3D Printed Ultimate Drinks Mixer (Arduino Cocktail Maker)
Вставка
- Опубліковано 12 бер 2021
- Hi everyone,
It's been a while since I've uploaded a video. But with this video, I hope I can make it up to you. This is my long-anticipated over-engineered drinks mixer. But with your help, we can probably make it even better. Comment on your thoughts about this machine and leave your ideas behind. You would really help me if you left a LIKE :). I spend a lot of money on this project and if you are interested I'll make a follow-up video explaining the technical details and releasing all the code, schematics, and files! Let me know in the comments.
Great Scott video:
• Make your own crude Co...
#arduino #3dprinting #diy #youtube #arduinoproject #cocktail #cocktailmaker #dream #beast #100days - Наука та технологія
Comment your favourite drink!!
Ps: like WoLpH commented acidic drinks an copper are a bad combo
vodka
Impressive work, keen for the follow up video and files :)
This video is really amazing and inspiring!! By any chance will you release the code for your machine?
I've been meaning to make something like this (although once i get the funds+time even MORE overengineered/complicated)!
Great video, i will definetly build upon your work!
Awesome to hear I will make a follow up video and release the plans perhaps you can use some of the code or parts :)
Wahey, he's back! Well done - you finished a project!
Yeah man it took so long messing with the code etc perfecting the interface and redesigning the lever so it worked well with the new hall sensor :)
Good stuff!
Pretty awesome. I might have to build one too. LoL.
Gin and tonic. Great video 👍
so cool
Awesome! would say Rum & Coke!
wow very cool! I'd love to see the schematics for this project. You'd 100% be featured on the front page of thingiverse
Questions for you: why use the Ikea drills instead of a DC regular pump?
yeah I hope so! Thank you I'll be working on this as soon as I have spare time again :). And since they are always the same and always in stock :) and the battery and charger are all included
Fav drink is probably: licor 43 & milk or bacardi & cola
My fav is nitro cold brew
While the drill parts provide a lot of torque, they do create waste from case and other parts not being used, and are noisy. I was thinking that even an 8-bit 3D printer board with some TMC2208 drivers would be much quieter and easily allow four or five pumps.
I'd love to have something that I could grab some cold water from the fridge, place it under the dispenser, and have it place my desired combination of lemon and lime juices into the water for me. Quiet, space saving, and quick (if I could place it in the fridge and have the water dispensed at the same time) with a nice interface are the qualities I'd be looking for.
Gin Tonic
I would like to see the technical video
Awesome project! It should be noted that copper becomes toxic when in contact with acidic solutions so I think you would do better by dropping the silicone in the bottle instead :)
Yeah I wasn't to keen on the copper as well. Thanks for mentioning it again. I said in my video that ideally the rods should be made of 316 stainless steel :)
@@PattysLab I know :) But copper for water isn't that bad, copper for acidic drinks is a **really** bad idea. ua-cam.com/video/saxga-xm0Rk/v-deo.html
Yeah all the old water pipes here in the netherlands are made of copper. I was unfortunately not able due to the pandemic to pick up and bend some stainless at my parents house, hence the copper still bit if release the plans I'll make sure to point this out that only silicone or 316 stainless should be used
@@PattysLab You're lucky in that case, my pipes (also the Netherlands) are largely lead ;) In any case, copper by itself is perfectly safe to drink basic fluids from, it's acidic fluids that make it dangerous. And the worst thing is that you don't notice anything until it's too late.
@@WoLpH they will eventually change out the lead for plastic. And about the copper I'll try to get the stainless 💪🏻💪🏻 so it's save for acidic drinks aswell
nice! i planing year ago do something like this...but my project dont moving after one tube for shot
Well perhaps you can start from my files I'll release a video in a couple of weeks
Nice, but to avoid cleaning, upside down bottle push-release valves might be better.
Great project. You are the only one that I have seen using the silicone stoppers. I tried searching for that stopper, but can't find ones like you have in your video. Do you have the actual name or a link to them? Thanks!
Or did you modify one to prevent the vacuum?
Realy nice Work !!!
My Drinks :D :
Jacky, Coke
Havana, Coke
CaptainMorgan or BarcadiOakheart, Coke
Gin Tonic
So we need more Motors and Mixingtypes :D
I think Shortcutbutton and a fix liquid amount (for shots 2cl(Girlsize) 4cl) woulf be even better.. but its hard to calibrate i think...
For that I might need to switch to a geared stepper motor but more motors and more combinations should be possible and more fun 👌🏻
Yes good idea a pancakesteper would fit perfectly.. but it boost the cost very fast :D
@@Qub1tus steppers are really weak compared to DC motors even a normal nema 17 large version couldn't make it with the large hose. But perhaps with a gearbox 🤔
Trojka/7-up, Bacardi razz/7-up and sourz
Me interesa algo asi para michealdas
great work!! can i buy the whole process from you?? i need a prototype with 4 pumps and a way to add new drinks
Do you mean the code etc?
@@PattysLab the whole process and the 3d printed files
@@joelterrero6689 I'll be releasing all the plans code and the models in the future I have not worked out all the bugs and I also want to improve the pomp's comparability with different motors
Add few colourful leds!
You could know the amount of ml that comes out of the machine. All the best
FREEE PAUROSOOOO
After all the time now. Would you do something different? Plan to build this next week :)
I was thinking of maybe using Gravity to let the drinks flow into the glass instead of pumps and use Fluid servos to Control the flow. Or at least change the DC motors of the pump for steppers
@@PattysLab Thank you so much for the reply! It seems crazy to me that you made by far the best and most potent DIY peristaltic pump on the internet and you advise against using these pumps. Saw that your files were remixed for a NEMA23 but all the pumps with NEMA23 seem to be quite weak - I doubt they managed to pump 7l/min. So I'm going for the gravity assist :) Like a servo clamping on a silicon tube?
@@a1xon It's like you red my mind I was thinking of clamping the Silicone tube as well. One small thing you need some sort of air vent in the bottle or some sort of air inlet else no liquid will flow out ;). Maybe a better idea is to still use the pumps for bottles that are hard to mount upside down. You could also use the pumps and the sevos to pick the Silicone lines and make a multiway valve so you need fewer pumps.
@@PattysLab may I buy you a beer?
Haha that's very kind, cheers 🍻!
How is it possible to create a business with these machines?
My favorite drink is Gin witj cucmber sprite
"Let's start with intensity 0 ,the pussy mode" lmfaoooo
.Great work, can u please share 3d files for this.
Yeah I'm working on it to finalize all of it and make it a thingiverse download
@@PattysLab Great!!!!
Please also explain code of it.
Yeah I'll ;)
Peach Mellow Yellow Zero in a 'coca-cola "freestyle machine"
Best drink of the world is liquor 43 and multivitamin juice
Gin & Tonic
Nu nog een peltier koelunit erbij:)
Perfect
Rum with coke 💪
Gin Tonic
whiskey
Lemonade is made with lemons, but that is made with syrup: so it's a syrupade. 🤔
really don't understand what the machine is trying to do here, replace the pour method? Surely its easier just to pour the required amount from the bottles!!! ????
Wodka-Coke!
Wodka and tomato