This has been the best unbiased review of the Bad Boy Revolt I've seen from someone who understands the issues full-time commercial/part-time commercial mowers are concerned with. Thank you very much.
I melted my factory discharge chute as well. I added the 90 degree fitting to my exhaust. Only thing now, if the wind is blowing just right, the exhaust gets blown back on you and you’re breathing it in every other pass.
excellent honest review! my 2020 maverick with a kawasaki I thought was thirsty, it uses approx 4.5-5 gallons in the 5 acre property I mow (and it's thin farm grass)
i see you removed the two bolts left right side that are used to lock foot platform in viertical position. why did you remove them? also question when you stand on the foot platform (it goes from angled up position at rest to almost level, does it make a pop sound? under the frame is a silver bolt that the platform comes i to contact.with, its in the middle of the.round plastic flex suspension system. so does yours make this pop sound?
That bolt with the spring in the middle of the platform is not a bolt it's the blade safety if that is not pressed up which happens when you stand on the platform the mower would shut off and sometimes you can hear it when you first stand on or get off
Gotta trim that tire plug. Should be cut flush with a razor. Don't want to yank it out. I'd screw down the foot pad. Maybe support the wiring bundle under the ignition switch with a strategically placed zip tie so it doesn't rattle out.
Well after another year or more, what are your thoughts now? Thinking of buying one. I have been using Exmark throughout my career, but thinking of changing. Just looking for your honest opinion after some additional time.
You did receive the wrong shoot, my chute plate is flat were your is square on top, mine will close flat or has a lock that keeps it open an inch or 2, I didnt notice the cupholder falls out and I haven't had the ignition problem yet but I cant find glue to keep my foot mat on, I may sand a little to roughen it up
Would you buy it again? Looking to add a 36" stander for backyarda. We are currently running two 2019 61" Rebels. Hated the tires also, switched to TWEELS
How do you feel about the rebels?? I'm looking to upgrade and seriously thinking about a Rebel bit don't know to pull the trigger on it or look around for other options??
So I have a couple of questions as I watched a review on the 36" revolt. He had 2 issues and if I can find the video I'll list it for you to see. He had issues with the deck pulleys and the belts getting slung off and shredded. Fairly low hours. Have you had those and dont know if the pulleys and springs are same on 36 and the size you have. The second was the black bar in the slot where the deck lift handle is. Something about getting in the way and keeping it from being operated. It slid over in the way. Is that a issue with yours. Not sure how long these mowers have been out and when he got his. ua-cam.com/video/dxQOEHaNq2E/v-deo.html
I have these tires on my outlaw XP and I hate them, they tear up grass and traction is terrrible. I am getting ready to buy a Revolt and was curios if these tires came on this mower or not.
I love the Reapers on my XP (and newer Rogue). I quit getting stuck all the time and they don’t tear up grass (from spinning) like the plain turf tread. Are you guys running them at the right 10-12 psi? Seems odd for us to have such a different experience.
Almost built like the spartan kg mower... I did not like the spartan kg I'm too short and it felt awkward... I like the john deere 648m mower it's just right for me but I do like the look of this mower and that spartan look wise but not comfort and stand on wise
This has been the best unbiased review of the Bad Boy Revolt I've seen from someone who understands the issues full-time commercial/part-time commercial mowers are concerned with. Thank you very much.
If you run your mower for about 5 min. before you change the oil, and open up the dip stick, the oil will drain in 3 minutes.
Just FYI you can buy bottle holders to fit at any bike shop. that is just a bike bottle holder.
we just bought a 61" revolt its a beast of a mower
I melted my factory discharge chute as well. I added the 90 degree fitting to my exhaust. Only thing now, if the wind is blowing just right, the exhaust gets blown back on you and you’re breathing it in every other pass.
Sounds like the stand on is running while draining the oil.
excellent honest review! my 2020 maverick with a kawasaki I thought was thirsty, it uses approx 4.5-5 gallons in the 5 acre property I mow (and it's thin farm grass)
i see you removed the two bolts left right side that are used to lock foot platform in viertical position. why did you remove them? also question when you stand on the foot platform (it goes from angled up position at rest to almost level, does it make a pop sound? under the frame is a silver bolt that the platform comes i to contact.with, its in the middle of the.round plastic flex suspension system. so does yours make this pop sound?
