3:37 If you have a nautical almanac, a sextant, and an accurate timekeeper, then electronic devices are not necessary. You will need a log to measure speed over the water, a magnetic compass to determine direction, and you should measure the boat's speed over the water every 30 minutes to ascertain your position.
FIRST thing i would have bought if i was buying that boat and was planning long haul passages would be a windvane , electronics in a water environment can never be relied on . A good compass and a windvane is the best redundency .
Windvanes are great, I had one on my last Atlantic crossing 30 years ago but they don’t suit all hull shapes or steer a very accurate course downwind which is challenging in a following sea. We only used ours during daylight to save power and used the Autohelm at night for safety. If budget allows I will be carrying a spare Autohelm on my next crossing and lots of spare bolts. Having a second control unit down below out of the weather is also critical
Yeah totally agree with not being able to rely on the electronics. That’s a hard one though as weren’t keen on having a wind vane, as handy as they are, we then can’t use the davits we created for our dinghy. But we would’ve loved to buy a whole new autopilot if we could have afforded to for sure! If we waited that extra year it definitely would’ve been on the list. And Like you guys said @Osprey our friends had quite a bit of trouble with their wind vane in the Atlantic and had to change course for Barbados as it wasn’t steering them in the right direction. And now they never use it but it’s just sitting at the back of their boat and they’ve obviously drilled big holes in the fibreglass now 😏
Of all of your videos to date, I believe this is one of your top video’s. The editing on the subject content and sharing the vulnerability you had, and Jason’s ability to be a confident Captain, was excellent. Jason and you, showing your ability to rise up to challenges, thinking out of the box, being MacGyver, to keep the boat and systems going. Now that you guys have experienced this, you have much more confidence with life’s challenges, stories to tell when you are old, and a bond with the others that crossed at the same time. As this was one of the most challenging conditions in years for the crossing. Your editing of showing the conditions were good. But as you know, no where near actually experienced, as the camera just can’t show the sheer power and size of the swell. Oh yes, what a “pick me up”, to have a shower and decent meal!! Again, nice job on the video and sharing it. I hope viewers get a feel for how it is for doing passages, as even a short overnight one, can be just as challenging, not easy life as many portray on UA-cam. ⛵️😎
Awww thanks so much!! Such a lovely comment and we’re so glad you enjoyed us showing our vulnerability and what it really can be like out there, mistakes and all Cheers ☺️🫶🏼❤️🏴☠️
I'm very late to this UA-cam channel but I'm catching up on some of your videos. This video felt very real and I really do appreciate you guys sharing the problems and how you managed to deal with it, I'm sure it can help others as they're in a similar situation. Thank you very much for the efforts filming these episodes as you're out there on the sea!
Having just watched the first episode..I couldn’t go to bed without watching the second..it’s freezing cold here just gone 4am in regional Victoria Australia..kids your both legends!!..you jumped every obstacle that came your way & came out the other side..I’m blown away by your achievements the enormity of it all will live with you both forever! Aussies rule!
Being asked for money, I’m reminded of a scene on the movie The Jerk. When a man comes and meets with Steve Martin to ask him for money, Because his upholstery in his jet is old and he’s going to be embarrassed to take his friends to the Super Bowl in it. Both of them end up crying and of course Steve cuts him a check.
I just love how gentle and kind u are to each other. Especially under the stress you were under. Sorry ur crossing was so testing. You did great and obviously survived to tell the tale. Take care of yourselves and each other D xx (fellow Aussie)
Aww thankyou 🥰 there’s definitely some screaming at each that goes on when things don’t go right that just doesn’t get on camera 🤣 but we certainly forget about it pretty quickly and know it’s just because we’re under pressure or scared etc. thanks so much 🫶🏼🙏❤️
If ever a lassie needed a reassuring cuddle it's this lassie, I thought I had bad luck but this was like a training exercise for 'When everything goes wrong !'
Trans Atlantics are a tough challenge. Ive done 3; the first one i was seasick, barely able to stay awake. The second and third were better, able to be down below all the way forward changing guest bunks etc barely registered the boat pitching. 😊
There is an epoxy product called pool patch used for patching swimming pool leaks underwater, it sets up underwater. It works like putty. I have used it many times for non-boating issues and once you jam it into a crack or hole, it sets up very firmly in a matter of minutes. The sailing channel Good, Bad, and Ugly, when they sailed, went from Florida to San Juan with pool patch plugging a hole in their hull. I would never recommend what they did, but it demonstrates the strength and reliability of that product.
Yes , this works on fiberglass boats the one I used to keep on boar was I a log you just kneed it and then jam it in the crack or hole as said it sets up in about 10 minutes if it’s deep under the water you may have to hold it in place to get a good seal . Keep more than one on board as you will find many convenient uses for it .
Toilet wax sealer rings are meant to work also , mouldable and can be shoved into leaks including immersed. There’s products that use the same concept, as well as the more sophisticated epoxy already mentioned
Being a ex merchant seaman you learn one thing what you want and what you get is up to the weather the sea state. I have been flung out of my bunk on a few times, jammed myself in my locker pillow around head stop it banging on the bullkhead. I was the only one that got a nights sleep. I was on a RFA tanker big ship. Her name was OLNA.
