Hey you should’ve used those tiny ball magnets as the bearings so that it breaks 24/7 and turns on its own. Another way is to get the cube wet then dump it in sand then take it out again.
The first and only rubix cube I got when I was like 8 or something broke apart in my hands onto the street as I was turning it literally a minute after I had bought it. That marked the end of my sad cubing experience barely after it had even started.
When I visited my grandfather he had a cube from like 1975 which was arguably worse than what you just made, it was almost impossible to turn because it would just get stuck on its own pieces all the time
Clearly you haven't seen my first cube. It's so bad you literally could not turn it in certain directions. You have to force it super hard and make sure all the pieces are perfectly aligned (not even the slightest bit off) and it still may not move. A lot of the times I'd have to do the opposite move 3 times to make one move. (e.g. R'3 instead of R)
Make the turning worse by dumping sand and dirt into it while turning it, then use VERY coarse sandpaper on the inner pieces, the turning will be epic :)
I really wish this whole video was presented as a very serious tutorial. I run a Rubik's cube club for middle schoolers and would have loved to show them this without spoiling it! April fool's next year? 👀
When you solved your friend’s Rubik’s brand from a long time ago, and it takes 5 min bc it’s so hard to turn. I also have a gan cube, so when I got back, it felt soooo smooth.
@@vinesthemonkey I've played with an old rubik's cube from the 80s at one of my relatives' house and that thing turned like ass. It was so stiff it gave Oscar's workout cube a run for its money.
Thanks for the tutorial, i've been struggling finding a everyday household lube, I tried to follow your tutorial, and now my cube feels buttery smooth with only a BIT of resistance.
I think what’s happening is that when there wasn’t any interesting sound effect in the original audio he muted it. He probably uses a voiceover for his voice
@@whatdoiputhere224 That's very logical, but I would like to believe that the cube was so disgustingly filled with oils, the lube absorbed the sound impact 😂.
I just got a new cube after using one that was given to me by my brother about ten years ago. after using the new cube for not even a full day, my old cube feels like it's a literal rock that will not budge no matter how hard you push.
I got very lucky lol years ago I had an old rubiks brand cube but recently I have gotten into cubing because a friend lent me a cube. It was a gan 356 r s and turned super smoothly lol
I accidentally tightened my cube so much because I wasn’t paying attention. So much so that it couldn’t be loosened, and it was so terrible, probably worse than this cube, but the opposite side turned faster than I’ve ever turned.
You could use magnets and arrange them in a way the cube will lock in a scewed blocking position requiring you to forcefully turn against the magnets to actually turn it.
great job man this take a lot of dedication it looks like a lot of work and me being the lazy person i am it’s making me tired just watching you so all that😂
His explanation for taking magnets from one side of the stack really confused me. Still just as likely to accidentally orient them right. Don’t be so modest. Your orientation skill was 👍🏽
Z3Cubing: Lets make the worst turning cube ever! Rubik's: At least we dont sell the worst turning cubes edit:Oh btw, i started a new T-series vs Piediepie which is live on my channel edit 2: this is my most liked comment!
little fun fact i told one of my friends that is new to cubing to put hand sanitizer in his cube as a joke and he actually put it in. i was surprised when it worked really well. the next day it tuned as well as my grandma's old rubiks brand
oskar van deventer (oskarpuzzle) actually made a slow-turning cube a while back, named the workout cube. it was really interesting how much effort it took to turn it. its on his channel if you look it up
A rare peek into the Rubik’s factory
Lol that cracked me up
So true
In 2015
Yoyo Liu you mean dollar store
Xd true
The cube: I’m in horrible pain, please let me die
Z3cubing; haha bad cube funny
haha bad cube go brrr
at least the lightest cube was able to end its suffering
Let it die let it die let it shrivel up and die
@@joribencure8230 how can it go brrr if it go *slo*
haha funny bad cube [insert facebook video laugh sound effect]
The ultimate saying “more springs equals more gooder”.
