2:22 , taking the springs out...... 3:25 , taking the magnets out...... 4:45 , making the cube heavier by putting magnets (not to magnetize) 6:37 , again putting magnets except white side and also lubing the core with Lubicle Black...... 7:54 , lubing the peices with DNM-37 and Max Fleet...... And then does a U-12......
QnA from comments Q: Can I use this in a comp? A: Doesnt comply with WCA Regulations. Regarding to the question above, it wont comply, it can _possibly_ get you kicked.
@@chilledwavez your allowed to have magnets, and tension the screws, the dimes i think break a regulation. and the fact he removed springs entirely is illegal.
@@ANBAT Well you see I used a small motor I had lying around, and I completely gutted the cube and put the motor in, and attached it to the top layer, flicked the switch and boom. by the way I used an old Qiyi Warrior. It's still spinning now!
I believe the reason the Cube was spinning faster when they were magnets was because the amount of energy he's finger had to put in to breaking the magnets was so high when there's no Force pushing against his finger he can't put that much energy into the Cube.
What if you put the magnets in the cube such that the magnets of the pieces of the top layer repel the pieces of the middle layer? The pieces of the top layer stay together but repel the middle layer. I wonder if that's possible
If you reverse the magnets the parts (if the magnets is strong enough) will be frictionless. It should help with friction so you can make it even faster ;)
How to solve a Cube 1 Get a Painbrush and aruler 2 Paint The cube with blue red Green Yellow and White And Make no mistake and put the side with the ruler 3After its painted Boom done Its solves
the magnets made the rest of the layers stable and aligned which makes the cube have less friction, also use the gts 3 since it is already super fast and i get like u3s while turning normally without trying to flick the cube really hard. Also you should have you finger in between the top and middle layer, and start pressing really hard, and slowly more your finger up till its in only the first layer, i got a u4 on a stocked lubed gts2 and like a u6 on a stock lubed gts3
Heyy z3cubing this is just to inform that a channel named @decoding cube has challenged you to make the fastest pyraminx he has made a pyraminx that turns 13 times in 1 push
The reason why the magnets in the cube made it turn faster is because the magnets helped the cube align better so there won't be other pieces interfering with the turn
I made a faster cube I took Mr. m removed the springs and did the same thing I losed the screw and added Greece,oil also ball bearings which could do u18 Edit it's makes the cube faster not make it do more turns
I think if you did this again but with a gan 12 pro, it would be insane. The corner to core magnets the "auto turn" it would help accelerate the cube in the last turn
Lol, I'm trying to learn F2L and I see a new vid pop up and I realized eyyyyy that's the same cube I'm using right now. My GAN XS comes in tomorrow and I can't wait. I got the beginner's method down and now I'm moving on to F2L.
Put JB weld putty in pieces and see if some how u can use Ball Bearing to make it spin.,I'm not a cuber at all just love to watch u guys create awesome puzzle with them.
Imagine if you made a cube called something like, ‘INFINITE SPIN CUBE’ where you just put a motor inside it and made it activate when you spin the top layer
Magnets don't slow the cube down, the accelerate the face as it's coming close to a complete turn just as much as they slow it down on the way out of a complete turn.
what you could do is next time first take the springs out of a not magnetic cube then make it so on one side the magnets are repelling each other so while its turning when its about to stop the repelling magnets will make it spin for longer
The magnets might be pulling the side from turning when it moves out of the corner, but it pulls it faster when it moves into the corner. This is a wash
science fact the reason the magnets are faster than without is because of as you said the extra stability along with the extra push after the magnets leave their still state
The resistance from magnets is not like friction. Friction turns kinetic energy to heat, so the energy is wasted. Magnets turn kinetic energy into potential energy. That potential energy can then be reused as kinetic energy. That's why they didn't slow down the cube as much.
![I DID IT. [Rubik's Cube Competition 2021]](/img/n.gif)
I promise I'm not trying to make all these videos 9:59, it just kinda keeps happening...
Dont lie YOU JUST WANT TO BUILD UP TRUST SO YOU CAN SCAM US (lol)
I never even realized that lol
Z3Cubing nah...
Are your logos in your merch store 3x3 size?
*very impressive*
I dare you to use that cube in a comp
U12 cube challenge
@@nickd7225 lol
Oh thanks i thought that you and all the other viewers won't like it😉
AlexD- Racer na it’s a good idea
AlexD- Racer ya
*Meanwhile in an alternate universe...*
Z3Cubing is making the slowest cube possible by pouring glue and maple syrup in it...