Great vid showing the highs and lows, bits of concern and great resilience in the face of all those pesky "boat" issues. Can't wait for the next episode.
Keep your spirits high, mates. Doing the same singlehanded and understand your frustration. Fair winds and following seas ⛵️ awesome video of the reality of boat life ❤
I see where you have received good advise about products to seal leaks. I carry a wax seal that is used to seal toilet fixtures to floor in homes. And others previously mentioned. Love the heavy weather videos , you two do an excellent job!
Slash zone is what you need to have on the boat to stop leaks it sets up underwater and is a must have on all boats. Its a two part epoxy mix it together in water and don't touch anything its a mess.
Thankyou! Yeah it seriously saved us to do that! As much as it was disheartening to add more time to the trip and get stuck in a bunch of squalls that we may not have if we kept on going it was the respite we desperately needed and we wouldn’t hesitate to do it again next time if stuff is going wrong. So glad we understand how to do it now ❤️
I grew up on Loleta. My parents sold after 35 years. :) We live on the beach in FL now, but I'd much rather live back in Chicago. I miss this neighborhood feel.
Well done for sorting out problems on the go and also having the courage to stop and heave to. Hopefully we will see the conditions improve as you progress.
Rowed the Atlantic in 2018-2019… Rowing the Pacific summer of 2025. Currently, saving for a boat I can circumnavigate the planet on… 🤞🏼🙏🏼✝️. Love your channel ! Keep the faith. 56 days from the Canary Islands to Antigua. You guys got this !!
Thoroughly enjoyed your video and the common sense way you handled adversity. You can't cross oceans without something going wrong and testing your ability to cope, but as you gain experience the issues that cause alarm now will become more like unscheduled routine maintenance. Thanks again.
I live near the bay of fundy I know how rough the water can be that's why you'll never see me out in the atlantic ocean in a tiny boat, I think the drake passage,bering sea and the atlantic ocean are 3 oceans sail boats is a poor choice
Hi guys, I’m so sorry you had such a rough passage. Kudos for hanging in there together. You did well as challenging as it was you did well. The kitties looked terribly distressed, getting tummy, rubs, and loves and what have you Although Luna was rather vocal. Most definitely glad you invested in what you needed for safety. Smart. I’m really sorry about your hand. I hope it’s feeling much better now. Highly recommend a good lavender essential oil It’s good for cut scrapes, bruises and swelling. Natural antibiotic and natural antiseptic. Seems like you guys were really tested on this passage. I think you passed with flying colors. You may have a lot of work ahead of you. Do you have any idea how hard it is watching you guys I’m waiting for the commercials to to go through their motions to get back to you. Some of them are so incredibly long and involved and you’ve seen it 1000 times. But I did my part. Went to the bathroom got a snack so that you will get credit for it. Love you both stay safe and Fairwinds 🤟🏻😎💜⛵️🐬 from LIZ in California🇺🇸
Yessss that’s exactly what happened to us. Tried using our fingers, tried using a brush I think maybe the only thing that would work is a wooden mixing stick. It worked pretty well to plug a tiny hole where it went inside but did not work well at all on the surface around the stainless at all
The only success I had was if I used wet fingers and also kneaded it into a ball before trying to put it on the hull but it was very hit and miss. I have a timber hull so thought it was because of that but glad to hear it’s also hard on other surfaces.
@@Choppingwoodcarryingwater_ ah that’s good to know! We can keep it anyway I suppose but yeah I definitely wouldn’t ever be relying on it and would get a few options for next time 😅
Wow what an emotional video, it looks like the cats gave you lots of love and support just when you needed it. Well done for fixing stuff on the run and problem solving to keep you going. One product I’ve just used to fix a ding on the bow from the dinghy is JB water weld. It works under water and the dings are now fully covered. I picked up a review on utube somewhere a few months ago. I’m also looking for jb steel stick which also apparently very good. Jb water weld was £5 for a small stick. You mix the putty style paste together in your fingers till the colour blends and it goes hard in about 15 minutes. It goes a long way. I think it’s one of the better products out there.
JB Waterweld is good stuff - apply even when surfaces are wet. Stay afloat is popular too but I've not used it myself. Doesn't help you mid Atlantic but products to add to your tool kit when you can. Love your vlogs and how well you work together. Safe seas and good wind x
Well done for getting through it and working together to overcome the difficulties. I'm sure after some R&R you guys will feel a huge sense of accomplishment and so you should doing yourselves proud. Nice job
Oh guys, seeing the footage after knowing everything that you guys went through on that crossing was wild. Also all the boat background noises in your videos was super freaky while I watched in the middle of the Pacific Ocean with my own boat noises in the background ! Had to take the EarPods out a couple of times to make sure the noise was in the video and not our boat 🤣😂 Anyway well done, miss you guys 😘
Yeah it wasn’t ideal and we didn’t even get the half of it on camera either 😣 I guess some people would’ve found these problems pretty minuscule but I was not coping well with it at all ☹️ Oh my gosh!!! I don’t even know how you’re watching this shit when you’re mid ocean 😅 that is dedication! We miss you guys so much!!! 😘😘😘
First class as always… love the content you put out and if anyone wants to know what sailing long distances is like… watch your shows! You are both developing into excellent resourceful sailors… ❤
Flexseal! If the advertisements are half true, it’s pretty amazing. There are some ads on UA-cam. It’s a real product even if the ads seem over the top. Probably not considered marine grade, but it comes as a spray, tape, paint…
For gorgeous mermaid the trip is hard, but Jason has the most beautiful sail companion, so he has it great no matter how the trip is. Joking a part, congrats on your courage and resiliance, we will see you on the Caribean soon. Love, OsoYolo, Antigua Guatemala.