Chris Tran: more magnets equals more gooder!
Hey you should’ve used those tiny ball magnets as the bearings so that it breaks 24/7 and turns on its own. Another way is to get the cube wet then dump it in sand then take it out again.
What a coincidence to have you here, fellow sk player!
It needs to be turnable but just very very bad.
@@floorpanel8749 You are a panel. You cant talkk
He probably made a new chemical compound inside of that rubiks cube without knowing.
Lmao
Wtf is that profile pic
@@pedroks7756 onbamb
Let's make a name
Memeynium
U forgot the Elmer’s Glue lube
I prefer the ketchup heinz baked beans combo tbh
Guys, what about the molten lava cube? It can’t spin if it’s melted by lava! Therefore, it’s the worst turning cube.
Skillertrap101 Gaming
I think the liquid uranium cube is best
What about babies? S-Perm
What about corona lube?
The beer I mean
i haven't even started cubing yet and this was incredibly painful to watch. i love it
Same
Not same but still funny
*painful
E
@@pizzainc.1465 oh no autocorrect being stupid
The first and only rubix cube I got when I was like 8 or something broke apart in my hands onto the street as I was turning it literally a minute after I had bought it. That marked the end of my sad cubing experience barely after it had even started.
It's Rubik's
It’s Rubik’s
What? Why is everybody in this comments thing saying Rubik’s
did you not get a refund?
Then the company got sued and you demanded a refund x2
You could've just borrowed mine
Same
I am dead
Lmao 😂😂😂
Lol
Lmao
"Let's add a 'little bit' of vaseline"
*scoops out half the jar *
190 likes no reply’s
@@GambitAckerman I am not worthy of replies.
@@kais.650I replied
@@kais.650 proved you wrong
@@C.y.c.l.o.n.e I suppose you did.
"You have to be careful because this stuff wil stain"
*proceeds to wipe it off with finger*
😠
😠😠
😠😠😠
😡
😡😡
When I visited my grandfather he had a cube from like 1975 which was arguably worse than what you just made, it was almost impossible to turn because it would just get stuck on its own pieces all the time
Dang, that's vintage
Rubik cubes began in 1980 lol
@@trickshotsmoviesandcubing2317 I think he meant 1985
@Trick Shots, comedy, cubing, and more
r/woooosh
@@pizzainc.1465 Oh okay sorry
I get it know
Z3: lubes a cube
Lube: makes cube better
Z3: You weren’t supposed to do that
Lmao
Me quihubo que subir a este hombre cero
If you put too much lube it just gets super bad.
@@superfastcuber4568 messed up my mgc 4x4 had to set it up and it took 1 hour :(
Btw he's called Alex
Clearly you haven't seen my first cube. It's so bad you literally could not turn it in certain directions. You have to force it super hard and make sure all the pieces are perfectly aligned (not even the slightest bit off) and it still may not move. A lot of the times I'd have to do the opposite move 3 times to make one move. (e.g. R'3 instead of R)
Yes my rubiks brand was like that the r’3 instead if r
Lol I payed 10 dollars for somethin even worse then that I average around 2 secs and I got a 5 mins solve on it
yes bro same I know we are same
That's mycubern
yes
I feel like this is the cube someone would take to like a convention for cubes just to see how many people he could break with said cube
5:04 I thought you were just gonna comically throw the spring away and assemble without, but THAT IS SO MUCH WORSE.
Imagine opening up your cube to find goo with random ball barrings and springs inside
*bearings
Try giving this to an non-cuber then they’ll see the difference between a bad cube and a gud cube
Username Here good
RZ Cubeing stfu
Cuyler reacts & more
Wth what did he do
Cuyler reacts & more how about you do
Cube is already dead
Make the turning worse by dumping sand and dirt into it while turning it, then use VERY coarse sandpaper on the inner pieces, the turning will be epic :)
Z3 cubing: doing all this stuff to make the “worst turning cube”
Me: using glue
7:08 dat one ball bearing : ight imma head out
I'm the 100th Like 🙃
ball bearing: this shit’s terrible i don’t want to be part of this.
