To get the full plastic panel off you need to take the screw out back of the door and you also need to remove the outer plastic for the key lock and remove the door handle
Thank you, I’m sure something else will break in the future and I’ll get another crack at it. I did see that it was connected to the handle somehow but with the weather threatening to turn I couldn’t take the time to find out how.
@@Account-hw4ykgive yourself time, take pictures to remind yourself how everything goes together, don’t try and force the panel off and watch other vids as other people focus on different parts of the job. Good luck 👍
There a few other videos online basically before you take all the 10mm bolts out take glass out door handle outer off there little screw back of door take the 3 torxs out for the catch when you take the outer handle off you feel it slide out but when you put it back together there is a silver screw push that down slot the handle back in put the cap back on and pull door handle you will feel it click back to the other bits door card off like showen in video don't have to speak out either but slide window down to the two holes for window clips then the screws out of lock and door handle then remove the 10mms it should lift and slide you will have to disconnect the loom from body to get the full panel out don't worry it goes back in no problems stuck message
Sorry, that’s probably my accent getting in the way. I was saying that the door was very tinny sounding so if you wanted decent speakers in there it would be a good idea to get some sound deadening on the door first
To get the full plastic panel off you need to take the screw out back of the door and you also need to remove the outer plastic for the key lock and remove the door handle
Thank you, I’m sure something else will break in the future and I’ll get another crack at it. I did see that it was connected to the handle somehow but with the weather threatening to turn I couldn’t take the time to find out how.
This is a job I’m doing to mine tomorrow any advice?
@@Account-hw4ykgive yourself time, take pictures to remind yourself how everything goes together, don’t try and force the panel off and watch other vids as other people focus on different parts of the job. Good luck 👍
There a few other videos online basically before you take all the 10mm bolts out take glass out door handle outer off there little screw back of door take the 3 torxs out for the catch when you take the outer handle off you feel it slide out but when you put it back together there is a silver screw push that down slot the handle back in put the cap back on and pull door handle you will feel it click back to the other bits door card off like showen in video don't have to speak out either but slide window down to the two holes for window clips then the screws out of lock and door handle then remove the 10mms it should lift and slide you will have to disconnect the loom from body to get the full panel out don't worry it goes back in no problems stuck message
Sorry what did you say about the speakers? Get some sound dead speakers? Any recommendations?
Sorry, that’s probably my accent getting in the way. I was saying that the door was very tinny sounding so if you wanted decent speakers in there it would be a good idea to get some sound deadening on the door first