Nilight lightbar Install and Review - 52" Curved Light Bar
Вставка
- Опубліковано 6 жов 2024
- So your considering a more budget friendly light bar and your curious if it will be bright enough. In this video, we install the light bar and pods on a 2017 Polaris Ranger XP and answer that question for you. Is it bright enough? Watch the video to find out.
Light Bar, Pods, Harness and switches can be found here: derangedoffroa...
Light bar mounts: www.tractorsup...
$39 52” light bar from Amazon. Lights up the world. Can’t the see the label when cruising down the trails. Love the videos. Keep on keeping on.
I bought a 99 dollar 13 or 15 inch light bar rated at 5500 lumens from TSC and it shines down the road about a 1/4 mile!!! Absolutely worth every penny i spen, no its not a RIGID by far but for what i need and do with it works like a CHAMP!!!!! My UTV stays inside and i have always taken care on my stuff so hopefully it will last for several years!!!!
I've got the pods and they are great, of course if you compare to rigid they are not as bright but the price is literally like a 80% difference. If I had the spending cash for rigid I'd totally run rigid all the way. But for my honest military pay these bad boys get the job done! Great video brother! I'm definitely looking into a led bar now, you sold this for me!. Take it easy man!
Thanks for your service. Also, I am reposting this for you.
You can get Nilight pods from Amazon, in pairs or sets of 4. Three different brightness. I have been using Nilight for years, almost no issues. When I have a bad cube, or it goes bad quickly, one nice phone call and they shipped me a whole new set, not just the one bad cube. And they are SO DANG INEXPENSIVE!! Also note that the lightbar he shows is rated at 783 watts. While that is technically 65.25 amps, I have one on a 30 amp relay and 30 amp fuse. No issues. The HD wire harness he is showing comes with 30 and 40 amp fuses and a good relay (all rocker switches are rated for only about 20 amps, save your switches and run a relay, they are not hard at all)
2 Nilight 60 watt: www.amazon.com/gp/product/B07SFG7GN9/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&th=1
4 Nilight 60 watt: www.amazon.com/Nilight-Triple-Driving-Waterproof-Warranty/dp/B081Q1ZVN6/ref=sr_1_12?crid=85AT9WMITM1M&keywords=nilight+led+lights&qid=1638171932&qsid=130-1248870-4279226&s=automotive&sprefix=nilight%2Cautomotive%2C173&sr=1-12&sres=B06XPHPMQ4%2CB06XQGQTXQ%2CB00IY3YLCI%2CB07ZLWJZLT%2CB082F4W617%2CB07SFG7GN9%2CB07PWLZDNH%2CB012CGFOOQ%2CB081Q1ZVN6%2CB01KRV3PNA%2CB07Y1FYYWM%2CB07D5S1SF5%2CB00G620ZVU%2CB06XTZYJL3%2CB074GYNJ85%2CB07YXSX7K8%2CB01M58DARW%2CB07X3GR2SD%2CB081DTRC46%2CB06XPM34X8&srpt=VEHICLE_ACCENT_LIGHT
2 Nilight 18 watt:www.amazon.com/Nilight-60001F-B-Flood-Driving-Warranty/dp/B00IY3YLCI/ref=sr_1_6?crid=85AT9WMITM1M&keywords=nilight+led+lights&qid=1638171932&qsid=130-1248870-4279226&s=automotive&sprefix=nilight%2Cautomotive%2C173&sr=1-6&sres=B06XPHPMQ4%2CB06XQGQTXQ%2CB00IY3YLCI%2CB07ZLWJZLT%2CB082F4W617%2CB07SFG7GN9%2CB07PWLZDNH%2CB012CGFOOQ%2CB081Q1ZVN6%2CB01KRV3PNA%2CB07Y1FYYWM%2CB07D5S1SF5%2CB00G620ZVU%2CB06XTZYJL3%2CB074GYNJ85%2CB07YXSX7K8%2CB01M58DARW%2CB07X3GR2SD%2CB081DTRC46%2CB06XPM34X8&srpt=VEHICLE_ACCENT_LIGHT
2 Nilight 42 watt:www.amazon.com/dp/B08BFZN88K?pd_rd_i=B08BFZN88K&pd_rd_w=hCzgH&pf_rd_p=7ea8e9d0-fed1-49e8-a002-f2d3f5cb151d&pd_rd_wg=FabQH&pf_rd_r=FN6ET1Y868ZK45QVF93X&pd_rd_r=19f5b077-f712-402c-97f6-d4d7d90bab0e
Military pay? Bum.
@@claytonwhitman2611 just now seeing this! Thank you so much man!! I ran a pair and still going strong! 🤙🏼
@@SzymczykProductions GOYLA, SFMF!
i have ran at least 10 cheap led light bars, only had 1 die, then one other had some lights burn out. i still have not even close spent as much on all the lights as one high end light bar would have cost. Nice install
I have the 39" Nilight on my Maverick and it's great for the 80 or so bucks I spent.
