I find it odd how some bells go up wrong. Maidstone tenor is one example. They have a special home made device attached to a rope to swing the clapper over.
I guess it's a case of the physics of the swing of the clapper vs the swing time of the bell, together with techinique of the ringer to slightly check the bell at the start of ringing up to ensure the bell goes up right. Either can cause bells to go up wrong. The old wrought iron clappers at Grantham required two ringers on the 11th (9th as it was) and three on the 12th (10th as it was) to get them up right, the newer nylon and wooden shafted clappers just need one.
@@DavidBraunton well you're certainly right about checking the bell I suppose if you were a Devon call changing ringer where they have about 4 on the tenor you would probably let Liverpool tenor to go up right. I think perhaps 4 would struggle on that bemoth of a bell
@@kirchenglockentv it's not that common, I believe it tends to be Catholic churches, and where the bells are rung by motors, rather than humans. The Catholic Cathedral in Liverpool does.
The bell swinging across has nylon shafted clapper, no counterweight, the bell ahead has a wooden shafted clapper. The reason the first bell to ring is 'going up right' is I had my full body weight to check it at the start, the second bell is being swung one handed and without being able to check it at the start.
There's something wrong with one of your clappers, they're not striking the bell properly like swinging back and forth that could be an issue right there and that gotta be fixed at some point.
@orionharmon6017 the clapper that isn't swinging fully, just means the bell wasn't pulled down hard enough at the start causing it to not do what it is meant to
I can see you made a mixed capacity so the 9th bell (also known as the second tenor) rings wrong. It can be ringing and ending up wrong if not checked at the bottom so I see the clapper balanced wrong on second tenor
On this video, made during Covid, I was alone ringing both bells together; that meant whilst I could use both arms to get the tenor started (12th bell), when it came to the 11th I could only ring it with one arm which doesn't apply enough force to the clapper to go up right. I hope that makes sense.
Sort of. The other bell being rung is the 11th, and the clapper isn't going to the top of the bell like it should as it was "got up wrong", which is where the ringer didn't pull down backstroke quickly so it chimes properly. This issue effects big bells, and is fixed by knocking the clapper over to the thet side of the bell whilst up so it rests kn the correct side
In order to get the bells with flying clappers (hitting the upper edge), rather than the bell hitting the clapper, you need to apply force to check the bell and hence get the clapper hitting the upper edge. At the time of the video, only one person was allowed ringing, so I had to ring both bells on my own; I'm not strong enough to check the second bell with only one hand and also whilst still swinging the first bell with my other hand this takes away how much force I could apply on my own.
I love how you christmas decorations on the bells
The "continental" ringing is very beautiful, it's good to do change ringing and this, sometimes, I think.
I like continental ringing style the most
@@vintagesimplexfirealarmsof6440 ive just done a continental ring vid on my channel
@@kyletheringer which one is it
@@vintagesimplexfirealarmsof6440 ua-cam.com/video/aqTBsJr_rXI/v-deo.html
1:35 so ya don’t have to wait
thanks for the tip and merry christmas! 🖖🎅🎄🎁✨
2:35 for the eleventh
This feels like a holy moment !!!
Thank you lord
Joy to the world
Wonderful continental ringing..... It should be used more often
Beautiful!
Can't believe these are heavier than the cathedral. Lincolns 25cwt in D.
I find it odd how some bells go up wrong.
Maidstone tenor is one example.
They have a special home made device attached to a rope to swing the clapper over.
I guess it's a case of the physics of the swing of the clapper vs the swing time of the bell, together with techinique of the ringer to slightly check the bell at the start of ringing up to ensure the bell goes up right. Either can cause bells to go up wrong. The old wrought iron clappers at Grantham required two ringers on the 11th (9th as it was) and three on the 12th (10th as it was) to get them up right, the newer nylon and wooden shafted clappers just need one.
@@DavidBraunton well you're certainly right about checking the bell
I suppose if you were a Devon call changing ringer where they have about 4 on the tenor you would probably let Liverpool tenor to go up right.
I think perhaps 4 would struggle on that bemoth of a bell
@@DavidBraunton the 11 went up wrong
@@DavidBrauntonDo you have churches in the UK where its normal to Ring the Bells in european Style?
@@kirchenglockentv it's not that common, I believe it tends to be Catholic churches, and where the bells are rung by motors, rather than humans. The Catholic Cathedral in Liverpool does.
i love the sound ❤❤❤🔔is bountiful sound❤❤😊😊😊
Bell 1 has a counterbalanced clapper whereas bell 2 has a falling clapper. Am I correct?
