Hello, excellent review Please answer. I have Panasonic camera GX8. Can I control Canon TTL flashes only with X PRO-o Olympus controler ? If I can, would I have full TTL functionality or just manual? I have two great Shanny flashes for Canon I would like to not change them for specific Panasonic flashes. Thank you
Hi there, I recently purchased the flashpoint r2 pro and a R2 receiver. Upon testing the units I noticed that on highspeed sync my photos are coming out under exposed, even though I'm using the correct exposure. However when I shoot the same shot with the flash attached to the camera on highspeed sync the results are quite accurate. Do you have any suggestions? Thank you for your time and great job with the vid.
Excellent video. Made setting up this transmitter so easy. Tried to follow the instructions that came with the unit, but was too hard to read and follow. Thanks
Can I only use 1 channel at a time? For example, can I have one speed lite on Group A Ch 7, and a speed lite on Group B Ch 3? Is this possible with this transmitter?
I bought this trigger Godox XPro-C for my Canon 5D Mark III, my speedlite Canon 430EX II but I can't get it work wirelessly. Is there anything I am doing wrong? Please kindly help.
My Godox X-Pro does not allow me to use the 2nd curtain sync on Canon 700D (Rebel T5i). I am not able to enter the camera menu “biult-in flash settings” when the trigger is attached. Does anybody know how to solve that?
Can someone please show how to connect the Ad200 to the godox xpro? On the same group, same channel and no communication. Any help would be greatly appreciated.
Can we change the power up and down in full stops (the xpro1 only provides 0.1 or 1/3 increments, as far as I could figure out) that would be very helpful
Can I ask with a-e. If for example your one channel say ch2. With the a-e and they are different powers if you would like one choose 4th power in group A then group be would B would 2nd power and c would be full power as set in advance. If they are all on channel 2. Would it just be a matter of selecting a b or c if already prepared in advanced?
Great video! Can you share why you would use TTL versus Manual? Also, how do I change exposure compensation in TTL so that it also shows on my Godox flash?
Hi! The TTL vs Manual comparison is on my list of future videos. May I suggest this other video in the mean time? It shows TCM, in which you can start shooting in TTL and then convert to Manual: ua-cam.com/video/ehS6lUE-YiI/v-deo.html
TTL- the exposure will be automatically calculated and set by the camera, though you can override a little, Manual, you have to do it the calculation and adjustment yourself...
hola tengo transmisor y flash neewer en mi canon 80d pero solo funcionan por el lente visor y no por la pantalla táctil, sabrías que podría hacer. gracias
Hi! The 430EX will not understand the radio signals coming from the XPro-o. However, you could place the 430EX on a X1R-c receiver. You can see a similar setup in this video: ua-cam.com/video/14CgqZpFJZE/v-deo.html
Even though the EL-1 has radio capabilities, it's not compatible with the Godox radio system. In order to control and fire the EL-1 remotely, you need Canon's ST-E3-RT transmitter, or something compatible like the Phottix Laso transmitter
That really sucks that they need alkaline batteries. Should have given it a LI-Ion battery if you can't use rechargeable. I've bought some expensive LADDA rechargeable batteries which I'm hoping will be fine.
I have s godox x2t, instead. Having a problem getting it to fire my tt600. Settings match on both units - both on A, manual mode, channel 3, 1/128 shutter speed. I'm using a Nikon D850. Maybe my camera settings are incorrect? Would you help me, please?
probably you figured it its been 4 months but i just changed my channel from 3 to 1 and my godoxad600 fired. My xt1 was only firing intermittently so i got this pro version for my Sonya7rmrk4 and left the XT1 for my other sonys which work fine
@@darryl_andrew thanks for responding. I have had 4 different units. Only 1 worked right out of the box, for about 2 months. I start at channel 32, then proceed down towards 1, looking for a channel that works. No luck so far. I contacted Godox, and their solution is to have me share a video of the unit not working. I purchased a cable until I get it to work the way it's supposed to, if that ever happens.
@@alexsilva_co i chose to buy a cable that links my camera to the godox x2tn. Tired of returning units and the new units not working either. Thanks for asking.
Dude, you didn’t explain anything about how to connect the various flash units to the transmitter, you never explained what groups and channels are for and how they relate to connecting and controlling various flash units at different power settings…
Not really a set up tutorial. A set up tutorial would show how to set up this unit working with a godox flash light. Pairing them and running them together. Now that would have been a setup video. This just shows the interface in the trigger.