And starting with a rubies brand
Just get a solid block and put 3x3 stickers on it
@@wakkle you are big brain
@@akgamer1825 no u
Alex Marat dollar store brand
2:22 , taking the springs out......
3:25 , taking the magnets out......
4:45 , making the cube heavier by putting magnets (not to magnetize)
6:37 , again putting magnets except white side and also lubing the core with Lubicle Black......
7:54 , lubing the peices with DNM-37 and Max Fleet......
And then does a U-12......
thx
Are u kidding me? U spoiled it
@@RedOak06 y u looking at comments while watching vid
@@RedOak06 you looked at the comments before you even finished the video? what is wrong with you
😊
You should essentially make each side a fidget spinner by using ball bearings
*yuxin huanglong throwbacks*
Not gonna lie that seems like a lit idea that i want to have.
You stole my profile picture
yes i was thinking of that
exactly my thinking
Put the magnets repelling each other so that it will just keep going
*illuminati noises
I don't think that will work because it also repels it in the other direction. I would like to see what it does.
@@wrog7616 stuck at half a turn
MeadowsGang Illuminati
Wrog U1
Me: *does U429*
My sleep paralysis demon: *impossible*
SupremeDucksHD I like this comment a lot 👌
CookieCubing123 thank you!
You were nine away from greatness.
roav liller it’s a joke:/
you:U9999909099999999999999989797 1234567890t
This is exactly what you don’t bring to a nervous competition 😂
Ye tru
Bank worker: You need an extra 3 dimes to make an equal deposit.
Z3Cubing: Okay lemme break out my wallet.
*pulls out a 3x3*
Lol y doesn't this get more likes its so funny
bready Brett twoset fan i just saw you from another video askng someone why theyre comment isnt underated, good to see you hear
tf i mean here*
@@swiftified4662 ayyyy ,ingling wannabes everywhere
Tf l meant lingling*
QnA from comments
Q: Can I use this in a comp?
A: Doesnt comply with WCA Regulations.
Regarding to the question above, it wont comply, it can _possibly_ get you kicked.
Wind Productions why not?
Magnets have to be everywhere I think technoblade
Why? I think that the user can set it up like they want. I think that even the cube with the dimes in it is comp legal
Magnets must be in the whole cube not just one part.
@@chilledwavez your allowed to have magnets, and tension the screws, the dimes i think break a regulation. and the fact he removed springs entirely is illegal.
If you hold the up face and flick the bottom two layers, you can get a lot more spinning by measuring Dw instead of U.
Yeah we don't talk about that one...
Wowzers. Imagine using that in an actual solve.😂
WCA Comp? Sorry but doesnt comply with regulations.
@Cuber 7535 Just as a solve. I wouldn't be able to get sub-1 minute!😂
I see u everywhere!
Wind Productions just say it doesn’t follow the rules. Using big words make you look stupid
@@shamuboi3261 Me?
Someone should invent a 3x3 with a motor so it can do U 100+
I think i can MAYBE do it
I have a litte motor laying around and a warrior w
here I uploaded this to my other channel but here ua-cam.com/video/dQw4w9WgXcQ/v-deo.html
B7Cuber that is incredible how did you do that
@@ANBAT Well you see I used a small motor I had lying around, and I completely gutted the cube and put the motor in, and attached it to the top layer, flicked the switch and boom. by the way I used an old Qiyi Warrior. It's still spinning now!
When you accidentaly put the sensitivity to 1000% in a game:
*s e n s i b i l i t y*
I believe its sensitivity but k-
"sensibility" lol
Ron Sexton no
Where Am I but it is
If you invert the magnets in the corners and edges it might reduce friccion more than if it doesnt have magnets at all
Me after watching the U7 move: pls have mercy
Z3CUBING: there is no mercy
U12 move
Uno reverse card
*music intensifies*
69 likes so not liking
Star Wars clone wars reference?
*I am speed*
someone have this man put ball bearings on the ends of the core and basically just make a solveable fidget spinner
I believe the reason the Cube was spinning faster when they were magnets was because the amount of energy he's finger had to put in to breaking the magnets was so high when there's no Force pushing against his finger he can't put that much energy into the Cube.
What if you put the magnets in the cube such that the magnets of the pieces of the top layer repel the pieces of the middle layer?
The pieces of the top layer stay together but repel the middle layer.
