INSANE Peak to Peak Low Frequency Excursion SMD v1 15" Subwoofer - 5000+ Watts at 10HZ!
Вставка
- Опубліковано 17 тра 2018
- Visit my site! www.SteveMeadeDesigns.com/board
Join the forum!
I had a ton of power on my test bench and i wanted to see how much the SMDv1 could take. Believe me i pushed this thing hard! If you are wondering why the 8800.1 (8800 watts at 1ohm) only did 5250 watts, please observe the live reading on the SMD AMM-1. At right around 1.9ohms, it is right on par with it's 4840 2 ohm rating.
Check out how the 8800.1 did on the amp dyno here: www.stevemeadedesigns.com/boa...
Soundigital's website here: www.soundigitalusa.com
Support these video's! - / meade916
SMD Products here: www.wcCarAudio.com , Amazon, Ebay and more!
Also, check out my other pages:
Instagram: / meade916
Facebook Page here:
/ smd-steve-me. .
Follow: / meade916
Visit SMD Partner Sonic Electronix at www.sonicelectronix.com - Авто та транспорт
Keep in mind, it is a 3500w RMS subwoofer...preferably in a box with some suspension assistance haha! It's also 6 years old....used to be in my ISF before i replaced it with a v2. Peep the ISF playlist here ua-cam.com/play/PL5E1A158823898EAE.html
meade916 I want to buy it or a nice set of 12s from you please , been following since you did the builds in your backyard and busting the civic window out to tint it lol
Wat up my name is Chris I have a 89 Chevy s10 how much you charge to make door pod for Component speakers that I can put on my door panel
Nice
Got 4 of those laying around? I wanna do a 4th order push pull in a mini van.
meade916 , been a fan since 2012' keep me drooling over the goodies it is impossible to find in Alaska, anyway excellent sh!t
The test-bench has certainly seen some upgrades throughout the years! Keep it up Steve
The strength of that spider is incredible! Such a piece of art.
It genuinely made my day to see one of your classics out again
That shit gotta be built tough as hell. That shit throwin in and out to an immediate stop.
That head on shot is awesome, very hypnotic with your logo haha, now i want one of those SMD Cannons**
I love that slo-mo...really shows what that woofer is doing under that much power. Great video as always Steve!!
Very clean movement, all the way to the surround. :-)
anyone recognize this sub? It is the original 15" V1 sub from the Lexus ISF build (before i put the v2 in later). If you peep my Lexus ISF build playlist on my main YT channel page you can see the entire build from scratch! thanks for watching!
meade916 what ohm load are you testing with....its amazing
I know wish it wash mine in my Tahoe
Is those sub ascendant audio mayhem
sorry, let me check the title of this video and even the actual words in the comment you are replying to so i can see what kind of sub it is. Yup, it's up there in bold letters. SMH some people hahah
1ohm but with rise it's almost 2
Dude what a beast!
We all need one
Worlds #1 shop nugget 😂 great work Brandon 🤘😎 Good help is hard to find these days.
I love Anthony's music.
spectacular your constructions from uruguay
Ŵow killing it . That woffer can do serious damage 💔 to a vehicle good lord . That is greatness .dont see this every day, but man, I sure wish i could have picked up 2 those back when . Thanks for the video, steve . Always a pleasure 🙏
4:46 HOLY SHIT
IKR😱
The motor control of the sub is simply fantastic!!!!!!!
William Price
Exactly right man. From a nerdy engineering standpoint they are fantastic to watch while knowing the parameters being thrown at it. You aren't going to see that on this level with very many subs at all.
Insane Bro! Love it! I'm also curious of the peak to peak displacement.
just seen one of these subs for sale on market place for 500$ so tempted to buy it now
"Sound like a gang a' elephants in tha' trunk!"
Lol
8500 watts free-air, that is seriously impressive.
You've made a huge mark on the 12 volt world Steve.
Keep it up man.
Holy shit bro.def.meade certified
I wish i had one of those subwoofers they are badass.
Nice! Like the vids steve. Fi
A carcaça desse falante é bem parecida com a do JBL Vulcano 3.8 . Esse aí tá com um ímã monstro hein . C é Loko
Your work is so clean and knowledgeable, thanks for your video, I like this type of speaker.
😱🔊🙉🔊 Very Strong Brother. Liiiiiiikkkkeee
I’d love to have this single sub in my car on a 8k amp, alternator with big 3, one fs battery in rear, fs crank battery, with a SMD custom built enclosure with a acrylic top with blue LED’s, and amp wrack made with acrylic also. Brooooooo… I’m saving up money now tho to get. Single 15” dead bonce machete, 1500.1, and I’m building my own box. I’m getting back into it. I’ve been out of the bass game for 7 years now. After being in the game for 25 years. Now that I’m married with kids I just can’t afford it like I used to could. But I’m hoping to buy one piece at a time until I get it all.
Nice!!
man brother great video man keep it up man
jesus these beats are getting more savage every video. big ups to antheny :D
Glad I can build those beasts. ; p
I need this
That shits moving son DAMN
Thanks for the great video.
Chugga chugga chugga, here comes the bass-train
The sexiest video i seen all year
Damn impressive
It's the Dr burn it up show
Big.. bass🔊🔊🔊🔊🔊🔊
4 am wake up video for work and AM beats brings another head bobbin beat..love the video Steve....
The suspension is obviously the limiting factor here. Split coil, dual motor, has extreme excursion capabilities that far exceed how far the surround can accommodate. I bet this with the new sundown Mega W surround would be great....
I remember I watched the whole build good stuff!
So i actually have a v1 thats signed by steve. I was trying to learn the best type of box to throw this in. Ive seen one other v1 mounted inverted in a box.
