I have a AVH-501EX pioneer and used a toggle switch and grounded it to the side of the radio. DO NOT FORGET YOU HAVE TO TOGGLE TWICE! Just as the E brake twice
Hmmm I don't think the wire through the harness clip was necessary, it's usually being grounded that allows to circumvent the PBS. The wire through the harness clip isn't making contact with anything...or is it?
I understood everything except why did you put the wire into the white connector empty space. Are you using chassis ground using pressure from connector for making this connection? Why not just directly connect the green wire to gnd?
What is a microbypass and what does it do? I've tried googling but most resources are showing how to install it/them but none explains to a complete dummy like me what a bypass is or does. Great video though. Wish I understood what this is all about
Question did a bypass on my factory screen watching this kid’s UA-cam it worked but my ebrake is on. So do I cut the wire and leave the radio portion connected to the ground
Thanks for the video, very informative. I have the same unit, do you think if I tape the light green wire to the metal of the unit that it will work? Can I hook up the green wire to the ground? Thanks
Would you mind explaining exactly what this does or why it works. I just ordered a AVH-X4600BT but I won't have that other white plug which you put the green wire though. How else will I be able to bypass the parking brake. Thanks
New reply on "Hello everyone! I have a pioneer Avh-270bt. I cant pair my bluetooth with my iphone. It says memory full. How do i clear the memory? How do i put it in parking brake mode? Which wire is the ground wire? Can anyone help me."
I have a Scosche SU03B harness that has an orange wire and an orange and white wire. My Pioneer AVH-200EX factory harness has ONLY an orange and white wire. Do I need to connect the orange and white wire and leave the orange wire disconnected, or should I forget both of these wires? I know they are for illumination, but I'd like to know how to connect these orange and orange/white wires. Thanks for any help!
On my pionera 420 dab I connected the hand brake wire (green ) to one side of a capless bulb then to earth the other side of bulb I contacted to blue auxiliary wire 😮 worked mimicking handbrake on, 20 pence I used a small bulb tucking it in to dash don't waste £10 on a bypass
I've had 4 pioneer indash model back to the very first and one of the latest. light green wire tied into black for your ground and its done. never will have a problem again
Nice video and i quick question. I installed the bypass and also hooked up the gps antena to the radio, but when I am driving i cant use UA-cam or miracast, a screen shows up on the screen telling me that i cant watch videos while driving. Is that because I hooked up the gps antena to the radio? Thank you.
i have a pioneer avh-x4700bs i tried to do the bypass by just hooking up normally light green eith light green black with black and the blue with the blue it does not unlock my radio if i ground the green do i need to hook up the blue wire ???
hey,i have an old model 2004 to be exact/ it plays the dvd but i cant see anything.just the sound.do you think this is my problem? i will try this and let you know.but plz answer
Can't you just ground the park wire and it will work with the car in motion. I know you're not supposed to watch DVDs while driving but I let the kids watch the head rest screens.
can you do a video for Ouku Double 2 Din In Dash Head Deck 7" LCD Car Stereo Radio DVD Player Mp3 SD USB RDS Auto Slide Down Large LCD Steering Wheel Control
what color is the ground and what color to i put it to for Ouku Double 2 Din In Dash Head Deck 7" LCD Car Stereo Radio DVD Player Mp3 SD USB RDS Auto Slide Down Large LCD Steering Wheel Control
Hey Lessco, do you have an idea how i can bypass this on AVH-X1500DVD? Few people say that the relay works, i tried and it does not. Thank you in advance.
Yeah same thing. I did it with mine. If it doesn’t work for some reason. Hook a toggle switch to it to emulate the parking brake going on and off make it does electronically. You would have to turn the toggle switch on off and then back on again. I’ve had to do that on units as well.
So the green wire attache to the white harness hole.... for what purpose? i dont think theres anything there... should you just have grounded the green wire?
Ali S. Yep! I asked myself the same muh Fkn question...why not just tap the green into the black? Why add the other green and attach it to the white block??
the unit is looking for a brief ground pulse for 1.5 seconds and then be open circuit then see a steady ground. that is what our part provides for you.
Sir.i have pioneer4200nex device.i buy this device from accidental car market.when i switch on this device its show some passowrd.can you help me how to remove this password otion or how to factory reset this device
sorry this didn't work on my avic 150 as soon as you drive it goes back when I stop at a red light I can watch but after I get going it goes away again
+Timothy Olson That unit needs a double pulse style like this one we have: stores.ebay.com/Lessco-Electronics/_i.html?_nkw=1700s+bypass&submit=Search&_sid=77826561
Hi Lessco. Quick question.. i would like to do a bypass on a new avic8000NEX. Can u help me choose the right bypass relay from your site so I can get one ordered asap. Thanks in advance.