Some epoxies can't get wet. Stick hard to boat products. Sawdust is the best travel cat litter. Although you have no fleas on boats, a flea comb can keep cats from upchucking fur they swallowed. A CB radio is an extra way to have random long distance communications and it's free. I won't trust a single boat fridge, and 12 volt chest freezers are now so cheap. Run them on ECO mode only. Carry extra hardware and materials and files for repairs.
pool putty and, for the auto pilot, it is likely that you need a clevis pin, not a bolt. Iknow the transit must have been a challenge but you made a great video. Thank you for posting.
You are doing great! Stick to the basics. All you really need is for the rig to stay up, the rudder to stay in the hull, a sextant, watch, hard tack, and some fresh water. Everything else is gravy.
Hope you guys are going well. Really grateful for this episode as as I intend doing the Atlantic crossing from Eu in 2025 or 2026, at this stage, solo. So I was definitely taking notes, especially when your autopilot stopped working. Once again, I REALLY hope you guys are ok and have no more trouble on the crossing. Be safe.
Thanks so much 🫶🏼 We’ll have to do a chat video with things we learned and what advice we would give others from things we overlooked or mistakes we made for sure!! If you’re going solo I would highly recommend an entire second autopilot system plus numerous bolts. But just don’t go in conditions we did and I’m sure you’ll be fine in that regard 😅 We wish you the best for your crossing and definitely come back here and let us know how your plans eventuate for it ☺️ Thanks so much for your well wishes, cheers 😁
@@LeadingtheEscapade One thing I forgot to mention is how amazingly brave I think you two are. If you can do this you can do anything. You're an inspiration to people like me who get scared when they can still see land in 25 knots and 2m waves on a day sail! Absolutely phenomenal effort!
Ohh yeah 😅 we didn’t want to install a wind vane as we then wouldn’t be able to use our davits to pull up our dinghy. However we would’ve loved to have been able to purchase a second autopilot to install
If you get into your tuning of the autopilot you can set the program to not adjust quickly as you see your stearing adjust on each wave. Ther is no reason to do that. it can adjust every 30 monutes on PID control and you will not wear out your equipment so fast. I will lower the heat disipated in the control board as well. There is no reason to stear on each wave even if yor were etrating manually. You would use you sextant daily and make course corrections or today GPS.
Hi guys, well done that became a bit nasty didn’t it. Also well done for fixing the steering that was great. I don’t know if you new this but cats are great swimmers🥴🥴jon
I have heard many times about Raymarine, specifically Seatalk, wiring and connectors failing. Unfortunately it is so incredibly expensive to change the electronics on a boat.
Ahh interesting 🤔 that’s exactly what we had issues with. But yeah it’s just so god damn expensive to upgrade, especially because the previous owners installed a lot of instruments so upgrading them all so they all sync up would be a huge expense
I know 🙈 I think more so what I mean by it is the problems kept piling ontop of each other and we were just getting further in trouble without feeling like we were getting ontop of it all
Leaks: We carry a hole kit that includes tapered wood plugs for 1-3” holes, rubber plugs small to 1”, wine corks etc. Thick rubber pool liner works well with sicka flex calking and a plywood backing screwed into the hull. Sickaflex works reasonably well to temporarily plug leaking port lites, cracks hatches etc. Epoxy does not work on wet surfaces such as saturated fiberglass. Pool patch also works reasonably well on wet surfaces as a temporary fix. If the leak is fiberglass you will need to dry it out before a proper patch can be applied. See West Systems guide for an ABYC Certified hole repair. Simply put grind out the area, dry and repair with cloth and epoxy build up. Through hulls need to be removed and re bedded. Any wet or rotted fiberglass needs to be ground out and the hole needs to be filled per West Systems, bored out clean and re-bedded. I suggest having Nigel Calendars boat maintenance guide and west systems repair publications on board. Electrical connections / terminals must be treated with Corrosion block and the connection covered with shrink. Electrical is the most sensitive and dangerous system on a boat. I do all my own electrical strictly to ABYC Standards Plus corrosion bloc. Anything less will become very expensive, unreliable and dangerous. Electrical and fuel problems are what keep me awake at night both can result in catastrophe quickly. The ocean is not to be taken lightly,especially when you long term cruise, luck and poor quality repairs come back to bite. Captain Dan George
Leaks are not normal. Sure, regular sikafkex will break down over a decade (or longer), so fittings etc have to be periodically re-bed, but provided you stay on top of that maintenance, you should be good. I have zero leaks on my boat.
