You just saved me a LOT of work and stress!!! Your “cutting” the the stone layout in half with the mold is GENIUS!! I am having to run a path from my deck to the pool and it’s going to be at a hard angle. So i was trying to figure out how to chop bricks into triangles for the big triangle space it’s going to create between the path and deck stairs. Now i am going to just cut it like you did
This is the best video i have seen on using these molds. Thank you for sharing this. I will be starting my pathway in the next week depending on the weather. Thank you for sharing the video again. Much appreciated.
Hint; Mix 50% cement and 50% sand. Mix it wet. Using a paint brush (4") , brush the mix into the surface. This will cover any aggregate and give you a smooth, lighter gray finish. Of course you can't do this on colored cement but you can add coloring to the cover mix. This must be done when the cement is still wet. Experiment first.
looks good and i agree with you that quikrete is NOT what they claim. i used 20-80 pound bags for steps. i did what they claimed- 3quarts and it was to dry. As i did more bags i used about 5 quarts and it was better. I dont really agree with quikrete and wish they would have been more honest.
Hello👋🙋♂️ there... Amazing and very interesting video🎥... Super like👌👌👌 Good information and very helpful🎥 Do keep posting Warm regards and best👍💯 wishes The UnknownManCub 👍😎👨🏭
Do you think you can pull the mold when the batch of cement is still usable? I'm looking into getting more than one colour per mold and I want to do a few molds per day.
hi, where did u buy your moulds, and if I buy quikerete cement, I bag , how much water will I add, and. Before I start , do I have to rake it it's or spread some sand. So that weeds will not come out,.! Thanks
Talking about the line that goes down the your path. did you turn the stencil 90° on your next poor? Because I know mine says that you're supposed to rotate the form for your next form 90°
Thanks for sharing!! Just curious, did you put any gravel underneath or just straight cement on the ground? Im sure i have a flat ground. Bout to start mine too soon. Thanks for the input!
I would not use 2 molds. You'll have double the space in between as you use them. YOu can remove the mold immediately after you fill with concrete, no need to wait, and just start using that one again
The gaps between stones within your mold and the gap between stones of adjacent molds will be different. Between molds the gap will be twice as big and the mold form will be easily noticed. Not a look most would want but maybe that's what you're going for. good luck.
You probably could do one bag every half hour if you're busting tail. Each bag does almost 2 forms. I did it slow and spread it out over a couple days. Highly recommend more water than what it says on the bag
I'm no expert, but this guy is laying this stuff directly on top of the soil, surely that can't be right! Don't you have to put down some sort of membrane and sand first, or at least plastic and sand?
You just saved me a LOT of work and stress!!! Your “cutting” the the stone layout in half with the mold is GENIUS!! I am having to run a path from my deck to the pool and it’s going to be at a hard angle. So i was trying to figure out how to chop bricks into triangles for the big triangle space it’s going to create between the path and deck stairs. Now i am going to just cut it like you did
This is the best video i have seen on using these molds. Thank you for sharing this. I will be starting my pathway in the next week depending on the weather. Thank you for sharing the video again. Much appreciated.
Hint; Mix 50% cement and 50% sand. Mix it wet. Using a paint brush (4") , brush the mix into the surface. This will cover any aggregate and give you a smooth, lighter gray finish. Of course you can't do this on colored cement but you can add coloring to the cover mix. This must be done when the cement is still wet. Experiment first.
Thanks! Great advice about what happens if you don't use enough water. I think someone said somewhere the consistency should be like peanut butter.
I got almost 4 molds for 2 bags looks nice man
Great tips here. I'm about to do mine this week. Thanks.
Great in-depth info , starting on same path v soon , cheers man👍🏾
looks good and i agree with you that quikrete is NOT what they claim. i used 20-80 pound bags for steps. i did what they claimed- 3quarts and it was to dry. As i did more bags i used about 5 quarts and it was better. I dont really agree with quikrete and wish they would have been more honest.
Great video. Yes I found 5 qts water worked well for me using the 80 lb bag.
I was getting just under 2 molds done per 80 lb bag.
Hello👋🙋♂️ there...
Amazing and very interesting video🎥... Super like👌👌👌
Good information and very helpful🎥
Do keep posting
Warm regards and best👍💯 wishes
The UnknownManCub 👍😎👨🏭
Nice video. Thank you. Struggled with the water also.
Dog: is this going on UA-cam?
Owner: yep!
Dog: get me out of the video!
He doesn't want to sign his name to this job lol
how many mold can 80 pound bag makes?
Kudos and thanks for this. I was about to use actual pavers to match an existing portion.
Do you think you can pull the mold when the batch of cement is still usable? I'm looking into getting more than one colour per mold and I want to do a few molds per day.
very useful, some great recos. thanks!
no leveling sand or paver base?
hi, where did u buy your moulds, and if I buy quikerete cement, I bag , how much water will I add, and. Before I start , do I have to rake it it's or spread some sand. So that weeds will not come out,.! Thanks
Better price on eBay
Lol
Great video; thank you!
Talking about the line that goes down the your path. did you turn the stencil 90° on your next poor? Because I know mine says that you're supposed to rotate the form for your next form 90°
What is the size of the stencil?
is that the regular color you dont have any stain? Any colring
coloring
So helpful. Thank you.
how has it held up? any cracks and would you do this again?
Great video. Awesome
Great tips thank you
Great tips thanks!
Thanks for sharing!! Just curious, did you put any gravel underneath or just straight cement on the ground? Im sure i have a flat ground. Bout to start mine too soon. Thanks for the input!
Following
Following
Timothy Ince - following
Kimsherri Sanders - following
Sweet
My concrete sticks when I try to pick it up any reasons why ? I have the same one you are using
I know a guy who water sprays it, and sprays it with vegetable oil before starting a new mold. I think I'll try that.
Will a 60Lb bag be enough to fill one mold? Reason I ask is because thats what some folks are recommending from Amazon reviews.
The 80 lb bags in the video each made just about 2 molds. So 60 lb should fill one and then some
@@sandiegobirdman Thanks for the heads up. I will have 2 molds so I will get the 80 lbs bag and do both at the same time.
I would not use 2 molds. You'll have double the space in between as you use them. YOu can remove the mold immediately after you fill with concrete, no need to wait, and just start using that one again
@@brianbenz5183 Thanks. I'll be doing a double wide path so two will help me out a lot.
The gaps between stones within your mold and the gap between stones of adjacent molds will be different. Between molds the gap will be twice as big and the mold form will be easily noticed. Not a look most would want but maybe that's what you're going for. good luck.
How many can you do in a day. I need to do 150. Good video by the way. Thanks.
You probably could do one bag every half hour if you're busting tail. Each bag does almost 2 forms. I did it slow and spread it out over a couple days. Highly recommend more water than what it says on the bag
nice job
I want to do the same can I ride motorcycle on top of it
I ride on mine and have no problems
I'm no expert, but this guy is laying this stuff directly on top of the soil, surely that can't be right! Don't you have to put down some sort of membrane and sand first, or at least plastic and sand?
You are correct...you are no expert
🤣🤣🤣👍 Great answer!!
7+ mins of talking. Show the process, at least some actual work🤦🏻♂️