What did you end up doing. You don't need anything special. Just installed a avic 500nex. All you do is splice the light green with the ground. Then press and hold the bottom left of the screen for 10-15 seconds and you're done. I will be uploading a video in about a week to show how I did this
just ground the e brake wire no matter what color it is, it will be labeled all that other stuff is unnecessary, it will send a constant signal to the radio while it's turned on, problem solved
I've found that on Pioneers if you just ground the e-brake, after you get up to speed, it will cut the video. This method works on some, but not all, and especially not the units with Navigation
I DO highly recommend you purchase the Lesco bypass module for around $20. I would not recommend putting the parking break wire directly and permenatly to a ground source. As this will cause a ground loop condition that can and will eventually cause damage to the sensitive electronics..
Dokk Tekk no, that model needs this:www.ebay.com/itm/PIONEER-BRAKE-DVD-BYPASS-for-AVH-X2700BS-AVH-X3700BS-AVH-X1700S-AVH-270BT-/141589326263?hash=item20f761a9b7
+Mark Sarucam that model needs this instead: www.ebay.com/itm/PIONEER-BRAKE-DVD-BYPASS-for-AVH-X4800BS-X5800BHS-X1800S-X2800BS-X3800BHS-/401042746425?hash=item5d6002ac39
Just used this Bypass on my AVIC-Z120BT worked like a charm thanks a million Lessco Electronics!!!!
Just did it myself rightnow and it was so simple faster than i can say accomplished...thanks bro
I have a AVH-501EX pioneer and used a toggle switch and grounded it to the side of the radio. DO NOT FORGET YOU HAVE TO TOGGLE TWICE! Just as the E brake twice
Interesting
But why 2 times?
Thanks!!!! My son just watched a movie in the car on the ride home.
Hmmm I don't think the wire through the harness clip was necessary, it's usually being grounded that allows to circumvent the PBS. The wire through the harness clip isn't making contact with anything...or is it?
I understood everything except why did you put the wire into the white connector empty space. Are you using chassis ground using pressure from connector for making this connection? Why not just directly connect the green wire to gnd?
works perfectly on my pioneer AVIC -Z140BH thanks 🙏 👍👍👍
Your pioneer and clarion units are the only ones that need a video bypass relay all,other ones can just tie your brake wire and ground together
Is the green wire passed threw the white to simulate the switching of the ebrake from off to on?
What is a microbypass and what does it do? I've tried googling but most resources are showing how to install it/them but none explains to a complete dummy like me what a bypass is or does. Great video though. Wish I understood what this is all about
Question did a bypass on my factory screen watching this kid’s UA-cam it worked but my ebrake is on. So do I cut the wire and leave the radio portion connected to the ground
what happens if you just ground the green wire but not the other wire on the rca harness?? will this damage my vehicle?
I wonder if this apply to any
Pioneer stereo?
Thanks for the video, very informative. I have the same unit, do you think if I tape the light green wire to the metal of the unit that it will work? Can I hook up the green wire to the ground?
Thanks
Thanks for this video..You are the man sir.
Any radio with Double pin can be bypass with a 12V Relay. This worked with my AVH-3700BHS.
Would you mind explaining exactly what this does or why it works. I just ordered a AVH-X4600BT but I won't have that other white plug which you put the green wire though.
How else will I be able to bypass the parking brake.
Thanks
Without the plug it would be impossible for you to do.
New reply on "Hello everyone! I have a pioneer Avh-270bt. I cant pair my bluetooth with my iphone. It says memory full. How do i clear the memory? How do i put it in parking brake mode? Which wire is the ground wire? Can anyone help me."
Can you show a detailed video for installing the Microbypass to a Pioneer AVH-X5600BHS?
79CrashOverride I already did, search "dvd bypass" in my channel, it's already there
I have a Scosche SU03B harness that has an orange wire and an orange and white wire. My Pioneer AVH-200EX factory harness has ONLY an orange and white wire.
Do I need to connect the orange and white wire and leave the orange wire disconnected, or should I forget both of these wires? I know they are for illumination, but I'd like to know how to connect these orange and orange/white wires. Thanks for any help!
put the green wire on black ground , and your done , much easier . just strip a bit of the black cable and tape or solder the green wire on it
just ground the green wire and add a switch and turn it on and off and bak on so the ok symbol lights up I did it to my pioneer avhx5800
Where do you hook up the switch too? Thanks
Is there a way to bypass the AVH2600bt without buying one of those micro relays from amazon? Thanks for your time....
no, those require a double - pulse type of bypass module.
Thanks for getting back to me, I really appreciate it!
Hello,is the same for AVH-X490BS ?