Yeah for sure, I agree! This was a newly installed solar arch about 6/7 months prior (and the guy used sikaflex when installing) but we hadn’t had a problem til that moment as I guess we hadn’t been constantly healed over with big swell for a long period of time yet where the water was constantly pooling in that area. Definitely time for some maintenance on the stanchions etc though, they definitely need re-bedding
I bet your spares list gets a whole lot longer ! Jason is going to have a half dozen AP bolts , 100 pack of fuses , and a couple of extra wires for the electronics. I have a friend who has an entire set of electronics spare he has bought used. They’re older so they were cheap used. Same with his AP. A complete system spare bought used. I hope the Caribbean is everything and more than you hoped for.
Hahahah literally 🤣 to be honest we were actually meant to get a bunch of fuses and after not finding a good kit back in July at a chandlery we put it on thr back burner and in the craziness of all the prep work we completely forgot, so we were definitely kicking ourselves for that one 😩 they are now on order from Amazon 😆 Yesss we would LOVE to have a spare autopilot! Thanks so much ❤️🫶🏼☺️
I have to do this same journey in the next couple of months, so very interested in the details. To fix leaks there are epoxies specially for this but I use Gorilla Glue, which you can get in the US easily. Keep your eyes out for it. Dirt cheap and effective. It is a single part foaming polyurethane that is set of by moisture. So for a leak through the hull you would attempt to have this on a clothe that you can press up against the hole and keep as confined as possible so the foam can expand into the area of the leak. I haven’t tried this yet but feel confident it will work. I use the Gorilla glue for any plumbing especially with pipes with ribs in them. The GG fills the gaps and foam seals. I have the same autopilot as yours so am interested in how robust it is. When buying safety critical parts such as steering pins always buy multiple, never just one. Glad your hand came good quickly. Guys don’t think too much of stuff like that as we are destroying our bodies steadily all day long.
There are epoxy putty that will cure even under water, and an excellent item to have in your hull repair kit. Along with Flex Seal products or equivalent 3m or Gorilla. Heaving too, can help with slowing the leak, making a better opportunity to succeed with the fixing. ⛵️😎
3:37
If you have a nautical almanac, a sextant, and an accurate timekeeper, then electronic devices are not necessary. You will need a log to measure speed over the water, a magnetic compass to determine direction, and you should measure the boat's speed over the water every 30 minutes to ascertain your position.
You need a hydrovane to be less reliant on electronics; also set up ‘Sheet to Tiller’ steering for emergencies.
FIRST thing i would have bought if i was buying that boat and was planning long haul passages would be a windvane , electronics in a water environment can never be relied on .
A good compass and a windvane is the best redundency .
Windvanes are great, I had one on my last Atlantic crossing 30 years ago but they don’t suit all hull shapes or steer a very accurate course downwind which is challenging in a following sea. We only used ours during daylight to save power and used the Autohelm at night for safety. If budget allows I will be carrying a spare Autohelm on my next crossing and lots of spare bolts.
Having a second control unit down below out of the weather is also critical
Yeah totally agree with not being able to rely on the electronics. That’s a hard one though as weren’t keen on having a wind vane, as handy as they are, we then can’t use the davits we created for our dinghy. But we would’ve loved to buy a whole new autopilot if we could have afforded to for sure! If we waited that extra year it definitely would’ve been on the list.
And Like you guys said @Osprey our friends had quite a bit of trouble with their wind vane in the Atlantic and had to change course for Barbados as it wasn’t steering them in the right direction. And now they never use it but it’s just sitting at the back of their boat and they’ve obviously drilled big holes in the fibreglass now 😏
Of all of your videos to date, I believe this is one of your top video’s. The editing on the subject content and sharing the vulnerability you had, and Jason’s ability to be a confident Captain, was excellent. Jason and you, showing your ability to rise up to challenges, thinking out of the box, being MacGyver, to keep the boat and systems going.
Now that you guys have experienced this, you have much more confidence with life’s challenges, stories to tell when you are old, and a bond with the others that crossed at the same time. As this was one of the most challenging conditions in years for the crossing. Your editing of showing the conditions were good. But as you know, no where near actually experienced, as the camera just can’t show the sheer power and size of the swell.
Oh yes, what a “pick me up”, to have a shower and decent meal!! Again, nice job on the video and sharing it. I hope viewers get a feel for how it is for doing passages, as even a short overnight one, can be just as challenging, not easy life as many portray on UA-cam. ⛵️😎
Awww thanks so much!! Such a lovely comment and we’re so glad you enjoyed us showing our vulnerability and what it really can be like out there, mistakes and all
Cheers ☺️🫶🏼❤️🏴☠️
I'm very late to this UA-cam channel but I'm catching up on some of your videos. This video felt very real and I really do appreciate you guys sharing the problems and how you managed to deal with it, I'm sure it can help others as they're in a similar situation. Thank you very much for the efforts filming these episodes as you're out there on the sea!