That bolt with the spring in the middle of the platform is not a bolt it's the blade safety if that is not pressed up which happens when you stand on the platform the mower would shut off and sometimes you can hear it when you first stand on or get off
Gotta trim that tire plug. Should be cut flush with a razor. Don't want to yank it out. I'd screw down the foot pad. Maybe support the wiring bundle under the ignition switch with a strategically placed zip tie so it doesn't rattle out.
Well after another year or more, what are your thoughts now? Thinking of buying one. I have been using Exmark throughout my career, but thinking of changing. Just looking for your honest opinion after some additional time.
Any problems with it throwing the belt? Thinking of buying one and don’t want to have to deal with that issue
Thank you. I have one and love it . However it does have its issues.
Our gravelys with the Kawasaki fx730v do excellent on the gas usage. I wonder if the carb needs adjustment.
Nice mower man, Keep up the good work man.
Thanks Brian.
Any update on the mower??
You had the oil filler cap on that's why it was draining slow .
Made no difference on the last oil change i did.
I use a vacuum to suck the oil up through the dip stick. No mess. EasyPeasy
Dope mower.!
You mow 3 acres with a 48”? Go get you a 61” you wont regret it. Thanks for the review
You did receive the wrong shoot, my chute plate is flat were your is square on top, mine will close flat or has a lock that keeps it open an inch or 2, I didnt notice the cupholder falls out and I haven't had the ignition problem yet but I cant find glue to keep my foot mat on, I may sand a little to roughen it up
great video
Pull. The. Dipstick.
Tires look like would tear grass right out
Carlilse pro trail 2 I think it's great tire and versa turf
Thinking of picking one of these up for next season. How does it stripe?
It would probably do better on grass other than bermuda and st augustine. not terrible though.
Would you buy it again? Looking to add a 36" stander for backyarda. We are currently running two 2019 61" Rebels. Hated the tires also, switched to TWEELS
How do you feel about the rebels?? I'm looking to upgrade and seriously thinking about a Rebel bit don't know to pull the trigger on it or look around for other options??
Thank you!
Great review.
Why do prefer stand on vs sit down
iv got the same mower and yes that thing drinks gas like crazy.
Another guy said he was selling his
Changed 4 deck belts
47 hours. How is yours running
Aceite 20w50...
Ese aceite usa ese motor ..?
I have the same mower , any web to order blades for the machine???
Pull the dipstick oil drains faster.
Thanks
So I have a couple of questions as I watched a review on the 36" revolt. He had 2 issues and if I can find the video I'll list it for you to see. He had issues with the deck pulleys and the belts getting slung off and shredded. Fairly low hours. Have you had those and dont know if the pulleys and springs are same on 36 and the size you have.
The second was the black bar in the slot where the deck lift handle is. Something about getting in the way and keeping it from being operated. It slid over in the way. Is that a issue with yours.
Not sure how long these mowers have been out and when he got his.
ua-cam.com/video/dxQOEHaNq2E/v-deo.html
Love mine....
You stand next to 737's when recording as well huh...
What do you like and dislike most when standing next to jets while recording?
Do another review on the mower with the actual hours
u first
I have these tires on my outlaw XP and I hate them, they tear up grass and traction is terrrible. I am getting ready to buy a Revolt and was curios if these tires came on this mower or not.
Corey Roark Same here bud. I have a 2017 outlaw XP with the same tires and they eat more grass than my mother n law..........lol
I love the Reapers on my XP (and newer Rogue). I quit getting stuck all the time and they don’t tear up grass (from spinning) like the plain turf tread. Are you guys running them at the right 10-12 psi? Seems odd for us to have such a different experience.
Or use bed liner there
Almost built like the spartan kg mower... I did not like the spartan kg I'm too short and it felt awkward... I like the john deere 648m mower it's just right for me but I do like the look of this mower and that spartan look wise but not comfort and stand on wise
You still like your bad boy stand on?
Komo me salió esto en recomendados?
UA-cam modo loc0
To much noise