On my pionera 420 dab I connected the hand brake wire (green ) to one side of a capless bulb then to earth the other side of bulb I contacted to blue auxiliary wire 😮 worked mimicking handbrake on, 20 pence I used a small bulb tucking it in to dash don't waste £10 on a bypass
It's work on avh-120 bt pioneer??
I've had 4 pioneer indash model back to the very first and one of the latest. light green wire tied into black for your ground and its done. never will have a problem again
Nice video and i quick question. I installed the bypass and also hooked up the gps antena to the radio, but when I am driving i cant use UA-cam or miracast, a screen shows up on the screen telling me that i cant watch videos while driving. Is that because I hooked up the gps antena to the radio?
Thank you.
1 year later?
@@domsugar9160so it's 4 years now
So what
@@fil1329 so your hole?😂🤷
@@domsugar9160 that's all u got
Does this technique work in the 8500NEX
Thanks i need this video, for locate the place of green wire pin(car parking brake).
i have a pioneer avh-x4700bs i tried to do the bypass by just hooking up normally light green eith light green black with black and the blue with the blue it does not unlock my radio if i ground the green do i need to hook up the blue wire ???
Hi, where do you hook up the VSS wire?
By the way, great How-to videos. Thanks for sharing!
hey,i have an old model 2004 to be exact/ it plays the dvd but i cant see anything.just the sound.do you think this is my problem? i will try this and let you know.but plz answer
Sounds like it..
Will this work on the avh x5600bhs? Ive heard it will but not sure ive tried the regular relay and it didnt work.
Will this work on AVH-X8500BHS?
6 years later?
I did it thank you a million
glad to help!
I would like to see a picture of the harness for the gathers DVD video player and GPS car stereo this come in the Honda fit 2010
so by flagship dvd receiver this will work on the avh x5600bhs
Can't you just ground the park wire and it will work with the car in motion. I know you're not supposed to watch DVDs while driving but I let the kids watch the head rest screens.
No pioneer fixed that so it doesn't work anymore
Great videos!!! What brand of stripers are those or which would you recomend?
those are the strippers I sell on our site at lesscosales.com
I have Pioneer AVH-X4600bt, everything is stock, don't have an amp. How do I bypass it?
why can you simply ground the parking brake and then utilize the bypass cheat on the off standby screen?
can you do a video for
Ouku Double 2 Din In Dash Head Deck 7" LCD Car Stereo Radio DVD Player Mp3 SD USB RDS Auto Slide Down Large LCD Steering Wheel Control
what color is the ground and what color to i put it to for
Ouku Double 2 Din In Dash Head Deck 7" LCD Car Stereo Radio DVD Player Mp3 SD USB RDS Auto Slide Down Large LCD Steering Wheel Control
Hey Lessco, do you have an idea how i can bypass this on AVH-X1500DVD? Few people say that the relay works, i tried and it does not. Thank you in advance.
you figure it out?
Is it the same case with the avic-z140bh?
Hey I have a eclipse avn52d it ask for the map disc n I don't have it can I bypass it
What does that empty pin go to that u are putting a ground on
it send a signal
Does this bypass work with the new NEX models?
6 years later?
hi there will this work on a Pioneer MVH-AV270BT
Will this technique work with the Pioneer AVH-X7500BT head unit?
did u ever find out if this works for the avh-x7500bt? i have the same one is the mail and want to find out before i install it. thanks
I got a microprocessor chip bypass from eBay and it worked great. Let me look up which one I purchased and I'll put up the link
I got the microbypass from a site called www.microbypass.com/index.php?act=viewProd&productId=1
Cant you just attatch it to the groumd or a ground
Hey great video . Would this work on a AVIC D1 ???
Yeah same thing. I did it with mine. If it doesn’t work for some reason. Hook a toggle switch to it to emulate the parking brake going on and off make it does electronically. You would have to turn the toggle switch on off and then back on again. I’ve had to do that on units as well.
will this work with AVH-2800bs model?
I was told that doesn't work. Because the pioneer radios are looking for like two pulses or some
So the green wire attache to the white harness hole.... for what purpose? i dont think theres anything there... should you just have grounded the green wire?
what i was thinking lol
Ali S. Yep! I asked myself the same muh Fkn question...why not just tap the green into the black? Why add the other green and attach it to the white block??
Jorge Palacio so can you just tie into the mute wire and not the white block
Mine only had one adaptor so I juts connected it to the black wire
would the procedure be the same for the Pioneer AVH-X28OOBS ?
vanessa brito I would buy a rely it's really easy
Will it work On
AVH-A205BT
Will it work for avic z140bh
Hi please show me How to bypass JENSEN DVD CAR8000 Thanks
That one is too new, call audiovox tech at 631 231 7750 for that one
I have the avh-3600bhs. It didn't come with the preamp outputs. Where else can I run this wire?
on a 3600bhs you just double pulse the green wire with a dvd bypass
Lessco Electronics I don't know what that means... which one is the bypass?
this bypass: www.lesscosales.com/servlet/the-36339/ALL-AVH-PIONEER-and/Detail
What needs to happen? Does it need power and then need to be grounded?
the unit is looking for a brief ground pulse for 1.5 seconds and then be open circuit then see a steady ground. that is what our part provides for you.