@@fongus6420 I can see why.
@fongus6420 the same ball bearing that left: aight imma go to a pyraminx that uses ball bearings and join it. f_ck this mess, im outta here
you've gotta come back in a few motnh to see what the vaseline and wd-40 did to the cube. it will definitely be drier and have dried plastic!
AMD LOVER
I feel like you could've sanded the inside faces of the pieces for a nice, gritty turn.
5:14 there's probably one person who thinks this is legit and actually puts their springs like that
Fun fact!
If you lube a cube with glue, it makes it really fast
rEaLlY!?!?!?!?!?!?!? ö
EJ Cortez Can Confirm! 😎😎😎😎
@@potatounicorn9480 Oh ReAlLy. People like you who can't take a joke or sarcasm don't deserve to be on the internet.
I told my cousin this and he put glue in his gan x
@@mattybsongs9703 Lol did he do it?
I was dying with laughter when you just poured ball bearings into the cube lmaoooo
I really wish this whole video was presented as a very serious tutorial. I run a Rubik's cube club for middle schoolers and would have loved to show them this without spoiling it! April fool's next year? 👀
Dollar tree cubes after a year: *looks at this* look at what they need to mimic a fraction of your power
12:00 when someone touches ur cube during quarantine
That’s funny
lol
So true
Lmao
Lol i did that to
When you solved your friend’s Rubik’s brand from a long time ago, and it takes 5 min bc it’s so hard to turn. I also have a gan cube, so when I got back, it felt soooo smooth.
I am that friend in my friend group
Me: I want a speed cube.
Mom: we already have one at home.
The speed cube:
im amazed of the fact that this is still faster than my original Rubiks cube
Remember those miniature cubes you would get at your friend’s bday party
Jack Montoya YES
That’s what I first solved the cube on
I solved my fist cube on one of those lol
My popped in like 30 seconds
Z3: makes a cube with repelling magnets.
Yj: RIGHT THAT DOWN.
Wow, your grammar is on point.
Your spelling is top notch
@DMG Tv his spelling is a different case
He has a case of dumbspellingphobia
With every modification z3 makes to the cube he further proves to us how much of a menace he is!
Him: "Making the worst turning cube"
Dollar Store Cube: You dare oppose me mortal.
I think you could make it worse by making some of the magnets repel and some not
GravCube; Made as an extra challenge with that effect.
Pain
You should've started with a Rubik's brand cube, second hand of course.
LOL
secondhand means broken in which makes it significantly better than fresh out of the box rubik's brand
@@vinesthemonkey I've played with an old rubik's cube from the 80s at one of my relatives' house and that thing turned like ass. It was so stiff it gave Oscar's workout cube a run for its money.
Man’s made the slowest turning cube possible, but it still turns faster than my cheap plastic off brand cube
Imagine bringing this into a cube repair shop lol
0:25 D50, I sure would like to see that lol
it is on his second channel Z2 cubing
He said D15
@@sachinext nah it's 50
He definetely said fifty
He said 50
Idk how I got here. It's midnight on Christmas and I'm watching someone make a broken rubik's cube. I love this
You may have these 3 fears
1.not being able to sleep
2.not being able to wake up when you fall asleep
3.making random comments like this one
Thanks for the tutorial, i've been struggling finding a everyday household lube, I tried to follow your tutorial, and now my cube feels buttery smooth with only a BIT of resistance.
13:23 I like how whenever he dropped the cube it didn't make any sound
WTF
Tf how
I think what’s happening is that when there wasn’t any interesting sound effect in the original audio he muted it. He probably uses a voiceover for his voice
@@whatdoiputhere224 That's very logical, but I would like to believe that the cube was so disgustingly filled with oils, the lube absorbed the sound impact 😂.
