lmao 6:00 "grab these, throw them in the garbage". So many videos of people struggling with those harness bolts with the manifold still on the car. Glad I found this video before tearing into this project. Thanks!!!
Definitely need an AOS. I installed the IAG AOS on my 2019 STI after having it for only 3 weeks. There was already tons of oil in it with less than 1000 miles on it.
Can you recommend a tuner for the stuff you did but in San Diego? Live in Las Vegas and going to get rid of evap, put on tgv deletes and get rid of air pump. Thanks. Loved the video
Hey thanks for the support. I do not know any Tuners over there I just know Mikey Botti is big on the east coast. Maybe Delicious Tuning on the West Coast but I think in Cali.
What do you do with the TGV connectors? Do you tape them up, is there resistor to install like vw deletes require so codes won’t come up. I think this is causing an issue in my throttle powered wire. The red one.
Great video! Can you point me to where you got your lines and fittings from? Can wrexparts pre-make the same length lines and fittings and sell it to me? I have the same FPR looking to do equal length fuel lines just like this.
Torque Solution sells the lines and fittings. I got the FPR from nipponpower.com. I will ask WRKperts about the line cutting you can also find them @wrxpertsautoworks on insta if you want to reach out to them.
lmao 6:00 "grab these, throw them in the garbage". So many videos of people struggling with those harness bolts with the manifold still on the car. Glad I found this video before tearing into this project. Thanks!!!
Lmao thanks glad we could help!
your videos helped me with my build. keep it up bro
Thanks! Glad we could help 🤙🏼
Definitely need an AOS. I installed the IAG AOS on my 2019 STI after having it for only 3 weeks. There was already tons of oil in it with less than 1000 miles on it.
That is crazy! What did you think about the install?
Why so much oil....thats not good something is wrong
"sexy tuck" haha made my day
Lol glad you enjoyed it thanks for the support!
Great video, needs a lot more likes and views!!
Thank you!! Make sure to share to others that may benefit from it :)
Did the guys install any fuel dampers on both rails?
What do you do with the third fuel line (I think its a vacuum line) that runs from the firewall to the old hard fuel lines on the manifold?
I would double check with the experts @wrxpertsautoworks on Instagram
What about the evap lines? How do you run those after installing a parallel set-up with aftermarket FPR?
WRXperts can help you with any other questions you can reach out to them on Instagram or Facebook
Can you recommend a tuner for the stuff you did but in San Diego? Live in Las Vegas and going to get rid of evap, put on tgv deletes and get rid of air pump. Thanks. Loved the video
Hey thanks for the support. I do not know any Tuners over there I just know Mikey Botti is big on the east coast. Maybe Delicious Tuning on the West Coast but I think in Cali.
What do you do with the TGV connectors? Do you tape them up, is there resistor to install like vw deletes require so codes won’t come up. I think this is causing an issue in my throttle powered wire. The red one.
What gets done with the fuel tank vent hard line? Left vent to atmosphere?
They should have covered that - or it'd have been nice.
You connect it to your fuel vapor purge system mounted on your intake manifold.
WRXperts can help you with that question you can reach out to them on Instagram of Facebook
Is that the aeromotive 13109 regulator?
What kind of grease did you use? I have a molly graphite based assembly lube if I happen to over grease a an fitting will I clog my injectors
To be honest I am not sure if that grease will work. You can ask @wrxpertsautoworks on Instagram they may have the answer to that.
Did that torque solutions fuel line kit include everything you needed? You have to buy anything extra?
To be honest it was awhile ago so I don’t recall off the top of my head. I would just reach out to them and ask just in case.
JotaJota STI appreciate it! I definitely will.
Is this recommend for a automatic??
That is a good question for WRXperts lol you can ask them on their instagram WRXpertsautoworks
What benefit you gain for tgv delete? Thanks!
Better airflow
Great video! Can you point me to where you got your lines and fittings from? Can wrexparts pre-make the same length lines and fittings and sell it to me? I have the same FPR looking to do equal length fuel lines just like this.
Torque Solution sells the lines and fittings. I got the FPR from nipponpower.com. I will ask WRKperts about the line cutting you can also find them @wrxpertsautoworks on insta if you want to reach out to them.
Hey jotajota how much is for labor to do this ?
You can hit up @wrxpertsautoworks on insta and they can give you a quote let them know I sent you!
Why did yall do the hard way?
Share those tips man! What’s the easy way?
Yeah please share the "easy way" of how you do things. Unless you wolfing it 😏
There’s not much choice when you are doing fuel lines.
Don't trow your stock parts in the trash. $ell them !!
I will! Thing is not many people buy them.
How much you want for it?