Nerf Ultra Pharaoh Mod Guide !
Вставка
- Опубліковано 29 сер 2024
- This time we have a look at modding the Ultra Pharaoh.
Check out the new page on Patreon !
/ projectnerf
Contact us at
Project.Nerf.2.0@Gmail.com
Check us out on Facebook
/ project-nerf-262678711...
Check out the shop
www.etsy.com/s...
Fan Mail Address
Project Nerf
1914 Coleman Ln.
Fredericksburg, Va. 22407
Thank you for the guide. I put in a 18kg spring, took out the ar, and removed the bolt and mag release locks on mine with your guide. Havent tested fps with ultra accustrikes yet but noticed less of a muzzle drop already!
Seized up my pharoh with a pretty rough double feed (intentional stoppage to test something), had to break it down to unjam it, and this video helped a lot. Also decided to remove air restrictor and locks while I was at it, cause why not, I've already got it broken down. It works great now, thanks for the video.
You are very welcome my friend! 😊
Thank you very much for the info on the locks I got to take out. It totally passed my mind. Awesome 😎👍
Glad I could help!
Broke my Pharaoh a while ago and I'm gonna try to fix it eventually, hopefully this guide helps.
same here brotha
Me too.
I might get one and rebarrel it for standard darts with a brass breech
That would be sweet, send me a video of it firing , if you build it. Much love........................ Chris
Sweet!
Thanks for sharing this with us!
Awesome video as per usual 👍
As always , I appreciate your support. Much love............................. Chris
Great mod man, thanks for sharing with us all.
No problem 👍, I appreciate your support my friend, thanks....................................... Chris
@@projectnerf7920 i just bought one of these the other day. I wondered on the lock removal. Very helpfull guide .
I just want to make the scope lift up abit more, or a new iron sight for it
Advanced Merry Christmas Project Nerf :D
Happy holidays, my friend, I hope that you and your family are both safe and well.................... Chris
@@projectnerf7920 same thing to you and your family as well
Doing my best my friend, I'm an " Essentail Worker " so I'm at a bit higher risk, but I'm taking every precaution. Much love.............................. Chris
Any idea where to get a replacement for the large white gear that you take off at the 3:45 mark in the video?
I tried a few for someone else and couldn't find any that were quite right. I looked at gears from a Apollo , Helios and a mega Centurion and came up with nothing that would work.
Pls do dinosquad Rex rampage
That’s insane! Thanks
Last time I had a Nerf gun was far more years ago than I'd like to admit. Just got one of these and have been looking for extra magazines. Do they even exist?
Seems strange to sell a blaster with an extra mag storage slot in the stock and not have extra mags for purchase.
Great vid. Will be opening mine up soon!
I haven’t heard anything about it myself, but sadly, I’m not quite as “ in the know “ as I probably should be. There may be a 3D printed option out there , might be worth taking a look that direction.
@@projectnerf7920 No worries, cheers for the reply. Found a couple of conversion kits but no mags as of yet. Fingers crossed, otherwise may try printing something myself.
wouldn't you want to fill the plunger head?
@@Sypher474 yeah I’m in the same situation as you two years later lol, still no mags. Makes no goddamn sense why they have a storage slot in the stock and never sold another one
@@TazyBabyloose research but I think they canned the ultra because no point in another proprietary weapon system with ammo that doesn’t work well so support was discontinued. Wonder if mega/rival still going?
Found a pharaoh for $7 but now need ammo…and a extra mag.
Thank you.
You're welcome!
I need to make sure when I mode this gun will it be more accurate can anyone tell me please
Have you considered the worker short dart conversion kit for the ultra pharaoh?
I installed one and painted up the blaster in a later video.
Do you need to trim or cut the left body shell after installing the metal kit?
Hello project nerf. I need help on assembling back my pharaoh please 🥺
Would like to see thing modded with the worker kit for short darts
I have that kit, and will do an install video as soon as I get the new shop set up.