@@supercalifragilisticex lmao
This cube represents 2020 perfectly...
PI GYE ikr
God making 2020:
13:06
Come on 2020 isn't that bad.
@Stephen amaxamun 2020 was smooth compared to the years where ww1 and ww2 is a thing.And if you think 2020 is bad wait till this year gets worse.
Me: Can I have a rubik's cube?
Mom: We have a rubik's cube at home
The rubik's cube at home:
rubik's brand cube from 20+ years ago: look what they need to mimic a fraction of our power
The magnets were the best part- how it never rests in a nice way
I just got a new cube after using one that was given to me by my brother about ten years ago. after using the new cube for not even a full day, my old cube feels like it's a literal rock that will not budge no matter how hard you push.
I got very lucky lol years ago I had an old rubiks brand cube but recently I have gotten into cubing because a friend lent me a cube. It was a gan 356 r s and turned super smoothly lol
After I got my rs3m, my Rubik's brand feels like literal garbage, and my friends "speed cube" that I thought was insanely good also felt like garbage
I accidentally tightened my cube so much because I wasn’t paying attention. So much so that it couldn’t be loosened, and it was so terrible, probably worse than this cube, but the opposite side turned faster than I’ve ever turned.
Z3Cubing: I have made the worst turning Rubik's Cube
Rubik's brand: Hold my beer
Dollar store cube:Hold my beer
Me: mom can we buy a Rubik's Cube?
Mom: we have a Rubik's Cube at home
*Rubik's Cube at home:*
“Grabs rubix brand okay we are done here”
It's rubiks
@@kleveronefourthreetwo Most people think it’s rubik’s, but it’s actually rubix, maybe do research
@@burntpt9816 bro look up the brand and look up the original creator’s name
@@burntpt9816 cringe moment
Bruh what the hell
POV: You waste 13 minutes making the worst cube ever when you could have just gone to the dollar store.
i like how his intro music is like full of joy when the vid is just about making a cube bad ::))
This is honestly how Sheng Shou lubes their cubes
Yep the knock offs suck
@@chill-ified2913 gan cubes: c r y i n g
@@chill-ified2913 bruh rubik's brands are the worst
@@hippugamer6689 dollar store cubes:
Z3: If u wanna see the finished product go to 7:58
Me: goes to 7:58
Z3:If u skipped to this point u should really watch me do the work
Me: ...
lol get dunked nerd
get nae nae'd lmao
No I will not sub to him
6:31 | rubix brand engineers:
how much lube do you want in your cube?
Z3Cubing: *yes*
“Oh man, that comes out quick”
- Z3Cubing, 2020
My dumps...
**insert lenny face**
You should of stared with a rubiks brand cube so it was already bad
Edit Thanks for for 300 hundred likes
Well that would be not fair
And you shouldn’t started with it
But then he couldn’t have done anything to it because it’s difficult to alter a rubiks brand
Rubik’s brand aren’t that bad atleast when they are broken in.
@@jaxsonbarry947 try an older one. The new ones are fine, but the old ones are terrible
@@platlim1685 very true
Nobody:
The “Cubers” using “mods”:
This feels like the toilet ice cream from TikTok, and I have never solved a Rubik cube.
Reverse magnets almost sound like they would increase the speed and you should have started with a dollar store cube
You could use magnets and arrange them in a way the cube will lock in a scewed blocking position requiring you to forcefully turn against the magnets to actually turn it.
great job man this take a lot of dedication it looks like a lot of work and me being the lazy person i am it’s making me tired just watching you so all that😂
Step 1: Get a Rubik’s brand cube
Step 2: prepare to get sub 10 mins
When he used hand sanitizer
Everybody: 👁👄👁 he still has some!!!
