I have used a bore snake for some time, and absolutely love it. So I thought I would share my experience in using one with my viewers in case you may want to try one.
You are indeed a connoisseur of rimfire usage and maintenance . Have used boresnakes for as long as I can remember . I do agree that snakes do a fine job of keeping bores clean . Be sure to watch the brushes , as they can scratch a wood or finely blued surface on the outside of the receiver . Good luck on your deer hunt . Ohio Gun Season was rough . Cold , extremely windy , and I saw few deer . Finally "settled" on a spike for the freezer . It was fat and full of soybeans . Should be tender and tasty . Will go back out for muzzleloader .
Thanks so Much for your Down To Earth Advice and Wisdom, I love old guns too, ALL of them, I haven't near enough but the ones I have are made more special with your advice and info!!
I have older type Bore Snakes and keep them in plastic baggies in my range box. I clean centerfire rifles after every 5 shots and rimfires every couple hundred. They all function flawlessly and shoot very accurately. I give things a thorough cleaning when I get home. The Bore Snakes are easily cleaned by laying them on a board and spraying with Gun Scrubber or brake cleaner and wipe off with a paper towel. Ive had mine for years and they still work just fine.
I have been using the Bore Snake system for several years now. I have one for every caliber and gauge. I was recently gifted a Model 63 Winchester with lots of surface rust. The bore after several pulls of the bore snake it looks new.
Do think I'm going to pick one of these up next time I wander through the cleaning supplies isle. The segmented rods with the threaded bits and pieces and patches, they work, but it just seems a lot more messy and complicated than it has to be.
I have heard that the Bore Snake provides 60 times the contact in the bore as opposed to patches. I’ve used them for years. They really do get the job done where you can’t clean with a rod from the breech end.
Good Sunday evening. Ive been looking for a good older bolt or pump action 22lr. Hard to find a decent one . Remember everyone Jesus Christ is the answer ✝️🙏
I dont used them exclusive. I still rely upon a conventional rod brush and jag. But I also have snakes for most every caliber. A snake always resides in my 22 target pistol box! Good video! ❤
A good cleaning rod is still the best tool for cleaning the bore but usually it's difficult to use on semi-auto guns and some others. A Bore Snake is quite a handy tool to have to help keep a rifle bore clean.
Good video bore snake is much better good idea with the rubber band as i have 1967 model 60 no lockback. Maybe a small bungee cord would do as well if rubber band breaks it could be very painful.O shizzit lol.
Thanks for all your informative videos… I’ve learned a great deal. I’ve been using bore snakes of different brands for many years. What’s the best way to wash them. Or are they considered expendable after many uses? Because eventually the brushes in them ware out. I’ve never washed them I use them for a few years 100 times let’s say and get a new one. Any thoughts about cleaning a bore snake? Thanks in advance
Thanks for showing the rubber band trick. How long will bore snack last knowing patches need changed with cleaning rod. I have a Remington pull thru Squeeg-E Universal Gun Cleaning System . Works similarly wonder if you have tried one or had a opinion on. Thanks great video keep them coming.
I can't wait to see the 581 restored. That 69a looks great.
Thanks. I will start on that as soon as I can.
Thanks for sharing this. I’m actually using the bore snake system.And it’s a delight to use versus the older way of long rod. 👍
The "Old Rubber Band Trick" is my "New Rubber Band Trick". Thanks from an old dog. ☆
You are indeed a connoisseur of rimfire usage and maintenance . Have used boresnakes for as long as I can remember . I do agree that snakes do a fine job of keeping bores clean . Be sure to watch the brushes , as they can scratch a wood or finely blued surface on the outside of the receiver . Good luck on your deer hunt . Ohio Gun Season was rough . Cold , extremely windy , and I saw few deer . Finally "settled" on a spike for the freezer . It was fat and full of soybeans . Should be tender and tasty . Will go back out for muzzleloader .
Thanks so Much for your Down To Earth Advice and Wisdom, I love old guns too, ALL of them, I haven't near enough but the ones I have are made more special with your advice and info!!
I have older type Bore Snakes and keep them in plastic baggies in my range box. I clean centerfire rifles after every 5 shots and rimfires every couple hundred. They all function flawlessly and shoot very accurately. I give things a thorough cleaning when I get home. The Bore Snakes are easily cleaned by laying them on a board and spraying with Gun Scrubber or brake cleaner and wipe off with a paper towel. Ive had mine for years and they still work just fine.
I have been using the Bore Snake system for several years now. I have one for every caliber and gauge. I was recently gifted a Model 63 Winchester with lots of surface rust. The bore after several pulls of the bore snake it looks new.
Do think I'm going to pick one of these up next time I wander through the cleaning supplies isle. The segmented rods with the threaded bits and pieces and patches, they work, but it just seems a lot more messy and complicated than it has to be.
You'll probably be like me and hardly ever use a cleaning rod very much again.
I used a bore snake right after I saw your video, I won't go back to the rod anymore. Thanks, great video!!
I have heard that the Bore Snake provides 60 times the contact in the bore as opposed to patches. I’ve used them for years. They really do get the job done where you can’t clean with a rod from the breech end.
Hope you came through the tornado's safely
Thanks, we did. It went right over our community before it touched down.
Good Sunday evening. Ive been looking for a good older bolt or pump action 22lr. Hard to find a decent one . Remember everyone Jesus Christ is the answer ✝️🙏
Great video as usual! Thank you sir! 🐿
I dont used them exclusive. I still rely upon a conventional rod brush and jag. But I also have snakes for most every caliber.
A snake always resides in my 22 target pistol box!
Good video! ❤
Thanks.
A good cleaning rod is still the best tool for cleaning the bore but usually it's difficult to use on semi-auto guns and some others. A Bore Snake is quite a handy tool to have to help keep a rifle bore clean.
I can't wait to see the newly refinished stock on your new old 581 Remington.
Thanks for sharing your knowledge and keep your videos coming please.
Hi nice video how do you clean the boar snake? I use the patch worm method on a heavy nylon cord and I pull cotton patches coated with balistol.
Thanks for sharing your wisdom. You answered many of my questions. That time of the yeat. Merry Christmas!
Thank you for the advice.
Great video 👍
سلام من از ایران هستم و عاشق ویدیوهای شما،،،و تفنگ کالیبر22❤🎉
Good video bore snake is much better good idea with the rubber band as i have 1967 model 60 no lockback. Maybe a small bungee cord would do as well if rubber band breaks it could be very painful.O shizzit lol.
Thanks for all your informative videos… I’ve learned a great deal.
I’ve been using bore snakes of different brands for many years.
What’s the best way to wash them. Or are they considered expendable after many uses? Because eventually the brushes in them ware out. I’ve never washed them I use them for a few years 100 times let’s say and get a new one. Any thoughts about cleaning a bore snake? Thanks in advance
Thank you for video
Thanks for showing the rubber band trick. How long will bore snack last knowing patches need changed with cleaning rod. I have a Remington pull thru Squeeg-E Universal Gun Cleaning System . Works similarly wonder if you have tried one or had a opinion on. Thanks great video keep them coming.
Bore snakes are the greatest thing since the invention of smokeless powder
thanks ken in mt MERRY XMAS
Nice video we also have 582 model sir please confirm first focal plane or second focal plane which scope is best for rimfire
I saw there were the youtube "gundie" awards and there was an oidoosrman category to vote for. You werent an option. So i didnt vote.
You should've voted for the legend himself, Paul Harrell.
Tom let me know asap if you are OK please.😅😢
You can clean them when needed by putting them in an old sock then thru the clothes washer. Just don't mention it to your wife. :-] Just kidding.