Hey man I'm working on mine now. I came across a spring sitting in the shell. It's really small and only like 4 coils but has 2 little ends coming out from it. It kinda looks like an alien head with antennas. Can't for the life of me figure out where it came from. Any help would be appreciated
Its the spring for the ratcheting piece when you prime. 2 antemanna go on each side of a plastic bit so the ratcheting piece goes back to position as it goes over the teeth.
Hi I know that you are a friends of PDK flims
great mod!
Thank you my friend !
My magazine clips is stuck and so is the bolt thingy and I can’t get it out. Please help, I’m suffering right now
There is a jam release button on the side if you haven’t tried it yet. Failing that you may have to open it up to get it free, without damaging anything by trying to force it.
Thinking i might get one now
Go for it my friend, if nothing else, it’s a great looking blaster with mod potential.
Shame most of the actual action happened off camera :(
Hello, I was rewatching your video on your Stryfe package from PDK films. I've been looking into single / two stage trigger or how ever it is called. Tutorials for this combining, both actions into one. I've been looking on your channel and various places but with out any luck in trying to find such videos. By any chance have you created or will create a tutorial for this procedure in the future. Thank you for any help.
I haven’t done a two stage setup with the large micro switches, but if you remove the mechanical trigger lock. You would have the capability to run the blaster just from the main trigger. If you were gonna run lipo, use a mosfet and keep your stock switches.
@@projectnerf7920 Thank you for the reply, it's something to think about. In putting together ideas for a build, trying to cover all the basis so I can have something to work from if needed and a two stage trigger would be a n easier option than worrying about a rev trigger on it's own. Thank you again for the reply and the information.
You are very welcome my friend........................... Chris
So I opened my nerf blaster and the plunger tube is separated from the breach that goes round the dart any recommendations on repairing I’m so upset 😢
Send me a picture to my regular email. Project.Nerf.2.0@gmail.com
Hi I really need help got my ultra pharaoh and I’ve had it for a while and it primes ok but there’s not enough air to fire the dart I really hope it’s not broken I’m really upset because I only dry fired a couple of times at the end of the magazine please help I don’t mod and I’m really upset 😢
Contact the NERF company and deliver to the nearest NERF or Shop that sells nerf guns and ask them to Ship it to the nearest NERF shop.
So my son’s bolt broke and I know a few others where just snaps off. We repaired the bolt but we had take the gun apart to do this... while we took it apart I figured I would remove the trigger locks. But now the gun doesn’t fire the darts as far. Do you have any re commendations?
Sounds like the dart door may not be opening all the way. Double check how your gears are set. If your even one tooth too far back. The bolt won’t go forward enough to fully drop the dart tooth and allow the dart gate tidily open.
@@projectnerf7920 whats the best way to ensure all the gears and teeth are set correctly?
When you re-assemble, just make sure that the bolt is all the way forward, I like to hold mine as far up as it will go, then put the large master gear back in.
@@projectnerf7920 ok. We did that. It was working great afterwards. But then my son broke the bolt off again. But we’ve had three neighborhood kids break their bolt in the same spot on this model. Seems like a poor design for the bolt.
@@Gabrielsermeno , we had the exact same problem, with the bolt breaking. What did you do for a replacement?
May I ask what the purpose of removing all the locks is?
Sure, removing the locks helps the blaster to run smoother and faster, as well as allows you to do things like de-prime it.
@@projectnerf7920 hmm, cool
I know it’s a wild question but you seem to know your stuff about nodding and I had another question.
Would it be possible to put the Vulcan chain mechanism into a titan and up the fire rate to make an actual dart mini gun?
The titan is quite large, so I would say yes it could be done. I'm sure it would be a ton of work, but that's the name of the game, right.
@@projectnerf7920 damn true, well I’m gonna do it mark my words!
Go for it!!! I think it would be a great mod.
Does the ultra pharaoh fit other magazines?
Not without an adapter made specifically for the Ultra mag well.
Pls do a full auto mod of AF spectrum and rebel mech
Was thinking of doing the spectrum, might just have to now ;)
@@projectnerf7920 cool!
Anyway stay safe
Where can I get springs and stuff for this mod
Outofdarts.com