Hats off to you two for hanging in there. Supporting each other in crap conditions is so important. Keep smiling 🥰🥰
Never fear the unknown and never be scared of change. Good luck and God bless
Having just watched the first episode..I couldn’t go to bed without watching the second..it’s freezing cold here just gone 4am in regional Victoria Australia..kids your both legends!!..you jumped every obstacle that came your way & came out the other side..I’m blown away by your achievements the enormity of it all will live with you both forever!
Aussies rule!
That is dedication haha!! Hope it’s not too cold there today! Thanks so much for tuning in and for your compliments and well wishes 😆🫶🏼❤️
Being asked for money, I’m reminded of a scene on the movie The Jerk. When a man comes and meets with Steve Martin to ask him for money, Because his upholstery in his jet is old and he’s going to be embarrassed to take his friends to the Super Bowl in it. Both of them end up crying and of course Steve cuts him a check.
Wow
This is terrific 😮
I just love how gentle and kind u are to each other. Especially under the stress you were under. Sorry ur crossing was so testing. You did great and obviously survived to tell the tale. Take care of yourselves and each other D xx (fellow Aussie)
Aww thankyou 🥰 there’s definitely some screaming at each that goes on when things don’t go right that just doesn’t get on camera 🤣 but we certainly forget about it pretty quickly and know it’s just because we’re under pressure or scared etc. thanks so much 🫶🏼🙏❤️
What an awesome achievement it is to do an ocean crossing - legends. and why to go team for being there for each other!
Amazing experience that will give you so much knowledge for future preparations. Living life to the full!
For sure ☺️ thanks so much
If ever a lassie needed a reassuring cuddle it's this lassie, I thought I had bad luck but this was like a training exercise for 'When everything goes wrong !'
Congratulations, this is it.❤
Use Splash Zone to plug wet leaks. Works underwater too.
Trans Atlantics are a tough challenge. Ive done 3; the first one i was seasick, barely able to stay awake. The second and third were better, able to be down below all the way forward changing guest bunks etc barely registered the boat pitching. 😊
Wow you really had a rough go of it. Glad to know you made it safely.
ill, injured, tired and tossed about, yes you are in the great atlantic ocean lol wooooo! ✊🏻
appreciate you sharing the real life of sailing, helps us learn before taking plunge. You are handling the trails well. hope the weather mellows soon
There is an epoxy product called pool patch used for patching swimming pool leaks underwater, it sets up underwater. It works like putty. I have used it many times for non-boating issues and once you jam it into a crack or hole, it sets up very firmly in a matter of minutes. The sailing channel Good, Bad, and Ugly, when they sailed, went from Florida to San Juan with pool patch plugging a hole in their hull. I would never recommend what they did, but it demonstrates the strength and reliability of that product.
Oh thanks so much that’s great to know!!
Yes , this works on fiberglass boats the one I used to keep on boar was I a log you just kneed it and then jam it in the crack or hole as said it sets up in about 10 minutes if it’s deep under the water you may have to hold it in place to get a good seal . Keep more than one on board as you will find many convenient uses for it .
Can you share a link for the product?
Toilet wax sealer rings are meant to work also , mouldable and can be shoved into leaks including immersed. There’s products that use the same concept, as well as the more sophisticated epoxy already mentioned
Polyester car body filler also works pretty well, loads cheaper
It always amazes me that a small boat can get in the way of another boat in that huge ocean.
Being a ex merchant seaman you learn one thing what you want and what you get is up to the weather the sea state. I have been flung out of my bunk on a few times, jammed myself in my locker pillow around head stop it banging on the bullkhead. I was the only one that got a nights sleep. I was on a RFA tanker big ship. Her name was OLNA.
saw OLNA in the SA in 82
wow that sure to bring up the gifts..well done for keeping the Faith !
My sphincter is puckered and I’m seasick just watching this video. I feel for you both. Smooth sailing ahead I’m sure.
Great vid showing the highs and lows, bits of concern and great resilience in the face of all those pesky "boat" issues. Can't wait for the next episode.
Nail biting stuff, excellent video, the way you guys cope with all the challenges, marvellous. Be very proud of yourselves, best of luck.
Keep your spirits high, mates. Doing the same singlehanded and understand your frustration. Fair winds and following seas ⛵️ awesome video of the reality of boat life ❤
I see where you have received good advise about products to seal leaks. I carry a wax seal that is used to seal toilet fixtures to floor in homes. And others previously mentioned. Love the heavy weather videos , you two do an excellent job!
Slash zone is what you need to have on the boat to stop leaks it sets up underwater and is a must have on all boats. Its a two part epoxy mix it together in water and don't touch anything its a mess.
That's a great video! Impressed you hove-to for 8 hrs while you sorted things out. That was good thinking
Thankyou! Yeah it seriously saved us to do that! As much as it was disheartening to add more time to the trip and get stuck in a bunch of squalls that we may not have if we kept on going it was the respite we desperately needed and we wouldn’t hesitate to do it again next time if stuff is going wrong. So glad we understand how to do it now ❤️
Nice thank you for sharing 😊
I grew up on Loleta. My parents sold after 35 years. :) We live on the beach in FL now, but I'd much rather live back in Chicago. I miss this neighborhood feel.