Would have been a useful tutorial if it showed how to actually use it with an off camera flash
Dawg that’s why I hate that UA-cam removed dislikes cause this wasn’t helpful at all
Did you read the title.
The set up menu he was referring to didn't even come up for me. Let alone syncing with my V1 flash, channel selection etc etc😄
Wow, stil have no idea how to trigger my Godox flash with this unit.
Very interesting and useful tutorials. I just received 3 TT600 and this trigger. Your videos have me up and running in only a few minutes. Thanks.
Thanks for posting. Waiting for my V1's and transmitter to come in.
Just picked up the X Pro C and an AD200 Pro. This was very helpful. Thanks!
Thanks for the info on batteries, was wondering why my level wasn't showing as full
So many unanswered questions: Why a preference for CH9 & 16? How to sync w/GODOX flash?
Simple, clear and straightforward!
Hello, excellent review
Please answer. I have Panasonic camera GX8. Can I control Canon TTL flashes only with X PRO-o Olympus controler ? If I can, would I have full TTL functionality or just manual?
I have two great Shanny flashes for Canon I would like to not change them for specific Panasonic flashes.
Thank you
Thanks man, you saved me today lol..
Hi there, I recently purchased the flashpoint r2 pro and a R2 receiver. Upon testing the units I noticed that on highspeed sync my photos are coming out under exposed, even though I'm using the correct exposure. However when I shoot the same shot with the flash attached to the camera on highspeed sync the results are quite accurate. Do you have any suggestions?
Thank you for your time and great job with the vid.
Excellent video. Made setting up this transmitter so easy. Tried to follow the instructions that came with the unit, but was too hard to read and follow. Thanks
Great to hear!
you did good but I can't figure how to change from TTL to Manual?
you did a great job explaining!
Thank you!
Well explained sir. Thank you so much......
The LCD display is only showing Single Group, how I can change it to see a Multiple Group display? Thanks!
Please do more videos using Xpro and Godox V1. Thank you!
Thanks! As soon as I get my hands on a V1 ;-)
Very helpful. Thank you.
Great video. I tried to sync the R2 transmitter to my eVOLV 200 R2 flash, both on Group A, CH1 TTL. It didn't fire. Any suggestions? Thank you.
I would like to know if this is also compatible with Nikon z6?
how do i get the transmitter to connect to my flash? i can't seem to connect them
Simple and clear , thanks buddy
Thanks for the video sir, good stuff 🙏
can you use this other brand transmitters on different camera bodies?
Hey Alex do you know if the Godox Xpro-N trigger can work with a Flashpoint R2 lll flash?
Can I only use 1 channel at a time? For example, can I have one speed lite on Group A Ch 7, and a speed lite on Group B Ch 3? Is this possible with this transmitter?
My trigger works fine with my AD100 PRO, but inconsistent with my V1N. Can't figure out why.
MAHALO, Alex!!! Great video and information! Keepʻum coming!
Help! My screen doesn’t show M for manual by group A. It only shows ON. I am so confused.
Excellent guruji
I bought this trigger Godox XPro-C for my Canon 5D Mark III, my speedlite Canon 430EX II but I can't get it work wirelessly. Is there anything I am doing wrong? Please kindly help.
Why my godox xproc cant fire or control 2 flashes. Only single flash at a time im using V1 and TT600.
My Godox X-Pro does not allow me to use the 2nd curtain sync on Canon 700D (Rebel T5i). I am not able to enter the camera menu “biult-in flash settings” when the trigger is attached. Does anybody know how to solve that?
Nicely explained! Thank you!
Glad you enjoyed it!
Can someone please show how to connect the Ad200 to the godox xpro? On the same group, same channel and no communication. Any help would be greatly appreciated.
Can we change the power up and down in full stops (the xpro1 only provides 0.1 or 1/3 increments, as far as I could figure out) that would be very helpful
great video - thanks!
You are welcome!
I have the R2pro, I can't Get the group D and E to TTL mode, only A,B,C , why is that ??
Can I ask with a-e. If for example your one channel say ch2. With the a-e and they are different powers if you would like one choose 4th power in group A then group be would B would 2nd power and c would be full power as set in advance. If they are all on channel 2. Would it just be a matter of selecting a b or c if already prepared in advanced?