Dude you shouldn't be inhaling hand sanitizer no duh he still has some
It's just a joke 🙄🙄🙄🙄
I was joking too
Lol
Ok lol
If i had to describe this video in one word as a cuber, it would be...
TORTURE.
Everyone: "all you have to do is get a rubiks brand cube"
Me who only has a rubiks brand cube: why am I still here just to suffer
Rubik’s brand: Finally a worthy opponent, OUR BATTLE WILL BE LEGENDARY
A really good video I liked, I'm glad there are other people making great videos on Rubik's Cube
You could’ve just stuck stickers on a brick
right
And painted the brick black
LOL
The cubes that you win as prizes: *pathetic*
Z3cubing: "making the worst turning cube"
Me already having a worse one naturally: *laughs in sadness*
It'S sTiLl BeTtEr ThAn RuBiK's BrAnD.
My Rubik's brand cube is better than that cube.
@@geraldmoon2382 boomer
@@JaydenTa millennial
Gerald Moon
you’re just trying to come back from not getting the jokr
I agree Mamta sahu
Them:omg my cube has so many pops and collapses I wonder why
Their cube: 9:21
His explanation for taking magnets from one side of the stack really confused me. Still just as likely to accidentally orient them right. Don’t be so modest. Your orientation skill was 👍🏽
”this is the worst turning cube ever”
my cube:
11:35 "I'm kidding its compressed there"
Air
This was the sequel we didn't deserve, but wanted, bad.
And WD-40? Oh boy this is the pinnacle.
M3ko2 my dad said just lube my cube with wd 40 does that ruin the cube?
i saw u on tingmam
@@nahbus2033 hes everywhere hes a youcuber too just less subs
The pure joy in your voice is what made this video great
Rubik's: "Write that down write that down!"
Z3Cubing: Lets make the worst turning cube ever!
Rubik's: At least we dont sell the worst turning cubes
edit:Oh btw, i started a new T-series vs Piediepie which is live on my channel
edit 2: this is my most liked comment!
Lol when i switched to speedcube I thought that my old cube got worse somehow
But does he sell them?
@@UnknownRager96 its a joke
@@williamanderson6354 he was not talking about rubiks
@@ElectroMadness300
Then what does he mean by
"Rubik's: at least we don't sell the worst cube anymore"
There needs to be a contest where instead of seeing who can solve the cube the fastest they see who can swap the stickers around the fastest.
I would attend
@EntityGaming I'm not even going to answer that
@EntityGaming JuSt BuY a StIcKeReD cUbE
@gone forever you get a pack of markers
"More springs is more gooder."
- Z3Cubing May 2nd 2020
Z3 : Today I’m making the world’s worst turning cube!
Dollar Store Cube : Am I a joke to you?
Finally a accurate representation of the creation of the original rubik's cube
11:19 "That does not react with plastic very well"
1:31 isn’t it weird how Gan used this concept to make the best quality speedcube on the market
Little did he know reverse the magnets we’re going to be featured in the new gan 13 . He was ahead of his time
12:35 I'm literally screaming with pain inside. AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Yeah! It’s so cringe!!!!! AAAAAAAAAAAAAAAARGHHH
7:58 for any one who just wants to skip to the lubing part as fast as possible
little fun fact i told one of my friends that is new to cubing to put hand sanitizer in his cube as a joke and he actually put it in. i was surprised when it worked really well. the next day it tuned as well as my grandma's old rubiks brand
This guy has never seen the souvenir cubes they give to people over here in Brazil. This turns like a dream compared to those lmao
The worst cube is actually Rubik’s brand
i kinda hate that insult
ah yes, the floor is made of floor
Z3Cubing: makes the slowest cube ever
The cube from Dollar store: am I a joke to you
oskar van deventer (oskarpuzzle) actually made a slow-turning cube a while back, named the workout cube. it was really interesting how much effort it took to turn it. its on his channel if you look it up
7:23. he got us in the first half, not gonna lie