Its a challenge guys. Its a test of your courage and confidence. You guys are doing great. 👍🏾 ❤❤❤❤❤
Well done for sorting out problems on the go and also having the courage to stop and heave to. Hopefully we will see the conditions improve as you progress.
Flex Seal Flex Paste Rubber Paste… I used this to repair our row boat while crossing the Atlantic during the Talisker Whiskey Atlantic Challenge race.
This is epic! You rowed across the pacific!!! You guys that do this are the real legends!!! Thanks for watching our channel ☺️😆 cheers
Rowed the Atlantic in 2018-2019… Rowing the Pacific summer of 2025.
Currently, saving for a boat I can circumnavigate the planet on…
🤞🏼🙏🏼✝️. Love your channel ! Keep the faith. 56 days from the Canary Islands to Antigua. You guys got this !!
Plastic Padding is a product that I have used. It sticks to most things. I used it to stop a leak in a petrol tank.
Thoroughly enjoyed your video and the common sense way you handled adversity. You can't cross oceans without something going wrong and testing your ability to cope, but as you gain experience the issues that cause alarm now will become more like unscheduled routine maintenance. Thanks again.
The highs are so awesome the lows are so heavy.
You did an incredible job together. Congratulations ❤️
I live near the bay of fundy I know how rough the water can be that's why you'll never see me out in the atlantic ocean in a tiny boat, I think the drake passage,bering sea and the atlantic ocean are 3 oceans sail boats is a poor choice
JB Weld would be good to keep on your boat for leaks
Loved the editing , great work.
Denso tape , , ,messy but handy or waterproof gorilla seal
You two are LEGIONS. Passages always present challenges, but you persevered. Cheers!
Those were really horrible circumstances, sorry it was such a difficult passage
Thankyou ❤️
your very brave doing that journey , my boating consists of Boarding HOPO on the Nerang river ,
Best thing for leaks is "Splash" works great, and works under water.
Hi guys, I’m so sorry you had such a rough passage. Kudos for hanging in there together. You did well as challenging as it was you did well. The kitties looked terribly distressed, getting tummy, rubs, and loves and what have you Although Luna was rather vocal. Most definitely glad you invested in what you needed for safety. Smart. I’m really sorry about your hand. I hope it’s feeling much better now. Highly recommend a good lavender essential oil It’s good for cut scrapes, bruises and swelling. Natural antibiotic and natural antiseptic. Seems like you guys were really tested on this passage. I think you passed with flying colors. You may have a lot of work ahead of you.
Do you have any idea how hard it is watching you guys I’m waiting for the commercials to to go through their motions to get back to you. Some of them are so incredibly long and involved and you’ve seen it 1000 times. But I did my part. Went to the bathroom got a snack so that you will get credit for it.
Love you both stay safe and Fairwinds 🤟🏻😎💜⛵️🐬 from LIZ in California🇺🇸
Oh I’ve used that waxy goop too and it’s terrible!! It gets everywhere but where it’s supposed to be !
Yessss that’s exactly what happened to us. Tried using our fingers, tried using a brush I think maybe the only thing that would work is a wooden mixing stick. It worked pretty well to plug a tiny hole where it went inside but did not work well at all on the surface around the stainless at all
The only success I had was if I used wet fingers and also kneaded it into a ball before trying to put it on the hull but it was very hit and miss. I have a timber hull so thought it was because of that but glad to hear it’s also hard on other surfaces.
@@Choppingwoodcarryingwater_ ah that’s good to know! We can keep it anyway I suppose but yeah I definitely wouldn’t ever be relying on it and would get a few options for next time 😅
Wow what an emotional video, it looks like the cats gave you lots of love and support just when you needed it. Well done for fixing stuff on the run and problem solving to keep you going. One product I’ve just used to fix a ding on the bow from the dinghy is JB water weld. It works under water and the dings are now fully covered. I picked up a review on utube somewhere a few months ago. I’m also looking for jb steel stick which also apparently very good. Jb water weld was £5 for a small stick. You mix the putty style paste together in your fingers till the colour blends and it goes hard in about 15 minutes. It goes a long way. I think it’s one of the better products out there.
JB Waterweld is good stuff - apply even when surfaces are wet. Stay afloat is popular too but I've not used it myself. Doesn't help you mid Atlantic but products to add to your tool kit when you can. Love your vlogs and how well you work together. Safe seas and good wind x
Wow! It’s not getting any easier!
Another great video.
Well done for getting through it and working together to overcome the difficulties. I'm sure after some R&R you guys will feel a huge sense of accomplishment and so you should doing yourselves proud. Nice job
thiss is a hemingway "grace under pressure". you guys did great
Oh guys, seeing the footage after knowing everything that you guys went through on that crossing was wild. Also all the boat background noises in your videos was super freaky while I watched in the middle of the Pacific Ocean with my own boat noises in the background ! Had to take the EarPods out a couple of times to make sure the noise was in the video and not our boat 🤣😂
Anyway well done, miss you guys 😘
Yeah it wasn’t ideal and we didn’t even get the half of it on camera either 😣 I guess some people would’ve found these problems pretty minuscule but I was not coping well with it at all ☹️
Oh my gosh!!! I don’t even know how you’re watching this shit when you’re mid ocean 😅 that is dedication!
