Are You Using Your Rifle Case Wrong?
Вставка
- Опубліковано 4 вер 2024
- I just wanted to share some tips on how we can better situate our rifles in our weapons cases for transport to decrease the odds of your scopes and optics getting damaged. Here Rich Graham (Navy SEAL Sniper) discusses some some simple tricks he does to safe guard the equipment in its weapons case.
Great point Rich, I also orient my rifle so that the stock is to the wheels for when rolling the case. This gives the foam more surface area to sustain the weight of the rifle when on it’s end.
Great point!
Good info. I've spent my life around rifles and often see vids like yours saying, "you've been doing it wrong" and I think, hey, I'm as willing to learn new things as the next guy, but don't waste my time. Often it's a waste of time, but not here.
I learned something today, so thanks for that.
Was anyone else just looking at his collection and not hear a thing? Lol. Awesome collection dude! Thanks for sharing. This helps.
Love how thorough this guy is
Thank God .... someone else realizes the proper way to place a rifle in a gun case. THANK YOU, SON!
I purchased an extra foam inset and cut out to match my rig- zero shifting and moving. Thanks for the tip for the scope up!!
Amazon run out of foam inserts after this video 😜
Super helpful info !
Ruger PRC (300 Win Mag) weights 15 lbs + scope, + bipod, + magazines. It’s enough to have a designated case just for that one rifle ❗️
The same goes for soft or hunting cases. Scope up towards the handle. Great advice.
yes! even more important in the soft cases
Thank you. Good video. Especially with your learning experiences included. After my introduction to shooting with the SLR L1A1, I joined a smallbore club and was taught quite a bit by the guy who founded it, a Bren gunner from 2NZEF. One of the things I learned was never to store a heavy barrelled rifle on its side because gravity would wreck the bedding. I bought a small Pelican case and cut it out to take the receiver sight and bolt for my Anschuetz target rifle. That case stayed in the wooden rifle case. I am currently building a top opening case for a centrefire rifle. Typical carpenter, too many projects on the go.
The quiet guy in the corner who doesn't like to attract attention but knows his stuff.Brief thorough info vs.tons of useless shit. Keep it this way Rich, never go mainstream.
thank you!
Time to flip my cut out 180° Thanks for the pro tip..
Great video. I see a lot of people making this same mistake.
One thing I would add though. If I was traveling frequently with a scoped rifle, I would remove the scope and pack it in it's own padded hard case. When dropped it will be under it's own weight (plus case weight) and not the entire rifle. Can't be too overprotective of a scope that costs upwards of $1000.
Then you risk losing zero? No thanks...
@@StefanSu91 Not if you run a good mount. I can qd my scopes and put them back on and holds the exact 0 as before.
@@StefanSu91 that's why you can't cheap out on the mount. A quality mount will retain zero after detaching it
To be "over"protective is not necessary. And to be "too" overprotective is just insane.
I don’t think I want to spend another $100 for an extra luggage.
Plus that’s another box we need to worry about.
I rather buy a bigger case and put everything together, with plenty of space around it.
Wow. I am just happy to have run into this how-to video made by a Navy SEAL Sniper. I will definitely heed your advice sir, even though I only transport my rifle to the local gun range to shoot at targets. I have no military experience whatsoever, so videos like this from pros like you are much appreciated.
That is very solid advice. I would have never thought of that. That might explain a couple of times when my zero was off. Pretty cool video rich!
no problem! hope it helps
Great video, great points, Liked and Subscribed! And the 18 "thumbs-down" are from those who already hot-glued their foam inserts in upside down!
One question. Why not the stock on the side of the wheels? If you walking and use the trolly the heavy part is up and not resting on the Buttstock. Rest is good info
The rifle is going to be balanced, there really isn’t a heavier end. The balance point will be slightly ahead of the mag well, which is right where his handle is.
HA! By the time I added a scope, my OEM case is too small. While shopping online, I kept wondering why others had their scope on the bottom and not the top by the handle. I felt it was wrong to do it that way. While searching reviews on cases, I stumbled upon your vid. Now, I know pretty much for a fact they have theirs upside down. THANK YOU.
My only comment to this is that I like to have the heavier part of My Rifle nearer to the Wheels.
Thank you for this video. I've wondered about this when I've seen it. I don't even carry my shotguns barrel side down in their cases, much less scoped rifles. Maybe it would help some if vendors didn't sell cases on their websites with a picture of the rifle in the case in the "scope down" position.
All that time getting a degree in engineering and I never thought of this 😂 GREAT INFO, thanks for sharing!
Excellent points! Thank you!!!
Glad it was helpful!
💯 percent! This is the (only) way to do it
Damn I have mine set up all wrong, good thing I came across this vid.
Thank you for your wisdom.
So glad I watched this before starting cutting.
Im just admiring your guns.
Good thinking on not loading your rifle upsidedown. One thing I like to do when I don't have cut out foam is to put the rifle in a soft bag then load that in the pelican case.
It would also completely eliminate the point of this video if you just ordered a case with pick n pluck foam, or just ordered a sheet of pick in pluck foam to put in your rifle case.
Just changed my cases around! Thanks man.
Great to hear!