Sir.i have pioneer4200nex device.i buy this device from accidental car market.when i switch on this device its show some passowrd.can you help me how to remove this password otion or how to factory reset this device
Call 800 pioneer, they need to do those.
is this the same for the pioneer avh x5700 bhs thx
Tanya McKeown no, that one requires the double pulse relay bypass we sell that connects to the green wire on your unit.
how do i hook up my external amps two of them i plug in my rca and i have no sound but my amps are green but no sound
This video may help...
ua-cam.com/video/wgdaomsqhMI/v-deo.html
sorry this didn't work on my avic 150 as soon as you drive it goes back when I stop at a red light I can watch but after I get going it goes away again
Will yhis.do with avic 940bt
Do it work for a XD vision
Will this work on the pioneer avh x1600
bspaintingok no, that 1600dvd needs this: @361071251028
Thank you
2:15 Nothing bareback here :P
Works on avic x940bt
will this work for a boss bv9967b
+Ben Stal no, just pioneer
What about the speed sensor wire
what about it?
how can i do one for mt avh-p3200bt
Does thiz work with a huge-x490bs
No, that one is different.
how can this work for the AVH-4000NEX?
Hey I have a eclipse avn 52d it ask for map disc is there a way to bypass it
Dante Boyce u can't, pioneer 4000nex series not allowed to do this method any more
How can I make one for AVH-1700s?
+Timothy Olson That unit needs a double pulse style like this one we have: stores.ebay.com/Lessco-Electronics/_i.html?_nkw=1700s+bypass&submit=Search&_sid=77826561
Is the no way to make one of these?
m
Hi Lessco. Quick question.. i would like to do a bypass on a new avic8000NEX. Can u help me choose the right bypass relay from your site so I can get one ordered asap. Thanks in advance.
What did you end up doing. You don't need anything special. Just installed a avic 500nex. All you do is splice the light green with the ground. Then press and hold the bottom left of the screen for 10-15 seconds and you're done. I will be uploading a video in about a week to show how I did this
Standard Nameo So is this the same prodedure for a Pioneer AVIC 5000NEX? Thanks
Watch my code on my channel for the way to do it. Will work for you. Yes
just ground the e brake wire no matter what color it is, it will be labeled all that other stuff is unnecessary, it will send a constant signal to the radio while it's turned on, problem solved
William Faulknor that's all I've ever done, works on every unit I've had.
I've found that on Pioneers if you just ground the e-brake, after you get up to speed, it will cut the video. This method works on some, but not all, and especially not the units with Navigation
just grounding doesnt work on Pioneer
You grounded it when you put it through the harness and plugged it in. Attaching the ground was redundant.
What if i did the bypass but the picture turns off every time the vehicle starts to move?
my problem exactly
This don't work with new pioneer models.
wait,what ? looks complicated
TYTO METRA..
But u don't show it work? Hummm?🤦👎
All u have to do is ground it.why go to all that work
It's a nearly 4 minute video.. that's not "quick."
Did you have bypass for avic z2
Will this work for the older model pioneer avh-p4200dvd model?
Anthony West you need this
@361229035115
Where can I get that at ?
Will it work on avh-280bt
Can it be done my 12 V relay
hi, is this the same for a F9310BT?
I DO highly recommend you purchase the Lesco bypass module for around $20. I would not recommend putting the parking break wire directly and permenatly to a ground source. As this will cause a ground loop condition that can and will eventually cause damage to the sensitive electronics..
Would this work with agh 3700bhs.
Kishan Patel No sir, what you need is this: @361229035115
will it work on a 170dvd???
Will this work with the AVH-X2700BS?
Dokk Tekk no, that model needs this:www.ebay.com/itm/PIONEER-BRAKE-DVD-BYPASS-for-AVH-X2700BS-AVH-X3700BS-AVH-X1700S-AVH-270BT-/141589326263?hash=item20f761a9b7
is this work for avh x5700bhs too.?
+Mark Sarucam that model needs this instead: www.ebay.com/itm/PIONEER-BRAKE-DVD-BYPASS-for-AVH-X4800BS-X5800BHS-X1800S-X2800BS-X3800BHS-/401042746425?hash=item5d6002ac39
How do i find the wiring diagram for plugs at back of a pioneerpvh4638zt dvd unit