We miss you guys so much!!! 😘😘😘
First class as always… love the content you put out and if anyone wants to know what sailing long distances is like… watch your shows! You are both developing into excellent resourceful sailors… ❤
Thanks, so nice to see how you fix the problems! I love your youtube channel! So transparant. ❤
Hope that hand heals quick Janaye
I think it’s time to get off the boat for a while maybe three months recharge hit again😮
Try a product called Milliput… very useful product..even sets underwater….used to repair areas of the Barrier reef in Australia…give it a try!!!.
Flexseal! If the advertisements are half true, it’s pretty amazing. There are some ads on UA-cam. It’s a real product even if the ads seem over the top. Probably not considered marine grade, but it comes as a spray, tape, paint…
For gorgeous mermaid the trip is hard, but Jason has the most beautiful sail companion, so he has it great no matter how the trip is. Joking a part, congrats on your courage and resiliance, we will see you on the Caribean soon. Love, OsoYolo, Antigua Guatemala.
3M 5200 and a rag is a well known sailors trick for leaks.
Good job of getting through a really tough time 😊
Hi c t 1 works in water best for leaking boats
Some epoxies can't get wet. Stick hard to boat products. Sawdust is the best travel cat litter. Although you have no fleas on boats, a flea comb can keep cats from upchucking fur they swallowed. A CB radio is an extra way to have random long distance communications and it's free. I won't trust a single boat fridge, and 12 volt chest freezers are now so cheap. Run them on ECO mode only. Carry extra hardware and materials and files for repairs.
pool putty and, for the auto pilot, it is likely that you need a clevis pin, not a bolt. Iknow the transit must have been a challenge but you made a great video. Thank you for posting.
Thanks guys..
Keep the Faith
To fix leaks in an emergency, I recommend "Butyl Flash Sealant Tape" by a company called "DIY DOCTOR", you can apply it underwater.
Ahhhh yes I’ve heard of butyl tape loads of times!
Ay least you both worked as a team. Congrats
You guys handled this well, thanks for sharing!
Hey sweetpeas, proud of y’all. Appreciate you bringing us along ✌️
You are doing great! Stick to the basics. All you really need is for the rig to stay up, the rudder to stay in the hull, a sextant, watch, hard tack, and some fresh water. Everything else is gravy.
Totally!! Great way to look at it as sometimes we can definitely get in our own head sometimes
Hope you guys are going well.
Really grateful for this episode as as I intend doing the Atlantic crossing from Eu in 2025 or 2026, at this stage, solo. So I was definitely taking notes, especially when your autopilot stopped working.
Once again, I REALLY hope you guys are ok and have no more trouble on the crossing.
Be safe.
Thanks so much 🫶🏼 We’ll have to do a chat video with things we learned and what advice we would give others from things we overlooked or mistakes we made for sure!! If you’re going solo I would highly recommend an entire second autopilot system plus numerous bolts. But just don’t go in conditions we did and I’m sure you’ll be fine in that regard 😅
We wish you the best for your crossing and definitely come back here and let us know how your plans eventuate for it ☺️
Thanks so much for your well wishes, cheers 😁
@@LeadingtheEscapade Thank you so much.
Can't wait for that episode!
@@LeadingtheEscapade One thing I forgot to mention is how amazingly brave I think you two are. If you can do this you can do anything. You're an inspiration to people like me who get scared when they can still see land in 25 knots and 2m waves on a day sail! Absolutely phenomenal effort!
First sailing vid I’ve seen where the waves are, nerve wracking
Thankyou 😅 you know when they actually show on camera that they’re pretty decent 😬
we all love you mates , pls keep going
Great Job you two.
There's a reason why long distance cruisers fit mechanical wind vanes, rather than rely on an autopilot. That's a long way to hand steer.
Ohh yeah 😅 we didn’t want to install a wind vane as we then wouldn’t be able to use our davits to pull up our dinghy. However we would’ve loved to have been able to purchase a second autopilot to install
Super episode.. Great storytelling!
If you get into your tuning of the autopilot you can set the program to not adjust quickly as you see your stearing adjust on each wave. Ther is no reason to do that. it can adjust every 30 monutes on PID control and you will not wear out your equipment so fast. I will lower the heat disipated in the control board as well. There is no reason to stear on each wave even if yor were etrating manually. You would use you sextant daily and make course corrections or today GPS.
Hope all is well guys.. good luck
You guys will actually be "limping in to port". No worries. Some day you will look back at this trip and laugh.
Hahaha I know 🥲😅 this is so true!! About most things in life hey
Danke!
Thankyou so much for your generosity 🫶🏼☺️❤️
Hi guys, well done that became a bit nasty didn’t it. Also well done for fixing the steering that was great. I don’t know if you new this but cats are great swimmers🥴🥴jon
Leading the Escapade, I really enjoyed watching this, so I hit the like button!