I build this subwoofer same but in 12 " 2.5 coil.double motors.
hi, it's awesome how the coil moves, how many whats RMS is the subwoofer, greetings from argentina
Helooo u n ur video so gud n something learning, and now m my 12"subwoofer to upgrade in ur video subwoofer like double kit and m making n ready coil for this subwoofer in 2 parts for 4ohms and 2ohms .
And how m snd a pic my upgrade subwoofer like ur subwoofer and will uh see .
💪Hard!! SMD
BEAST!! That spider though... what's the ticket on those SMD 15'$? I would love to build an enclosure and beat down the block with 2 of those
I dont know nothing about 1 oms or what you where doing to that woofer but what was that for tho
Nice, i got around box rise by wiring my subs to 0.5ohm. I did a test and most bass frequencys it plays it doesn’t go below 1ohm impedance. Im using a pioneer d9601 amp
what did you do the "test" with?
its extremely good, i dont like that it doesent have a high pass filter but thats not too bad. also do you notice when you adjust the bass knob the sub moves violently even with no music? i dont use the bass knob for this reason
Jorge Martinez thats interesting, oh welll. Im still gettimg the most out of the amp by having the gain set without the bass knob
i used a sig gen on my phone and confirmed that the output of the amp had a flat frequency response between 20 and 100Hz (using a voltmeter). i then turned my meter to amps and put it in series with the sub. i took readings of current at different frequency and thus calculated the impedance using ohms law. then i plotted an impedence frequency graph with this data on Microsoft excel. this shows the impedence peaks and dips well. my peak was at 36Hz
it would have been easier using your meter that is designed for this but i used what i had.
What pioneer head unit is at the model does anybody know where can somebody
What is the xmax and xmech on that thing? O_o
I have one of those but with one 2 stacked magnet its called MDS Dynamic XTR200015D1-MK2 SPL
Then you don't have one of these lol
beast
Damn thats a monster. Cant wait to get on your level boss
Muito top esse subwoofer
Nice wooper i wish that i have from Philippines tnx
Where or when can we buy one?
Whats the status of these subs, are they still available made to order or are they no longer being made?
Giant
I need this speaker
Đây là một niềm mơ ước của nhiều người thích cảm giác mạnh 👍👍👍
Muito toop podia ter aki no brasil
I know that's right., later on the big screen for sure... ! Thank you for the video.
Whats the name the track end of video?
Looks like that amp was doing a dam good job on that sub woofer, and it took all that power like it was nothing!!! Great video Steve!!!! 👍👍👍👍
I wish I could afford 1 of these MONSTERS!!!👈
I talk about ur show to all my friends and even people i dont i havw them lookn u up u are the god father. Of all subs an builds
Dang that's alot of flex can you do that on the v2 and v3
Heart Beat of the shop." It's alive It's moving It's ALIVE!"
Can it be used as a compressor for an engine?
What song is that at the end of the video
Thanks for another one, good shit
Nice,very Nice steve!!
Soundigital the best it’s like JL zapco power house of the Brazil market. Clean power
Price for your sound
Daaaym👍👍
How much brother?
Hifonics helios 4 channel amp can you dyno test one
The actual video starts at 3:26, the rest is timelapses and talking around it
Nice, music to my eyes!
Please price in speaker
I remember when I first saw the SMD v1. I was drooling and in love with the dual flux tech.. For the last few years Ive been traveling, hanging out in the SPL lanes and getting blasted by insane systems. My favorite subs are, Fi Sp4, Crossfire xsV2 (Spl or Non), DC Neo, EMF, Sundown, Skar DNR, and of course THE SMD (any version) is still on the list. I will own all my Favs. one day. I had the pleasure of getting a demo of one 15 on a CT sounds surfboard amp. I was impressed!! I can see it now I will be the old guy 60/70 years old still bumping out haha. Peace and Bass Bro :).
NAME MUSIC PLEASE
qual valor do woofer para o brazil quero dois
magnifico valeu top demais.valeu abraços.tmj.
That dude be cleaning the shit out of a subwoofer. Got the microfiber Poppin. Lol! Shit I'm the same way. God got it right when he gave us the microfiber towel. Lol
6:10 the cone has pauses at the top and bottom of the stroke. Is that clipping because the sinewave is squaring off?
no. There isn't any clipping in this video lol...the sub simply has no place left to go. The suspension was maxed out.
meade916 basically the same thing as clipping....
no. Not really.
@@samgibson1988 Yeah, it's the mechanical type of clipping
Things a fucking beast
💪💪💪💪💪💪 hell ya that sub DAM
Good evening, and the guy with the automotive sound.
Your subs are awesome Steve. I'm surprised a lot more people don't buy them. I still remember when you sent the 18in to EXO, he was so excited and he banged on that sub. If I had the money I know I'd buy a couple or 4. Can't wait to see the new CNC machine up and running. Another great vid by the way.
Jeff Froment he was so excited he traded it for something else SMH. Lol - and yes people buy SMD subs its a matter of Ascendant Audio never being able to make them in a timely manner. They are also expensive.
That’s a crazy sub for sure. It’s funny that my name is Brandon, and I’ve been called Brandito, Brando, never shop nugget though, haha. For awhile people just started calling me B.
How much it's cost reply
What instrumental is this ??
5:02 it sounds like a train.
lol
When you testing the 20k soundigital every one is still waiting
He had an issue with his amp, and had to send it back. He's waiting on his replacement.
When you gonna test the 100k soundigital???
How much one subwoofer price
Como llo consigo tu nunbero para acerté una pregunta
This is a better middle ground still moves a shit tonne but you aren't losing to much surface area. The Zv5s might move a bit more but the surrounds crinkle all over and lose so much cone area
Deputy93111 yup zv5 have muddy bass because the cone area is basically non existent lol