I wonder if that's possible
It would just make the cube stuck at 45 degrees
@@alexeecs With that logic, the normal placement of magnets would make the cube unable to turn.
@@hairtoss7975 I mean it wouldn't literally be stuck but it would be hard to keep aligned
This isn't even Z3's final cube form.
When new vid m3ko?
@@OP-pe4yc Good question
Hi!
@@OP-pe4yc hopefully by tomorrow 🙏
@@marshi7777 ayyyy what's poppin'?
Next video: *Making my cube a fidget spinner*
Hehe
I always wait for the moment in the outro where he just throws cubes at whatever he was doing.
Amazing video! Im watching many of channels like yours and i think your UA-cam channel is the best!
Keep making carrier
If you reverse the magnets the parts (if the magnets is strong enough) will be frictionless. It should help with friction so you can make it even faster ;)
At this point it’s just a fidget spinner
Rubik spinner 💀☠️☠️
3x3 mod with ball bearings inside
he has a bonus channel called Z2cubing and this cube is features in a video from that. in the video, he managed to get a D52'!
For anyone reading this comment, the video title is “Oops.”
Imagine just taking the cube apart at a comp.
How to solve a Cube
1 Get a Painbrush and aruler
2 Paint The cube with blue red Green Yellow and White And Make no mistake and put the side with the ruler
3After its painted Boom done Its solves
Take out edge magnets and put them back in with opposite polarity. If magnet atraction slows it down, then magnet repulsion should speed it up :D
Alej Random 2000 iq
Ah yes, _piece MagLev_
Z3: makes tbe fastest cube
Gallon of Lube: hold my lid
Amazing, but you can add same polarity magnets in the side you want to turn to reduce the friction even more
levicube
the magnets made the rest of the layers stable and aligned which makes the cube have less friction, also use the gts 3 since it is already super fast and i get like u3s while turning normally without trying to flick the cube really hard. Also you should have you finger in between the top and middle layer, and start pressing really hard, and slowly more your finger up till its in only the first layer, i got a u4 on a stocked lubed gts2 and like a u6 on a stock lubed gts3
Turn over the cube and see how many D turns you get. Because the pieces are weighed down slowing them
I got inspired by you now i got my own cubing Channel! 😀 Thank you for inspring me
Nobody: ...
Z3 Cubing: Lets make a cube that can do u12!!!
Boom!! Break the WR now😂😎
Your channel is so great! You spend so much time during these videos and is makes a great result!
you are amazing dude😃
Heyy z3cubing this is just to inform that a channel named @decoding cube has challenged you to make the fastest pyraminx he has made a pyraminx that turns 13 times in 1 push
The reason why the magnets in the cube made it turn faster is because the magnets helped the cube align better so there won't be other pieces interfering with the turn
This was really entertaining and you spent a lot of time on this thank you 😃
OMG this is so cool i have to try this out!!!
Next videos : Even faster cube U15
U10000000
Saturniun YT Tech U10000001
Z3: 10- "its 10 guys"
Also Z3: 10+ "look, its 10+"
You should’ve reversed the polarity of the magnets see if that would’ve worked.
0:12 NEED THAT ALGORITHM
its jperm breh
Its j perm it goes R U R' F' R U R' U' R' F R2 U' R' U'
I made a faster cube I took Mr. m removed the springs and did the same thing I losed the screw and added Greece,oil also ball bearings which could do u18
Edit it's makes the cube faster not make it do more turns
I will help u to 100k
let’s put Greece in this cube to make it faster!
That's awesome!
Next make the most quiet cube possible, and the loudest cube possible!
Z3 after puttning in the Max lube: Lets see how this TURNS out.
Get it
Yes but its not funny
hellopablitonoob gaming don’t be mean and yeah get it
Replace the center pieces with ball bearings. That would be insane
What if you could have turned the magnets around so they repel and keep turning
Unless that’s not how physics work
SATISFYING TURNING
For those of you seeing the U12 here it is 9:20
Thank me later
I think if you did this again but with a gan 12 pro, it would be insane. The corner to core magnets the "auto turn" it would help accelerate the cube in the last turn
"woahh u6, that's epic"
respect him. he made his video 9:59 instead of 10 minutes.
3...2...1...LET IT RIP!
Ik im suggesting this very late- but if u can/want I dare u to make a rubix brand into a fast and magnetic cube ig possible
Lol, I'm trying to learn F2L and I see a new vid pop up and I realized eyyyyy that's the same cube I'm using right now. My GAN XS comes in tomorrow and I can't wait. I got the beginner's method down and now I'm moving on to F2L.