Great show - love your content through this
Thanks so much ☺️
I have heard many times about Raymarine, specifically Seatalk, wiring and connectors failing. Unfortunately it is so incredibly expensive to change the electronics on a boat.
Ahh interesting 🤔 that’s exactly what we had issues with. But yeah it’s just so god damn expensive to upgrade, especially because the previous owners installed a lot of instruments so upgrading them all so they all sync up would be a huge expense
Every dawn ray marine gadget I have ever owned broke. Seems they don't know how to make things water proof
@@ufodude1000Other cruisers have assured me Raymarine is still better than B&G.
Thanks!
Thanks so much for your generosity 🫶🏼
Quite traumatic! The modern electronics are mind boggling. Think I would have stayed in the Med!
I wanted to 😅
You two are amazing ❤❤
At 8:45 Don't think of a it as a 'darker hole'.. its just part of sailing!
I know 🙈 I think more so what I mean by it is the problems kept piling ontop of each other and we were just getting further in trouble without feeling like we were getting ontop of it all
Når drømme bliver til virkelighed, har de det med at hilse "hårdhændet" velkommen!
Troels Kløvedal
Mvh from a Danish sailor
Poor cat.
Leaks: We carry a hole kit that includes tapered wood plugs for 1-3” holes, rubber plugs small to 1”, wine corks etc. Thick rubber pool liner works well with sicka flex calking and a plywood backing screwed into the hull. Sickaflex works reasonably well to temporarily plug leaking port lites, cracks hatches etc. Epoxy does not work on wet surfaces such as saturated fiberglass. Pool patch also works reasonably well on wet surfaces as a temporary fix. If the leak is fiberglass you will need to dry it out before a proper patch can be applied. See West Systems guide for an ABYC Certified hole repair. Simply put grind out the area, dry and repair with cloth and epoxy build up. Through hulls need to be removed and re bedded. Any wet or rotted fiberglass needs to be ground out and the hole needs to be filled per West Systems, bored out clean and re-bedded. I suggest having Nigel Calendars boat maintenance guide and west systems repair publications on board. Electrical connections / terminals must be treated with Corrosion block and the connection covered with shrink. Electrical is the most sensitive and dangerous system on a boat. I do all my own electrical strictly to ABYC Standards Plus corrosion bloc. Anything less will become very expensive, unreliable and dangerous. Electrical and fuel problems are what keep me awake at night both can result in catastrophe quickly. The ocean is not to be taken lightly,especially when you long term cruise, luck and poor quality repairs come back to bite. Captain Dan George
Leaks are not normal. Sure, regular sikafkex will break down over a decade (or longer), so fittings etc have to be periodically re-bed, but provided you stay on top of that maintenance, you should be good. I have zero leaks on my boat.
Yeah for sure, I agree! This was a newly installed solar arch about 6/7 months prior (and the guy used sikaflex when installing) but we hadn’t had a problem til that moment as I guess we hadn’t been constantly healed over with big swell for a long period of time yet where the water was constantly pooling in that area. Definitely time for some maintenance on the stanchions etc though, they definitely need re-bedding
Great stuff
OMG 😱 WOW, you guys ‼️ What a W. I. L. D. ride 😳😳 Happy your wrist is better. Icing was the right thing to do. 👍🏻 See you next time. ✨ 🌊 💨 ⛵️ 🏝️ 👙 🌞 ✨
I bet your spares list gets a whole lot longer ! Jason is going to have a half dozen AP bolts , 100 pack of fuses , and a couple of extra wires for the electronics. I have a friend who has an entire set of electronics spare he has bought used. They’re older so they were cheap used. Same with his AP. A complete system spare bought used. I hope the Caribbean is everything and more than you hoped for.
Hahahah literally 🤣 to be honest we were actually meant to get a bunch of fuses and after not finding a good kit back in July at a chandlery we put it on thr back burner and in the craziness of all the prep work we completely forgot, so we were definitely kicking ourselves for that one 😩 they are now on order from Amazon 😆
Yesss we would LOVE to have a spare autopilot!
Thanks so much ❤️🫶🏼☺️
I have to do this same journey in the next couple of months, so very interested in the details. To fix leaks there are epoxies specially for this but I use Gorilla Glue, which you can get in the US easily. Keep your eyes out for it. Dirt cheap and effective. It is a single part foaming polyurethane that is set of by moisture. So for a leak through the hull you would attempt to have this on a clothe that you can press up against the hole and keep as confined as possible so the foam can expand into the area of the leak. I haven’t tried this yet but feel confident it will work. I use the Gorilla glue for any plumbing especially with pipes with ribs in them. The GG fills the gaps and foam seals.
I have the same autopilot as yours so am interested in how robust it is. When buying safety critical parts such as steering pins always buy multiple, never just one. Glad your hand came good quickly. Guys don’t think too much of stuff like that as we are destroying our bodies steadily all day long.
There are epoxy putty that will cure even under water, and an excellent item to have in your hull repair kit. Along with Flex Seal products or equivalent 3m or Gorilla. Heaving too, can help with slowing the leak, making a better opportunity to succeed with the fixing.
⛵️😎