Hard to beat the value. They probably won’t win any brightness awards, but they’re not 600 bucks either! -Joe
I have a 24inch nilight light bar on my explorers pushguard. Pretty happy with it and the warenty
Good job ,I run 2 32 inch nilight light bars on my tractor and love them..
I like cheaper lights ive had a 24 inch on my truck for about 6 years now its half filled with water but the damn thing still works great. Now im looking for a 40 for my general. Nice install btw.
Sometimes the juice isn’t worth the squeeze. I have found that over the years you get what you pay and with that being said, I try to purchase the lights with the price point in the middle. If I was able to ride everyday and needed the more expensive and trustworthy option, then primo lights would be the choice. Thanks for the video.
I totally agree, but we have run many of these Nilight bars and all of them have held up with zero issues. 👍 -Garrett
@@DerangedOffRoad I’ll definitely have to check these out. Thanks and POR (press on regardless), when it comes to SXS adventures
Hell I bought a set of Rigid Industries 4" square pod lights with "Hyper Spot" beam, and I could barely pay for them!!!! $315 bucks for those damn things! Yeah they are bright, with a super tight focused beam, almost to tight, kinda like a LEP Flashlight beam! You have to slightly join the two beams together, because if you don't, you see a spot light on the left, and a spot light on the right! Join them side by side gives you the best throw and visual. So needless to say, there's no way I could afford a 52" Rigid Industries light bar! Their stupid expensive!!! That's why I'm running a 22" AuxBeam in the bottom slot of my bumper on my 2011 Sierra, and I'm fixing to buy a 52" NiLight roof mount light bar.
Oh believe me, i'd much rather have a Rigid light bar but that will never happen!
Thanks for sharing but I’m looking for green & white so it can be green to supporting night hunting! Still searching and again thanks for sharing!
Have you looked into the Seizmik Night Persuit lighted mirrors? That's the only green lights I've ever seen. seizmik.com/pursuit-night-vision-series-side-view-mirrors/
Relay do you have to screw to metal?
Nice video 👍
Thanks for always watching! -Garrett
Deranged Off-Road You bet..
Hopefully have some good YXZ stuff soon as well.
Deranged Off-Road They are great machines!
I'd say that's good enough for a 125 dollar light bar from amazon... not cree bulbs, but they handle the dark...
Exactly and most don’t need anything more.
Budget, don't ride at night often.
With that 52" light bar it's a 783W and the 12awg wire harness states a 450w max. Which harness do you have in this video ?
I was questioning the same thing. Any luck with an answer?
@@Mightys_adventure I ended up going with the 42" (52 didn't fit) but used the same wire harness and have had no issues. I can't remember the wattage on the 42" but nilight told me I'd be fine with either light bar.
What does the relay do for you if your running your lights off auxiliary power?
Did anyone notice that at 9:40 only one light pod in the rear is working?
It was a simple wiring fix after. 👍
Haha! Come on man! Why you gotta point out my flaws? 😜 crappy wiring connection. Fixed it when I got back. -Joe
Where did you run your wires from the light bar and the rear pods to get them down into the dash.
Can the Ranger handle generating enough power to have your regular headlights on, your stereo going, 4 light pods and the light-bar on all at the same time?
Yes shouldn’t be a problem. We run all that on both the Rangers minus two pods and it works great. -Garrett
My buddy has a 2017 Ranger running stereo, 52" light bar, and 4 pods. Has all the power they need
What are the side pod mounting brackets? Where can I get a pair?
Any noise when it’s on the trailer towing it
No, just make sure the angel is right.
With the bracket does that work if you have doors?
If you have doors you will want to mount elsewhere.
Will this fit a 2016 Polaris Ranger 570? Same placement as video
I believe the cage is the same.
How is that 52" LED working now? Still going strong?
Yep these light bars work great for the price. 👍
@@DerangedOffRoad thank you!
Yep, I had one on my Teryx4 when I sold it and it was going strong still after three years.
@@DerangedOffRoad gonna pick up one this month.
What kind of roof top is that you have?
Just a stock OEM one.
How did you ran the back wires for the back pods to the front ?
Top of the cage between the roof, it hides them really well. We also put the wires in a black sleeve first.
I bought a cheap ass Amazon 40" double row and it's literally brighter than. My friends 40" e series rigid. Mine $75 his $1800 🤣 just fkin insane
And at the end of the day if it stops working you’re out $75 bucks and can just buy another. -Garrett
@@DerangedOffRoad amen to that!
For $100 they probably going to last longer than my vehicle
The music in the back ground is annoying
Any update on the light bar?
Still working great no issues. We have had like three of these light bars and no issues from any of them. 👍
@@DerangedOffRoad thanks for the update!
@@DerangedOffRoad what is the width from bolt hole to bolt hole on the brackets? Trying to use existing holes on my cab.
Can’t remember on this machine but it’s a 52” curved light bar.
@@DerangedOffRoad ok. I’m doing some research seems like some are not true to size. Thanks!