The GAN really isn't necessary if you're still learning, I have a $10 magnetic YuXin Kylin V2 and it serves me well, my PB is 15.65
Wow you use Gan xs while you're leaening f2l !
Well I'm using thunderclap v3m ... My average is around 28 secs
Happy cubing :)
Keep up the good work I'm sure you can solve it in seconds since I'm a kid that's 10 and can do 47 seconds at least or under a minute
Thats almost the same for me but i have the GAN356R
My gan X serves me well, and my PB is 9.65
Magnets help apply more force, which is why magnets somehow help with speed
Next challenge: Use that in a comp!!
Copied
Unable to comply with WCA regulations.
@@windproductions343 but you are ruining the joke
@@eepy-eli I think he was being sarcastic
Put JB weld putty in pieces and see if some how u can use Ball Bearing to make it spin.,I'm not a cuber at all just love to watch u guys create awesome puzzle with them.
0:43 when u are so rich u litterly stuff your cube with money
literally
Not litterly
@@somebony alright.
Man took apart a cube THREE TIMES for a video this guy needs more subs
i edited my comment so the replies wont make sense
Edit: plz stop giving hate comments plz
Haha... might me possible.
Like a fidget spinner but better
It’s legit gonna fly away into space lol
He uses lube and screws and stuff and springs
Me: just makes motorized cube that turns FOREVER
Man alex is just crazy good
Now try to get it to do as many M slice moves as possible instead of U moves!
I saw the thumbnail and was like “no that is well click bait” I feel SOOOOO stupid now 😂 great video btw z3
4:04 It's the momentum of those magnets
Man don't tell me the video's 9:59 minutes long 😂
Cmon Z3 you gotta put some efforts in 😂
5:05 cube solve hero: are you challenging me
the reason the magnets made it faster is that it is given more momentum each time magnets pull to each other
Dude, I just realized I have to cube that you used for this video!
10:00 again
No it’s 9:59
Imagine if you made a cube called something like, ‘INFINITE SPIN CUBE’ where you just put a motor inside it and made it activate when you spin the top layer
I litterally watch the other one 10 minutes ago I-
Our avatars look almost the same
Ooh yea
Please post a new unboxing. Your videos are awesome!
BRUH U COULD OF MADE MONEY!!!! U WERE ONE SECOND OFF THE 10 MINUTE MARK smh
lol
That was probably intended
Just to annoy people ;-;
Can we get this man to a million subs?
Cus honestly he deserves it 😌
agreed
This dude is flexing the amount of money he has in each cube piece
Wait, so you invented the maglev rotation mechanism?
idk how you would implement it but what about using ball bearings?
you should put a ton of magnets in one corner so when you flick it pulls the rest of the layer with it’s weight
You can put the magnet with the same pole, that way the force is opposite and creates a levitation effect, further reducing friction
Try do use bearings in center pieces, put weights in the corners and maybe try to elevate the layers with magnets
I wanna say i love this rubiks cube since i love it
Magnets don't slow the cube down, the accelerate the face as it's coming close to a complete turn just as much as they slow it down on the way out of a complete turn.
I think people already said this, but put in ball bearings on each side to make it a six-sided fidget spinner
after a certain point the magnets will push instead of pull therefore the magnets worked better
what you could do is next time first take the springs out of a not magnetic cube then make it so on one side the magnets are repelling each other so while its turning when its about to stop the repelling magnets will make it spin for longer
You need reverse magnets in the core instead of springs to reduce friction and then light magnets in the corners for stability
the first guy to came up with MagLev...
The magnets might be pulling the side from turning when it moves out of the corner, but it pulls it faster when it moves into the corner.
This is a wash
Bring this to a comp the judges will love you
science fact the reason the magnets are faster than without is because of as you said the extra stability along with the extra push after the magnets leave their still state
Great video mate!
Whoa *what?* a *U12* ? I gotta rewatch that!
The resistance from magnets is not like friction. Friction turns kinetic energy to heat, so the energy is wasted. Magnets turn kinetic energy into potential energy. That potential energy can then be reused as kinetic energy. That's why they didn't slow down the cube as much.
amazing vid z3cubing i luv ur channel im from philippines
Same
Great video good tips!
Him: “I think I’m gonna make a whole video of my flicking one side.”
His finger: 👁 👄 👁
Alex: Try making a faster cube because I don’t believe you
Me: Well not with that attitude I can’t