03 4 hours of continuous shooting, for a total of one full day Overwork shooting set for ZV-E10

I don't want to be interrupted by a lack of battery power in the middle of shooting, so I just want to be able to shoot continuously for a long time, all day long.
This was the beginning.
I bought NP-F550*2 to NP-F970*4 (I didn't want to buy additional batteries, so I bought the whole set at once), plus NP-FW50*3, so the total shooting time exceeds 24 hours, if it is not winter.
(Although I don't have enough media for such hours.)
I hope you will enjoy looking at this case rather than using it as a reference.
This is a case of fixed shooting, so I will show you the configuration when using a gimbal in a separate video.
You can shoot as long as the gimbal battery is left.
We will not use a mobile battery with a USB coupler for the following reasons. (It is not possible).
When the camera is turned off, the mobile battery also goes to sleep, and the procedure for resuming shooting becomes complicated.
When using interval shooting (stills), there is a large possibility that the shutter motor will be down when it starts up.
　The voltage drop in response to the increase in current during mechanical operation is significant, so the load on the camera's power supply is also a concern.
Large capacitors are usually thin, so it is difficult to mount them because they are too large in the longitudinal direction.
Durability and quality (stiff cables, etc. are difficult to use, and voltage stability...)
#Long time shooting
#ZV-E10
#NP-F battery