Great video! Can you share why you would use TTL versus Manual? Also, how do I change exposure compensation in TTL so that it also shows on my Godox flash?
Hi! The TTL vs Manual comparison is on my list of future videos. May I suggest this other video in the mean time? It shows TCM, in which you can start shooting in TTL and then convert to Manual: ua-cam.com/video/ehS6lUE-YiI/v-deo.html
TTL- the exposure will be automatically calculated and set by the camera, though you can override a little, Manual, you have to do it the calculation and adjustment yourself...
hola tengo transmisor y flash neewer en mi canon 80d pero solo funcionan por el lente visor y no por la pantalla táctil, sabrías que podría hacer. gracias
I just bought this and noticed the when i turn it on all i see is the blue screen. After about 5 minutes or so i see the display..Is this normal?
I have a canon 470EX-A1 speed light and I cannot for the life of me find out how to connect this and fire the flash wirelessly
It didn't help me. You didn't tell and explain how to connect the flashes to the trigger?
Why you like chanel 9 than 1?
Curius 😁
This would help a lot, can this Xpro Transmitter Be synced to Neewer Vision 4?
I don't have access to a Vision 4 but, based on a quick google search, I don't think it will work.
how can i set in high speed?
Question...I have a 430ex rtiii. How do I use it with the godoxpro-o installed on a lumix s1?
Hi! The 430EX will not understand the radio signals coming from the XPro-o. However, you could place the 430EX on a X1R-c receiver. You can see a similar setup in this video: ua-cam.com/video/14CgqZpFJZE/v-deo.html
Will the xpro-o work with x1r-c/n/s?
Yes, I actually tested the X1R-n with this transmitter :-)
Will it work well with Hasselblad X1D?
It works with 907x (The Nikon version)
I'd rather change the settings for the flash in camera than in the transmitter. The settings in camera also overrun the transmitter
I thought this was about setting up the unit??
Do Godox - have TCM ⁉️... if so - Video Please ❗😃
Hi there! I think this is what you asked for :-) ua-cam.com/video/ehS6lUE-YiI/v-deo.html
@@alexsilva_co Thank You 😃❗👍 it's EXACTLY what I was hoping for...and even a little more
Has anyone tried using this with the canon EL-1?
Even though the EL-1 has radio capabilities, it's not compatible with the Godox radio system.
In order to control and fire the EL-1 remotely, you need Canon's ST-E3-RT transmitter, or something compatible like the Phottix Laso transmitter
That really sucks that they need alkaline batteries. Should have given it a LI-Ion battery if you can't use rechargeable. I've bought some expensive LADDA rechargeable batteries which I'm hoping will be fine.
Has not covered all the buttons
I have s godox x2t, instead. Having a problem getting it to fire my tt600. Settings match on both units - both on A, manual mode, channel 3, 1/128 shutter speed. I'm using a Nikon D850.
Maybe my camera settings are incorrect? Would you help me, please?
probably you figured it its been 4 months but i just changed my channel from 3 to 1 and my godoxad600 fired. My xt1 was only firing intermittently so i got this pro version for my Sonya7rmrk4 and left the XT1 for my other sonys which work fine
@@darryl_andrew thanks for responding. I have had 4 different units. Only 1 worked right out of the box, for about 2 months.
I start at channel 32, then proceed down towards 1, looking for a channel that works. No luck so far.
I contacted Godox, and their solution is to have me share a video of the unit not working.
I purchased a cable until I get it to work the way it's supposed to, if that ever happens.
Hi Dennis! It's been a long time but, did you manage to get your gear working?
@@alexsilva_co i chose to buy a cable that links my camera to the godox x2tn. Tired of returning units and the new units not working either. Thanks for asking.
Dude, you didn’t explain anything about how to connect the various flash units to the transmitter, you never explained what groups and channels are for and how they relate to connecting and controlling various flash units at different power settings…
Not really a set up tutorial. A set up tutorial would show how to set up this unit working with a godox flash light. Pairing them and running them together. Now that would have been a setup video. This just shows the interface in the trigger.
Tutorial rating:
Terrible.
No setup instructions or walkthroughs
Got bored so gave up
Not helpful
What's wrong with your voice man?