to do their job! Pretty soon when the older experienced operators are gone, all common sense will be gone too!
blaa blaa blaa blaa
So true
Cheap made in China binders
Que??? no entiendo. yo Argentino.