The bell swinging across has nylon shafted clapper, no counterweight, the bell ahead has a wooden shafted clapper. The reason the first bell to ring is 'going up right' is I had my full body weight to check it at the start, the second bell is being swung one handed and without being able to check it at the start.
ua-cam.com/video/NKjapSPJX68/v-deo.html in this video both bells are up right, hopefully you can see neither clapper is counter balanced.
@@DavidBraunton Interesting! Thank you very much for the details.
Yes you are right
Wow 🤩🤩🤩🤩🤩🤩
They are ringing church here in Europe uk
They are ringing church here in the Europe uk 🇬🇧
I like this ringing style and is it rare for a English church to do this style of bell ringing
No it's still the normal English bell set up but thay have not been rung up fully.
Will the other bells get wooden shafted clappers? Also what is the hammer on the 11th used for? Happy New Year's!
Happy New Year, unlikely on the wooden clappers at present. The other hammer will be the clock hammer
@@DavidBraunton What bells have the hammers?
@@JesusTilapia 6, 7, 8, 11 & 12
Do they use Westminster chimes
There's something wrong with one of your clappers, they're not striking the bell properly like swinging back and forth that could be an issue right there and that gotta be fixed at some point.
Normally you wouldn't ring both bells single handedly, you can then use your full body weight to get the clapper to strike the upper side of the bell.
@@DavidBraunton Hmm makes sense to me 🤷🏽♂️💁🏽♂️
@orionharmon6017 the clapper that isn't swinging fully, just means the bell wasn't pulled down hard enough at the start causing it to not do what it is meant to
@@kaidenmccreath4269 Right!
@orionharmon6017 do you get it now? If not I can try and explain better
I can see you made a mixed capacity so the 9th bell (also known as the second tenor) rings wrong. It can be ringing and ending up wrong if not checked at the bottom so I see the clapper balanced wrong on second tenor
On this video, made during Covid, I was alone ringing both bells together; that meant whilst I could use both arms to get the tenor started (12th bell), when it came to the 11th I could only ring it with one arm which doesn't apply enough force to the clapper to go up right. I hope that makes sense.
@ oh alright then that can make sense since I saw a video of you ringing in the rope section
Cool
bro used a bell as a tripod💀
They are ringing church in Europe
St Wulfram's Church Grantham. www.stwulframs.org.uk/
It is sort of weird the temor clapper only goes to where it is swinging to.
Sort of. The other bell being rung is the 11th, and the clapper isn't going to the top of the bell like it should as it was "got up wrong", which is where the ringer didn't pull down backstroke quickly so it chimes properly. This issue effects big bells, and is fixed by knocking the clapper over to the thet side of the bell whilst up so it rests kn the correct side
Why is one of the tenors clappers a falling clapper
In order to get the bells with flying clappers (hitting the upper edge), rather than the bell hitting the clapper, you need to apply force to check the bell and hence get the clapper hitting the upper edge. At the time of the video, only one person was allowed ringing, so I had to ring both bells on my own; I'm not strong enough to check the second bell with only one hand and also whilst still swinging the first bell with my other hand this takes away how much force I could apply on my own.
So both have flying clappers but since you had to ring both at the same time you couldn’t swing the bell hard enough so the clapper would fly
@@KaileenO817 yeah, individually I can, but in combination, unlikely
St wulfram church bell in Europe 🇪🇺
If you want to see what happens in the ringing chamber, below, to make this happen: ua-cam.com/video/qzATEFyOM9I/v-deo.html
Let me wake up everyone 😁
Wehre it is
St Wulframs, Grantham, Lincolnshire, UK
Hi David!🤗
Morning Nicole
@@DavidBraunton Oh I changed my name to Libra
The bell on the left is 1.23 tones the bell on the right is 1.62 tones must of got that wrong
But the way the ropes fall is the other way around in the ringing chamber below.
Aok
I like bells with falling clapper and i have a homemade bell with falling clapper
Bro Put The Camera On A Bell 💀
@@NethulInduwara-ih5pk I can certainly try that, I'm guessing the result would make you feel quite dizzy though
Mi oiace la grande - Reb3
Ding
Yeah you got it
Actually a this also covid in my country in the philippines worldwide covid-19 whole world has covid-19 even america
7
Alain