I would take the Steiner on board with me, it's the value of the rifle. Bore sighting an ar frame by looking down the bore is easy, and gets me to 1 MOA.
Awesome! Thank you so much for the advice. You ROCK!
So funny I came across this video as I was looking for a new hard case for my competition rifles and thought the EXACT same thing...Why are people loading their rifles upside down in the case and letting that scope bang on the bottom! Nice vid...Sub'd.
never thought about it , it make sense
You are a genius 🙄
BRAVO,BRAVO!!!!
I’ve worked at at couple local gun stores and folks always have the rifle in the case with the scope at,what becomes the bottom of the case!
And always ask them why. They be never think of it this way. Man, you’re resting your rifle on the scope turret!!! What could go wrong!
Very good on the vid, hope plenty see it
Great video man! I love the🎵Aaaaaaaa🎵
hahaha!!!
What "old school shooting glove" is that? I like it
Just get stiffer foam. I cut military sleeping pads and fit them to the case. My scope doesn't even touch the foam and it is facing the bottom side.
also..put stock end of gun over the wheels -- heavy end let wheels do the work.
You could also just use pick and pluck foam and then this wouldn't be an issue, or you could get some foam cut to fit your gun, and that would also make this a non-issue.
You mean like he shows in the video?
Thanks Rich! Love the “guitar” case as well! Haha
Using a Guitar Case to carry a Firearm can be viewed in some Jurisdictions as Concealment and can get you into a degree of trouble.
Go figure. Sometimes the obvious escape us. Thank you. Question, how many inches, upper and lower, of foam do you have in the case with the cutouts.
Excellent video.
..SIXTY YEARS BEEN DOING THIS ...BEFORE THESE KIDDIES WERE EVER BORN! ..JUST COMMON SENSE...
Can't teach folks common sense tho. They have seen it this way for YEARS in movies and on tv
Makes sense however I refuse to fly, I always drive. Too much bs at the airports and luggage gets lost or damaged.
Anyway you can make a video of your 511 cams bag Showing how you use it and what you like and don’t like about the bag ? I’m debating if I should buy one myself I want know your opinion
yah we can do that
Is the best way to store a .338 Lapua standing up, hanging up, or in gun case?
I mean cut the foam so its sitting inside the case instead of on it. That has a huge factor in protection and keeping your zero more then the way its positioned
You mean like he shows in the video?
nice collection.
great video thanks. btw is that a guitar? 👀
Great to hear you like the video, and that is a low vis gun case that looks like a guitar case I use for travel in un friendly firearms locations. Savior equipment makes it.
Another unnecessary but useful tip is to spray both sides and the interior of the cut foam with PlastiDip. Adds durability and reduces foam debris, as well as a moisture barrier
Problem is flipped, you can't check the action/chamber without pulling the firearm out, which means some minimum wage TSA guy is going to handle your gun.
Use foam that fits key points like your forearm, handle and stock _very_ snug.. have room around the barrel and scope. include cut-outs for the mags. Done
Hey man heard ya name drop deep south tactical. How are you liking the rifle. Just had them rebarrel a rifle for me in 6.5 CM as well. It shoots phenomenally well.
I have always been told to keep the stock pointed towards the wheels. That way the barrel is at the top when you are using the wheels. Do you think it matters? You would still be able to have the scope on the handle side.
great video
So am I crazy or is this problem solved instantly with better quality foam cut to the shape of the firearm????
I have several that have expensive custom camo jobs, and they get scuffed amd scratched. I dont abuse them but i use them. They are tools, not fabrege eggs.
Why not get a case with cutouts?
Is this the v770 model ?
TLDW: Put your gun in the case, with the scope towards the handle.
Makes sense
why not detach the scope from the rifle and put it on your hand carry?
Um.....because with the scope is already mounted, the optic is in harmony with the firearm and the shooter. Nobody wants to mount/dismount their optic all the time and probably re-zero.....
How about cutting the dam foam and the gun will never move!
custom cut out the foam -- 99% problems solved
Respectfully, most of this information is inaccurate. It makes no difference how you orient the rifle in the case. If you have no custom insert, You can't count on TSA holding the case upright all the time. The case will be thrown around and will end up upside down at some point. Also if you have a custom foam insert, it shouldn't make a difference if the case is upside down or right side up. The foam spreads out the kinetic energy when hit around the rifle. If all the energy went into the scope then you have a poor insert as the foam should be contoured around all parts of the rifle evenly.
I'm the Lead packaging engineer at caseclub.com
Good marketing strategy lol optics up grips down always
Just buy a case from these guys and have them "Custom Cut" the foam for ya at a good $$$$ sign 👍
Or you could get better foam.
It doesn't cost all that much
This is common sense or at least I thought it was.
Or you can just cut out your foam
This a video we needed? It comes with foam to cut so just don’t be lazy and cut it lol you spend 5-10k on a rifle and you can spend another 200 on a case??
🇺🇸🇺🇸🇺🇸🇺🇸👍🏾👍🏾👍🏾
Cut your foam like it supposed to be so it doesn’t move at all. Problem solved
Common sense 101
No shit Sherlock
Nice room
Cheap husky tool box lol
Actually it's a very well built box. I use one daily at work loaded down with tools for remodeling apartments.